Search Results

669 items found matching Buick Roadmaster

Page 8 of 9 ( 669 items )

Spark plug grommet

p/n: 70-1181-21

Grommet, spark plug and coil wire at distributor cap outlets. For seven (7mm) millimeter, later years.

$11.19/ea.

In Stock

Spark plug grommet

p/n: 70-1180-21

Grommet, spark plug & coil wire at distributor cap outlets. For nine (9mm) millimeter wire, earlier years.

$10.39/ea.

In Stock

Splash Apron / A-Arm / Radiator Dust Shield Set

p/n: 70-4679-45

This four (4) piece Splash Apron / A-Arm / Radiator Dust Shield Filler set is designed from the original part for superior fitment, finish, and function. Filler pieces are die cut from quality masticated rubber to authentic original dimensions.

$61.49/set

Allow 1-3 Weeks Ships Separately

Spring Insulator, rear

p/n: 70-3281-35

Spring Insulator, rear

$20.69/ea.

Made to Order Takes 5-7 Days

Stabilizer Bar End Link Set

p/n: 60-0221-33

Twenty-two (22) piece Stabilizer Bar End Link set for both sides of one (1) vehicle, fits front or rear bar. Order two (2) sets for vehicles with front and rear stabilizer bars. Hex head bolt 3/8"-16 NF x 6-15/16" long. Comes with metal sleeve, metal cup washers and rubber grommets.

$28.99/set

In Stock

Stabilizer Bar End Link Set

p/n: 70-0567-34

Twenty-two (22) piece Stabilizer Bar End Link set for both sides of one (1) vehicle, fits front or rear bar. Order two (2) sets for vehicles with front and rear stabilizer bars. Hex head bolt. 5/16"-24NF x 7-5/8" long. Includes metal sleeves, cup washers and rubber grommets.

$81.89/set

In Stock

Stabilizer Bushing

p/n: 50-0520-34

Bushing, stabilizer bracket. Constructed of durable BUNA rubber. One and five eighths inch (1 5/8") length by one and one half inch (1 1/2") outside diameter by three fourths inch (3/4") inside hole diameter.

$76.49/pr.

Made to Order Takes 5-7 Days

Starter solenoid boot

p/n: 70-0371-21

Boot, starter solenoid.

$39.39/ea.

In Stock

Starter Solenoid Cable Rubber Boot

p/n: 70-0704-21

This Starter Solenoid Cable Rubber Boot is designed from the original part for superior fitment and function. This boot covers and protects the battery cable at the starter solenoid connection.

$10.39/ea.

In Stock

Steering Column Floorplate

p/n: 50-0350-36

Floorplate, steering column with metal core. Black rubber. For brown see our #50-0350-89. Width: 6.5 inches.

$218.79/ea.

In Stock

Steering Column Floorplate

p/n: 50-0565-36

Floorplate, steering column at floorboard. Black rubber. For brown (tan) see our #50-0565-89. Made with brass core.Length: 9.375 inches. Width: 5.25 inches.

$242.39/ea.

Made to Order Takes 5-7 Days

Steering Column Floorplate

p/n: 50-0412-36

Floorplate, steering column. Metal core just like the original.

$195.59/ea.

In Stock

Steering Column Floorplate Gasket

p/n: 70-3126-36

This Steering Column Floorplate Gasket is designed from the original part for superior fitment and sealing. This part fits around the steering column to seal the column through the body floor pan. Gasket with metal core.

$199.99/ea.

Made to Order Takes 5-7 Days

Steering Column Gasket - Automatic Transmission

p/n: 70-4467-36

This Steering Column gasket is designed from the original part for superior fitment and sealing. Gasket is machine cut from quality sponge rubber to authentic original dimensions. This part fits around the steering column to seal the column through the body floor pan.

$16.99/ea.

Steering Column Grommet

p/n: 70-2516-36

Grommet, steering column to dash at floorboard. Black rubber. For brown see our #70-2516-89. Fully molded with correct metal core.

$189.19/ea.

Made to Order Takes 5-7 Days

Steering Knuckle Support Seal

p/n: 50-0199-35

This Steering Knuckle Support Seal is designed from the original part for an authentic fit, finish, and appearance. Fits at the steering knuckle support at the upper pivot pin. Four (4) required per car.

$9.99/ea.

In Stock

Steering Knuckle Support Seal

p/n: 50-0525-36

Seal, steering knuckle support, upper or lower. Die cut one fourth (1/4) inch, four (4) used per car.Height: .25 inches.

$7.99/ea.

In Stock

Strut Rod Bushing

p/n: 50-0522-27

Bushing, strut rod at drive shaft tube. Two (2) per car required.Length: 1.65625 inches.

$16.59/ea.

In Stock

Sun visor end plug

p/n: 70-0330-89

End plug, swing-type sun visor tube. Brown only.

$9.69/ea.

In Stock

Support Arm Bumper

p/n: 50-0526-32

Bumper, lower support arm. With metal core and attaching bolt. One (1) pair per car.Width: 2.4375 inches. Height: 4.0 inches.

$104.99/pr.

In Stock

Suspension Bumper - Front Lower Control Arm

p/n: 50-0092-32

This Suspension Bumper is designed from the original part for superior fitment and function. Bumper mounts to the front suspension lower control arm. Two (2) per car required.

$62.79/ea.

In Stock

Taillight Gasket

p/n: 50-0355-15

Gasket, rear stop and turn signal. Four (4) piece set required per car.

$71.99/set

Made to Order Takes 5-7 Days

Taillight Lens Gasket

p/n: 50-0449-15

Gasket, taillight lens. Die cut from three sixteenths (3/16) inch sponge.Width: 8.75 inches. Height: 3.875 inches.

$39.59/pr.

Made to Order Takes 5-7 Days

Taillight Lens Gasket

p/n: 50-0197-15

Gasket, taillight lens, one fourth (1/4) inch thick sponge rubber.

$63.69/pr.

Made to Order Takes 5-7 Days

Taillight Lens Gasket

p/n: 50-0411-15

Gasket, taillight lens. Die cut three sixteenths (3/16) inch sponge rubber as original.Width: 6.25 inches. Height: 3.25 inches.

$29.49/pr.

Made to Order Takes 5-7 Days

Taillight Lens Gasket

p/n: 50-0093-15

Mounting pad, taillight lens. Width: 7.75 inches.

$69.99/pr.

Made to Order Takes 5-7 Days