Steele Rubber Products bumpers, plugs, and grommets are manufactured from dense rubber. These universal boat parts are designed to absorb impact, protect electrical, water and fuel lines passing through sharp edges and to seal any hole to prevent against weather and foreign elements.
If you need a style that is not shown here, please call 800-240-7585 or email us at marine@steelerubber.com. We encourage you to share with us images of your old parts to help in this process.
1" Plastic Plug
p/n: 35-1055-20
This Plastic Plug is designed for various uses. Fully molded to ensure proper fit.
3/4" Plastic Plug
p/n: 35-1053-20
This Plastic Plug is designed for various uses. Fully molded to ensure proper fit.
3/4" Plastic Plug
p/n: 35-1054-20
This Plastic Plug is designed for various uses. Fully molded to ensure proper fit.
1/2" Plastic Plug
p/n: 35-1052-20
This Plastic Plug is designed for various uses. Fully molded to ensure proper fit.
9/16" Multi-Purpose Grommet
p/n: 32-1073-20
This Multi-Purpose Grommet is molded from quality dense rubber to ensure durability. With the generic shape this grommet can be used for a variety of applications.
7/16" Multi-Purpose Grommet
p/n: 32-1065-20
This Multi-Purpose Grommet is molded from quality dense rubber to ensure durability. With the generic shape this grommet can be used for a variety of applications.
1/4" Multi-Purpose Grommet
p/n: 32-1060-20
This Multi-Purpose Grommet is molded from quality dense rubber to ensure durability. With the generic shape this grommet can be used for a variety of applications.
9/16" Multi-Purpose Grommet
p/n: 32-1069-20
This Multi-Purpose Grommet is molded from quality dense rubber to ensure durability. With the generic shape this grommet can be used for a variety of applications.
5/16" Multi-Purpose Grommet
p/n: 32-1061-20
This Multi-Purpose Grommet is molded from quality dense rubber to ensure durability. With the generic shape this grommet can be used for a variety of applications.
7/16" Multi-Purpose Grommet
p/n: 32-1067-20
This Multi-Purpose Grommet is molded from quality dense rubber to ensure durability. With the generic shape this grommet can be used for a variety of applications.
9/32" Multi-Purpose Grommet
p/n: 32-1062-20
This Multi-Purpose Grommet is molded from quality dense rubber to ensure durability. With the generic shape this grommet can be used for a variety of applications.
9/16" Firewall Grommet
p/n: 32-0158-17
This Firewall Grommet is designed from the original part for superior fitment and seal. Designed for firewall applications such as running the hand brake cable through the firewall or the license light through the trunk.
3/8" Multi-Purpose Grommet
p/n: 32-1064-20
This Multi-Purpose Grommet is molded from quality dense rubber to ensure durability. With the generic shape this grommet can be used for a variety of applications.
3/8" Multi-Purpose Grommet
p/n: 32-1058-20
This Multi-Purpose Grommet is molded from quality dense rubber to ensure durability. With the generic shape this grommet can be used for a variety of applications.
5/16" Multi-Purpose Grommet
p/n: 32-1063-20
This Multi-Purpose Grommet is molded from quality dense rubber to ensure durability. With the generic shape this grommet can be used for a variety of applications.
1/4" Multi-Purpose Grommet
p/n: 32-1059-20
This Multi-Purpose Grommet is molded from quality dense rubber to ensure durability. With the generic shape this grommet can be used for a variety of applications.
1-1/4" Plastic Plug
p/n: 35-1056-20
This Plastic Plug is designed for various uses. Fully molded to ensure proper fit.
1/4" Multi-Purpose Bumper
p/n: 60-0734-71
This 9/16" Multi-Purpose Bumper is a quality reproduction of the original factory part. This bumper can also be used Door Lock Striker Plate, Window Glass Stops and License Plate.
1/8" Glovebox Door Bumper
p/n: 33-0128-88
This 5/16" Glovebox Door Bumper is designed from the original part for superior fitment, finish and function. This bumper is commonly used as a glovebox door bumper on GM models.
3/16" License Plate Bumper
p/n: 33-0349-87
This License Plate Bumper is fully molded and designed from the original part for correct fitment and seal. This bumper is made from quality dense rubber to provide excellent durability.
7/8" Firewall Grommet
p/n: 32-0224-21
This Firewall Grommet is fully molded and designed from the original part for superior fitment and seal. This grommet is made from quality dense rubber to provide excellent durability.
5/8" Multi-Purpose Grommet
p/n: 32-1072-20
This Multi-Purpose Grommet is molded from quality dense rubber to ensure durability. With the generic shape this grommet can be used for a variety of applications.
9/16" Multi-Purpose Grommet
p/n: 32-1070-20
This Multi-Purpose Grommet is molded from quality dense rubber to ensure durability. With the generic shape this grommet can be used for a variety of applications.
1/8" Standard Stem Bumper - GM
p/n: 33-0127-41
This 5/16" Standard Stem Bumper is designed from the original part for superior fitment, finish and function. This bumper is commonly used as a console and fuel filler door bumper on GM models.
3/4" Multi-Purpose Grommet
p/n: 32-1068-20
This Multi-Purpose Grommet is molded from quality dense rubber to ensure durability. With the generic shape this grommet can be used for a variety of applications.
3/4" Multi-Purpose Grommet
p/n: 32-1075-20
This Multi-Purpose Grommet is molded from quality dense rubber to ensure durability. With the generic shape this grommet can be used for a variety of applications.
5/8" Multi-Purpose Grommet
p/n: 32-1071-20
This Multi-Purpose Grommet is molded from quality dense rubber to ensure durability. With the generic shape this grommet can be used for a variety of applications.
3/4" Multi-Purpose Grommet
p/n: 32-1074-20
This Multi-Purpose Grommet is molded from quality dense rubber to ensure durability. With the generic shape this grommet can be used for a variety of applications.
7/8" Multi-Purpose Grommet
p/n: 32-1077-20
This Multi-Purpose Grommet is molded from quality dense rubber to ensure durability. With the generic shape this grommet can be used for a variety of applications.
1/4" Trunk Bumper
p/n: 33-0350-87
This 7/8" Trunk Bumper is a quality reproduction of the original factory part. Bumper fits to the rear compartment lid, lower corners on lid. Two (2) per car. Manufactured to OEM specifications to install for an authentic fit, finish, and function.
1" Wiring Grommet
p/n: 32-0401-45
This Wiring Grommet is fully molded and designed from the original part for superior fitment and seal. Designed to run the license light wire through the trunk inner panel.
31/32" Multi-Purpose Grommet
p/n: 32-1066-20
This Multi-Purpose Grommet is molded from quality dense rubber to ensure durability. With the generic shape this grommet can be used for a variety of applications.
13/16" Multi-Purpose Grommet
p/n: 32-1076-20
This Multi-Purpose Grommet is molded from quality dense rubber to ensure durability. With the generic shape this grommet can be used for a variety of applications.
3/8" Firewall Grommet
p/n: 32-0514-20
This Firewall Grommet is fully molded and designed from the original part for superior fitment and seal. Designed for firewall applications such as running the heater vent control cable through the firewall brace.
1/4" Standard Bumper
p/n: 33-0136-42
This Standard Bumper is fully molded from quality dense rubber to provide excellent durability. Commonly used as a door bumper on the center upper post on post model vehicles.
1/4" Hood Bumper
p/n: 33-0003-42
Bumper, hood, 2 uses. Hood to radiator shell at side panel, hood to fender, as required.
3/16" Cowl Vent Louver Bumper
p/n: 33-0348-54
This Cowl Vent Louver Bumper is fully molded and designed from the original part for superior fitment and seal. This bumper is made from high-quality EPDM dense rubber to provide excellent durability.
3/4" Firewall Grommet
p/n: 32-0438-20
This Firewall Grommet is fully molded and designed from the original part for superior fitment and seal. This grommet is made from high-quality EPDM dense rubber to provide excellent durability.
1-1/16" Wiring Grommet
p/n: 32-0369-20
This Wiring Grommet is fully molded and designed from the original part for superior fitment and seal. Designed to run the wiring harness through the fender skirts or hood latch lower mounting panels.
15/16" Multi-Purpose Grommet
p/n: 32-1078-20
This Multi-Purpose Grommet is molded from quality dense rubber to ensure durability. With the generic shape this grommet can be used for a variety of applications.
1/4" Standard Bumper
p/n: 33-0496-71
This Standard Bumper is fully molded and designed from the original part for correct fitment and seal. Designed for applications such as door opening at upper corner, license plate, and fuel filler door. Self-retaining type bumper.
3/16" Trunk Bumper
p/n: 33-0990-87
This Trunk Bumper is a quality reproduction of the original factory part. Self-retaining bumper is manufactured to OEM specifications to install for an authentic fit, finish, and function.
1/4" Trunk Bumper
p/n: 33-0293-87
This 7/8" Trunk Bumper is a quality reproduction of the original factory part. Self-retaining bumper is manufactured to OEM specifications to install for an authentic fit, finish, and function.
3/8" Frame Grommet
p/n: 32-0414-32
This Frame Grommet is fully molded and designed from the original part for superior fitment and seal. Designed for the Bijur Lubricator delivery tube to run thru the frame at various places.
1/4" Inner Fender Bumper
p/n: 33-0512-44
Inner fender to inner splash pan bumper. This bumper is not a generic replacement, and will only be seen when inner fender is removed.
5/16" Hood Bumper
p/n: 33-0031-42
Self-retaining hood bumper, along edge of hood against fender. Up to twenty (20) per car.
1/4" Hood and Door Bumper
p/n: 33-0459-42
This Hood and Door Bumper is fully molded and designed from the original part for superior fitment and seal. Designed for hood to cowl and door hinge pillar upper bumper. May be used in both places.
3/4" Firewall Grommet
p/n: 32-0066-20
This Firewall Grommet is fully molded and designed from the original part for superior fitment and seal. Designed for firewall applications such as running the headlight wire through the fender.
7/16" Wiper Control Grommet
p/n: 32-0317-52
This Wiper Control Grommet is fully molded and designed from the original part for superior fitment and seal. Designed to run the windshield wiper shaft through the body.
7/16" Wiring Grommet
p/n: 32-0366-53
This Wiring Grommet is fully molded and designed from the original part for superior fitment and seal. Designed to run the windshield wiper control cable or gas gauge wire through the rear compartment pan.
7/16" Parking Brake Grommet
p/n: 32-0537-24
This Parking Brake Grommet is fully molded and designed from the original part for superior fitment and seal. This grommet is made from high-quality EPDM dense rubber. Designed for the parking brake release rod.
3/8" Gravel Shield Bumper
p/n: 33-0016-45
Bumper, gravel deflector. Self retaining, round button style, used as anti-rattle to front bumper support bar.
11/16" Gearshift Grommet
p/n: 32-0050-24
This Gearshift Grommet is fully molded and designed from the original part for superior fitment and seal. This grommet is made from high-quality EPDM dense rubber. Designed as an insulator for the gearshift control rod.
5/8" Wiring Grommet
p/n: 32-0970-17
This Wiring Grommet is fully molded and designed from the original part for superior fitment and seal. This grommet is made from high-quality EPDM dense rubber. Designed to run the license light wire through.
1/2" Convertible Rail Grommet
p/n: 32-0132-67
This Convertible Rail Grommet is fully molded and designed from the original part for superior fitment and seal. This grommet is made from high-quality EPDM dense rubber. Designed for the upper side rail when the rails are removable.
1/2" Trunk Floor Pan Plug
p/n: 35-0070-87
This Trunk Floor Pan Plug is fully molded and designed from the original part for superior fitment and seal. This plug is made from high-quality EPDM dense rubber to provide excellent durability.
3/4" Floor Pan Plug
p/n: 35-0262-20
This Floor Pan Plug is fully molded and designed from the original part for superior fitment and seal. This plug is made from high-quality EPDM dense rubber to provide excellent durability. Up to twelve (12) used per vehicle.
3/8" Wiring Grommet
p/n: 32-0352-20
This Wiring Grommet is fully molded and designed from the original part for superior fitment and seal. This grommet is made from high-quality EPDM dense rubber. Designed for the parking brake release rod.
3/8" Utility Body Plug
p/n: 35-0458-45
This Utility Body Plug is fully molded and designed from the original part for superior fitment and seal. This plug is made from high-quality EPDM dense rubber to provide excellent durability.
1-1/4" Multi-Purpose Grommet
p/n: 32-1079-20
This Multi-Purpose Grommet is molded from quality dense rubber to ensure durability. With the generic shape this grommet can be used for a variety of applications.
9/16" Gearshift Bushing
p/n: 32-0051-24
This Gearshift Bushing is fully molded and designed from the original part for superior fitment and seal. This bushing is made from high-quality EPDM dense rubber to provide excellent durability. Designed for the gearshift selector rod.
1/2" Body Hole Plug
p/n: 35-0369-20
This Floor Plug is fully molded and designed from the original part for superior fitment and seal. Designed for shroud or cowl upper panel gauge holes and for various body holes requiring a plug.
11/16" Wiring Grommet
p/n: 32-0047-14
This Wiring Grommet is fully molded and designed from the original part for superior fitment and seal. This grommet is made from high-quality EPDM dense rubber. Designed to run the electric wire through the body for head and taillights.
9/16" Floor Pan Plug
p/n: 35-0171-20
This Floor Pan Plug is fully molded and designed from the original part for superior fitment and seal. This plug is made from high-quality EPDM dense rubber to provide excellent durability.
13/16" Firewall Grommet
p/n: 32-0064-21
This Firewall Grommet is fully molded and designed from the original part for superior fitment and seal. This grommet is made from high-quality EPDM dense rubber to provide excellent durability. Designed to run the vacuum line through the firewall.
31/32" Firewall Grommet
p/n: 32-0133-21
This Firewall Grommet is fully molded and designed from the original part for superior fitment and seal. This grommet is made from high-quality EPDM dense rubber. Designed with wide spacing to pass electrical wiring and cables through metal frame.
3/4" Firewall Grommet
p/n: 32-0162-21
This Firewall Grommet is fully molded and designed from the original part for superior fitment and seal. This grommet is made from high-quality EPDM dense rubber. Designed for firewall applications such as ignition to starter wire through the firewall.
3/4" Firewall Grommet
p/n: 32-0263-17
This Firewall Grommet is fully molded and designed from the original part for superior fitment and seal. Designed for firewall applications such as license lamp wire through the body, parking brake front cable, and idler lever pull rod.
1/2" Firewall Grommet
p/n: 32-0365-20
This Firewall Grommet is fully molded and designed from the original part for superior fitment and seal. This grommet is made from high-quality EPDM dense rubber. Designed for firewall applications such as the vent control cable.
1-5/32" Side Mount Grommet
p/n: 32-0365-37
This Side Mount Grommet is fully molded and designed from the original part for superior fitment and seal. Designed for side tire carrier support arm brackets.
7/8" Sidemount Upper Grommet
p/n: 32-0155-37
This Sidemount Upper Grommet is fully molded and designed from the original part for superior fitment and seal. This grommet is made from high-quality EPDM dense rubber to provide excellent durability.
1-1/4" Side Mount Grommet
p/n: 32-0118-37
This Side Mount Grommet is fully molded and designed from the original part for superior fitment and seal. Designed for sidemount upper brace through the cowl. Also used as a headlight support through the radiator shell.
1-1/8" Multi-Purpose Grommet
p/n: 32-0005-14
This Multi-Purpose Grommet is fully molded and designed from the original part for superior fitment and seal. This grommet is made from high-quality EPDM dense rubber to provide excellent durability. Designed for various applications.
1" Fuel Line Grommet
p/n: 32-0714-41
This Fuel Line Grommet is fully molded and designed from the original part for superior fitment and seal. This grommet is made from high-quality EPDM dense rubber to provide excellent durability. Designed to run the fuel line through the firewall.
3/4" Bearing Grommet
p/n: 32-0342-24
This Bearing Grommet is fully molded and designed from the original part for superior fitment and seal. Designed for clutch release bearing grease tube through side of bell housing.
1-3/32" Standard Grommet
p/n: 32-0167-52
This Standard Grommet is fully molded and designed from the original part for superior fitment and seal. This grommet is made from high-quality EPDM dense rubber to provide excellent durability.
7/8" Trunk Floor Pan Plug
p/n: 35-0402-87
This Trunk Floor Pan Plug is designed for floor construction holes and rest pad for the spare wheel area. Six (6) to eight (8) per car, as required.
1" Utility Plug
p/n: 35-0457-45
This Utility Plug is fully molded and designed from the original part for superior fitment and seal. This plug is made from high-quality EPDM dense rubber to provide excellent durability.
11/16" Wiring Grommet
p/n: 32-0003-21
This Wiring Grommet is fully molded and designed from the original part for superior fitment and seal. This grommet is made from high-quality EPDM dense rubber to provide excellent durability.
1/8" Taillight Bumper
p/n: 33-0556-15
Taillight body upper half and fuel filler cover to lower half bumper.
1-1/16" Firewall Grommet
p/n: 32-0134-20
This Firewall Grommet is fully molded and designed from the original part for superior fitment and seal. Designed for firewall applications such as passing electrical wiring and cables through the frame.
7/8" Wiring Grommet
p/n: 32-0002-21
This Wiring Grommet is fully molded and designed from the original part for superior fitment and seal. This grommet is made from high-quality EPDM dense rubber to provide excellent durability.
11/16" Firewall Grommet
p/n: 32-0112-20
This Firewall Grommet is fully molded and designed from the original part for superior fitment and seal. Designed for firewall applications such as the handbrake cable, heater control cable, and others.
1/4" Radiator Panel Bumper
p/n: 33-0211-31
Lower radiator panel to grille bumper. Also used on radiator valance.