Paint Gasket Set
p/n: 82-0224-44
This comprehensive fifteen (15) piece Paint Gasket Set includes the major seals and gaskets when painting or restoring a classic Camaro. These reproduction parts are designed from originals for superior performance, durability and a factory like fit.
Paint Gasket Set
p/n: 82-0027-44
This comprehensive nineteen (19) piece Paint Gasket Set includes the major seals and gaskets when painting or restoring a classic Camaro. These reproduction parts are designed from originals for superior performance, durability and a factory like fit.
Paint Gasket Set
p/n: 82-0026-44
This comprehensive nineteen (19) piece Paint Gasket Set includes the major seals and gaskets when painting or restoring a classic Camaro. These reproduction parts are designed from originals for superior performance, durability and a factory like fit.
Paint Reseal and Gasket Set
p/n: 70-4310-44
This Paint Reseal Gasket Set contains like original design reproductions for the vehicles specific exterior pieces. These reproductions are die-cut from quality materials to the original design for superior performance, durability, and a factory like fit.
Parking Brake Boot
p/n: 60-0145-24
This Parking Brake Boot is used for the brake lever at the floor. Designed from an original part and molded from EPDM dense rubber for durability and proper fit.
Parking Brake Pedal Pad
p/n: 70-4804-22
This reproduction Parking Brake Pedal Pad slips over the full perimeter of the pedal for a precise, factory fit. A perfect reproduction to replace a worn or damaged original pedal pad.
Parking Light Grommet
p/n: 60-0452-17
Grommet, parking light wiring harness through fender.Length: 3.25 inches.
Parking Light Grommet
p/n: 60-0568-17
Grommet or Nipple, parking light wire from light body. Part of assembly.Length: 1.625 inches.
Parking Light Lens Gasket
p/n: 60-0672-17
This Parking Light Gens Gasket pair is die cut from one-eighth (1/8) inch sponge rubber.
Parking Light Lens Gasket
p/n: 60-0470-17
Gasket, parking light lens. One and one half (1-1/2) inch by four (4) inch.1941: All commercial and utility 1942: Most models Length: 4.0 inches.
Parking Light Lens Gasket
p/n: 60-0207-17
Gasket, parking light lens. Top quality one eighth (1/8) inch sponge.Length: 5.50 inches. Width: 1.75 inches.
Parking Light Lens Gasket
p/n: 60-0206-17
Gasket, parking light lens. Top quality, one eighth (1/8) inch sponge.Length: 6.3125 inches. Width: 2.0 inches.
Parking Light Lens Gasket Set
p/n: 70-4463-36
This Parking Light Lens Gasket set is designed from the original part for superior fitment and seal. These reproduction gaskets fit between the Parking Light Lens and the Parking Light Housing or Bezel.
Parking Light Lens Gaskets
p/n: 70-2306-17
This Parking Light Lens Gasket pair is designed from the original part for superior fitment and seal. This molded reproduction gasket fits between the Parking Light Lens and the Parking Light Housing or Bezel.
Parking Light Mounting Pad
p/n: 60-0007-17
Mounting pads, parking lights.Length: 4.25 inches. Width: 2.375 inches.
Parking Light Mounting Pad
p/n: 60-0204-17
Mounting pad, accessory. Fender parking light.Length: 10.25 inches.
Parking/Backup Light Lens Gaskets
p/n: 70-1272-16
This Parking/Backup Light Lens Gasket pair is designed from the original part for superior fitment and seal. This reproduction gasket fits between the Light Lens and the Housing or Bezel. Die-cut from one-eighth (1/8") inch sponge rubber.
Peel-N-Stick Door Edge Weatherstrip
p/n: 70-0390-WT
This Peel-N-Stick Door Edge Weatherstrip is designed for a specific set of vehicles but with its generic shape, has many uses outside of its original purpose. Available by the foot. Available by the foot.
Peel-N-Stick Door Weatherstrip
p/n: 70-0331-WT
This Peel-N-Stick Door Weatherstrip is made from high-quality EPDM sponge rubber. Available by the foot.
Peel-N-Stick Door Weatherstrip
p/n: 70-0145-WT
This Peel-N-Stick Door Weatherstrip is made from a high-quality EPDM sponge rubber. Available by the foot.
Peel-N-Stick Trunk Weatherstrip
p/n: 70-0773-WT
This Steele exclusive Peel-N-Stick Trunk Weatherstrip is designed from the original part for superior fitment and seal. This easy to install weatherstrip mounts around the full perimeter of the trunk directly to the body.
Peel-N-Stick Trunk Weatherstrip
p/n: 82-0028-WT
This Steele exclusive Peel-N-Stick Trunk Weatherstrip is designed from the original part for superior fitment and seal. This easy to install weatherstrip mounts around the full perimeter of the trunk directly to the body.
Peel-N-Stick Trunk Weatherstrip
p/n: 70-0510-WT
This Peel-N-Stick Trunk Weatherstrip is made from a high-quality EPDM sponge rubber. Available by the foot.
Peel-N-Stick Trunk Weatherstrip
p/n: 70-0774-WT
This Peel-N-Stick Trunk Weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the trunk directly to the body. Easy to install 3M Peel-N-Stick backing provides superior adhesion for reliable performance.
Power Top Cylinder Spacer
p/n: 70-0822-67
This Power Top Cylinder Spacer is used as the folding top power cylinder support. Molded from 100% EPDM dense rubber for durability. Four (4) spacers used per car.
Pressure Ring
p/n: 70-0261-69
Pressure ring (washer), sponge rubber, interior door handle and window regulator escutcheon. One and three fourths (1-3/4) inches outside diameter by three eighths (3/8) inch thick.
Quarter To Side Window Vertical Leading Edge
p/n: 60-0628-80
This quarter and side window Vertical Leading Edge Weatherstrip pair is designed from the original part for superior fitment and seal. This part attaches to the vertical edge of the rear side windows when the rear side windows are fully raised.
Quarter Window Bumper
p/n: 70-1583-62
Bumper, quarter window stop on sash channel.Length: .8125 inches. Width: .75 inches. Height: .50 inches.
Quarter window filler
p/n: 70-2048-67
Filler, quarter window weatherstrip, rear on inner panel. Hard to see part found at bottom of rear side window. Fully molded with metal core.Width: 2.
Quarter Window Filler Weatherstrips
p/n: 70-3433-67
This Quarter Window Filler Weatherstrip pair is for both sides of vehicle. The weatherstrip filler fits to the quarter window on the rear inner panel of convertibles. Original appearance, constructed with a brass core for longevity.
Quarter Window Lock Pillar Fillers
p/n: 60-0602-79
This Quarter Window Lock Pillar Filler pair seals the bottom of the rear side window, and may also be known as a u-jamb or door jamb seal. Fully molded authentic rubber construction with brass metal core.
Quarter Window Lockstrip - BLACK
p/n: 70-3202-52
This Quarter Window Lockstrip is designed from the original part for superior fitment and function. This black lockstrip inserts into the weatherstrip to lock in the window glass. Requires 2 sets per vehicle.
Quarter Window Lockstrip - CHROME
p/n: 70-3203-52
This Quarter Window Lockstrip is designed from the original part for superior fitment and function. This chrome lockstrip inserts into the weatherstrip to lock in the window glass. Requires 2 sets per vehicle.
Quarter Window Trim Moldings
p/n: 70-2435-77
This premium grade PVC Quarter Window Trim Molding pair is designed from the original part for superior fitment. This trim out mounts around the full perimeter of the quarter glass for a precise, factory fit.
Quarter Window U Jamb Door Lock Pillar Fillers
p/n: 70-0982-79
This Quarter Window U Jamb Door Lock Pillar Filler pair seals the bottom of the rear side window. May also be known as a door jamb seal.
Quarter Window Vertical Leading Edge
p/n: 60-0599-80
This quarter and side window Vertical Leading Edge Weatherstrip pair is designed from the original part for superior fitment and seal. A reproduction manufactured to OEM specifications to install for an authentic fit and finish.
Quarter window weatherstrip
p/n: 70-2248-77
Weatherstrip, fixed quarter window. Triangular window between rear passenger area rollup window and stationary rear side window (#70-2144-77).
Quarter window weatherstrip
p/n: 70-2034-77
Weatherstrip, rear door stationary vent window. Fully molded replacement.
Quarter window weatherstrip
p/n: 70-2145-77
Weatherstrip, stationary side window. Fully molded ring made with proper original cross section.
Quarter window weatherstrip
p/n: 70-2520-77
Weatherstrip, stationary side window. Fully molded ring with proper factory style cross sections.
Quarter window weatherstrip
p/n: 60-0453-77
Channel, rear door stationary quarter window, right and left. Molded with all the original features.
Quarter window weatherstrip
p/n: 70-2144-77
Weatherstrip, stationary side window. Fully molded ring made with proper original cross section.
Quarter Window Weatherstrip
p/n: 70-2519-77
This Quarter Window Weatherstrip set contains the left and right seals for two (2) fixed windows on the rear quarter of the vehicle. These weatherstrips are molded with proper cross section for a precise, factory fit.
Quarter window weatherstrip
p/n: 70-2419-77
Weatherstrip, stationary quarter window gasket. Fully molded ring with proper cross section.
Quarter Window Weatherstrip
p/n: 60-0446-77
Weatherstrip, stationary quarter windows. Eight (8) foot strip for two (2) quarter windows. Most models with stationary windows.Length: 96.0 inches.
Quarter Window Weatherstrip
p/n: 70-2421-77
This Quarter Window Weatherstrip set contains the left and right seals for two (2) fixed windows on the rear quarter of the vehicle. These weatherstrips are properly molded with proper cross section for a precise, factory fit.
Quarter window weatherstrip
p/n: 70-2125-77
Weatherstrip, rear quarter stationary vent window. This gasket is for the triangular window just behind the rear door on four (4) door post sedans.
Quarter window weatherstrip
p/n: 70-2032-77
Weatherstrip, rear door stationary window. Fully molded left and right hand replacement.
Quarter window weatherstrip
p/n: 70-3278-77
Weatherstrip, rear stationary side window. Fully molded with proper joints and cross section.
Quarter window weatherstrip
p/n: 70-1773-77
Weatherstrip, stationary quarter window gasket. Fully molded ring with proper cross section.
Quarter window weatherstrip
p/n: 70-2035-77
Weatherstrip, rear stationary side window. Fully molded with proper joints and cross section.
Quarter window weatherstrip
p/n: 70-2030-77
Weatherstrip, rear quarter stationary vent window. This gasket is for the triangular window just behind the rear door.
Quarter Window Weatherstrips
p/n: 60-0281-77
These fixed glass Rear Quarter Window Weatherstrips are sold as a pair for the left and right. The weatherstrips are fully vulcanized for installation ease and a precise, factory fit.
Quarter Window Weatherstrips
p/n: 60-0282-77
This Quarter Window Weatherstrip pair is designed from the original part for superior fitment and seal. This channel weatherstrip mounts around the full perimeter of the quarter glass for a precise, factory fit. For stationary windows only.
Quarter Window Weatherstrips
p/n: 27-0040-77
This Quarter Window Weatherstrips pair is designed from the original part for superior fitment and seal. This seal mounts around the full perimeter of the quarter glass for a precise, factory fit. For fixed, stationary windows only.
Quarter Window Weatherstrips - Stationary
p/n: 70-1760-77
This Quarter Window Weatherstrips pair is designed from the original part for superior fitment and seal. This weatherstrip mounts around the full perimeter of the quarter glass for a precise, factory fit. Fully molded replacement rubber for stationary windows only.
Quarter Window Weatherstrips with Trim Groove
p/n: 70-2481-77
This Quarter Window Weatherstrip with Trim Groove pair is designed from the original part for superior fitment and seal. These Left and Right weatherstrips mount around the full perimeter of the quarter glass for a precise, factory fit. For models WITH reveal molding.
Quarter Window Weatherstrips with Trim Groove
p/n: 70-3568-77
This rear Quarter Window Weatherstrip pair mounts around the full perimeter of the quarter glass. This reproduction has the proper cross section and molded corners for an excellent fit. Designed with a trim groove to be used with chrome reveal moldings.
Quarter Window Weatherstrips with Trim Groove
p/n: 70-2480-77
This Quarter Window Weatherstrip pair is made from ozone resistant EPDM rubber and to the original for an authentic fit and finish. This window weatherstrip has a trim groove for a lockstrip.
Radiator Baffle Seals
p/n: 70-3767-31
This Radiator Baffle Seal pair is designed from the original part for superior fitment and function. Left and Right seals are die cut from quality masticated rubber to authentic original dimensions.
Radiator bracket cushion
p/n: 70-2555-31
Cushions, radiator support, lower. Fully molded, specially designed to duplicate original part.
Radiator bracket cushion
p/n: 70-2554-31
Cushions, radiator support, upper. Fully molded, specially designed to duplicate original part.
Radiator Mounting Insulator Pads
p/n: 70-2238-31
A four (4) piece set of Radiator Mounting Insulator Pads. For use on all four corners of the radiator. For vehicle models with three (3) wide core radiators.
Rally Sport Camaro Paint Gasket Supplement Set
p/n: 82-0225-44
This six (6) piece Rally Sport Camaro Paint Gasket Supplement set contains the RS specific parking light and reverse light gaskets. These die cut foam reproductions are designed from originals for superior performance, durability and a factory fit.
Rear Body Dust & Splash Shield Filler
p/n: 70-3362-45
This two (2) piece Rear Body Dust & Splash Shield filler pair is designed from the original part for superior fitment and seal. Filler pieces are die cut from quality masticated rubber to authentic original dimensions.
Rear Bumper Gravel Shield
p/n: 60-0173-30
This Rear Bumper Gravel Shield, also known as a rear bumper face bar-to-body seal, is made of high quality dense rubber. Fully molded rubber with all original features.
Rear Bumper Gravel Shield
p/n: 60-0213-30
This Rear Bumper Gravel Shield, also known as a rear bumper face bar-to-body seal, is made of high quality dense rubber. This seal is the exact profile as original.
Rear Bumper Grommet
p/n: 60-0143-28
Grommets, rear bumper, curved for good fit. Fully molded rubber.
Rear Bumper Grommet
p/n: 60-0406-28
Grommets, rear bumper. Right and left sides. Left side has clearance for tail light wire.
Rear Bumper Grommet
p/n: 60-0061-28
Grommets, rear bumper, right and left, for round bumper support bracket; left hand grommet has clearance for electrical conduit.
Rear Bumper Step Pad Set
p/n: 70-3637-87
This rear bumper step pad set contains the left, center, and right side step pads in the tailgate opening. They are fully molded with brass cores and designed from originals with factory style tread. All three pieces have correctly placed screw holes and are ready to install.
Rear Bumper to Body Dust Shield Filler
p/n: 70-3363-45
This two (2) piece Rear Bumper To Body Dust Shield filler pair is designed from the original part for superior fitment and seal. Filler pieces are die cut from quality masticated rubber to authentic original dimensions.
Rear Bumper To Body Dust Shield Filler
p/n: 70-3365-30
This two (2) piece Rear Bumper To Body Dust Shield filler pair is designed from the original part for superior fitment and seal. Filler pieces are die cut from quality masticated rubber to authentic original dimensions.
Rear Bumper To Body Filler
p/n: 70-3778-30
This Rear Bumper To Body Filler pair is designed from the original part for superior fitment and seal. Two (2) filler pieces are die cut from quality masticated rubber to authentic original dimensions. These body filler pieces fit between the rear bumper and the vehicle body.
Rear Bumper To Body Filler
p/n: 60-0359-30
This dense rubber Rear Bumper To Body Filler is designed from the original part for a superior fitment. The part is approximately sixty-six (66) inches long and fits between the vehicle body and the rear bumper.
Rear Cargo (Barn) Door Weatherstrips
p/n: 70-1730-72
This Rear Cargo (Barn) Door Weatherstrip (1955-2nd type) set designed from the original part for proper fitment and seal. Designed with fully molded corners, clips and end pieces for superior performance and fitment.
Rear Cargo Door Hinge Gaskets Set
p/n: 60-0659-69
This four (4) piece molded Rear Cargo Door Hinge Gasket Set is made to original specifications for proper fitment. Seals are fully molded from top quality rubber to ensure durability, fitment and proper seal.
Rear Cargo Door Upper Drip Rail
p/n: 70-4180-85
This Rear Cargo Door Upper Drip Rail is a reproduction designed for superior fitment and seal. This drip rail mounts on the upper portion of the body above the rear opening cargo doors.
Rear Cargo Door Upper Weatherstrip
p/n: 70-4703-73
This Rear Cargo Door Upper Weatherstrip is designed from the original part for superior fitment and seal. Push-on type door weatherstrip mounts on the upper portion of the body and seals against the closed cargo doors.
Rear Cargo Door Weatherstrip
p/n: 70-1254-72
Rear Cargo Door Weatherstrip for barn door style rear doors. The part fits around the opening edge, left and right. The part has the proper molded corners and molded ends as with the original.
Rear Cargo Door Weatherstrip - On Body
p/n: 70-4885-73
This Rear Cargo Door Weatherstrip is designed from the original part for superior fitment and function. This weatherstrip mounts on the body to seal the rear cargo doors. It fits at the top and sides of the rear door opening.
Rear Cargo Door Weatherstrip Set
p/n: 90-0154-72
This three (3) piece Rear Cargo Door Set includes the major weatherstrip components needed for the two (2) rear doors of your vehicle project. These parts are reproductions designed from originals with fully molded corners and corrosion resistant brass end pieces for superior performance and a factory fit.
Rear Cargo Door Weatherstrips
p/n: 70-1925-72
This Rear Cargo Door Weatherstrip pair is designed from the original parts for superior fitment and seal. An authentic design with one door made with perimeter configuration, and other door seal made in single strip like original.
Rear Cargo Door Weatherstrips
p/n: 70-4162-72
This two (2) piece Rear Cargo Door Weatherstrip set is for the Rear Cargo (Barn) Doors. It is designed from the original parts for superior fitment and seal. These weatherstrips mount directly to the doors sealing the two together when closed.