Stabilizer Bar End Link
p/n: 20-0782-33
This Front Stabilizer Bar End Link is used to smooth the transfer between the sway bar and the control arm. Two (2) end links required per truck. For 4x2 (2 wheel drive) models.
Stabilizer Bar End Link Repair Set
p/n: 20-0783-33
This five (5) piece Stabilizer Bar End Link Repair Set is for the front or rear stabilizer bar. Two (2) per set. Used on Front for 1975-1979 F150-F350 series 4x2. Used on Rear for 1980-1989 F100-F350 series.
Stabilizer Bar End Link Set
p/n: 60-0221-33
Twenty-two (22) piece Stabilizer Bar End Link set for both sides of one (1) vehicle, fits front or rear bar. Order two (2) sets for vehicles with front and rear stabilizer bars. Hex head bolt 3/8"-16 NF x 6-15/16" long. Comes with metal sleeve, metal cup washers and rubber grommets.
Stationary quarter window seal
p/n: 70-3510-77
Rear stationary quarter window seals. Fully molded like the originals.
Stationary Rear Quarter Window Gaskets
p/n: 20-0822-77
This Stationary Rear Quarter Window Gasket pair mounts around the full perimeter of the rear quarter glass and has properly molded corners for a precise, factory fit. For truck models WITH Stainless molding.
Stationary Rear Quarter Window Gaskets
p/n: 20-0823-77
This Rear Quarter Window Gasket pair mounts around the full perimeter of the rear quarter glass and has properly molded corners for a precise, factory fit. For truck models WITH Flexible Plastic Chrome molding.
Stationary Rear Quarter Window Gaskets
p/n: 20-0821-77
This Rear Quarter Window Gasket pair mounts around the full perimeter of the rear quarter glass and has properly molded corners for a precise, factory fit. For truck models WITHOUT Chrome molding.
Steel Sash Channel - Right Front Door
p/n: 20-0811-58
This reproduction Steel Sash Channel is designed from the original part for superior fitment and function. This Right Front Door channel fits in the bottom of door for the glass to sit in.
Steel Sash Channel, Left Side
p/n: 20-0810-58
This reproduction Steel Sash Channel is designed from the original part for superior fitment and function. This channel is for the Left Side only.
Steering Column - Floor Seal
p/n: 70-3358-36
This Steering Column is designed from the original part for superior fitment and sealing. Seal part is die cut from quality masticated rubber to authentic original dimensions. This part fits around the steering column to seal the column through the body floor pan inside the vehicle.
Steering Column At Floor Seal
p/n: 70-3490-36
This Steering Column At Floor Seal is designed from the original part for superior fitment and sealing. The seal is die cut from quality masticated rubber to authentic original dimensions. This part fits around the steering column to seal the column through the body floor pan.
Steering Column Floor Seal
p/n: 70-4072-88
This Steering Column Floor Seal is manufactured from die cut masticated rubber to authentic original dimensions. For models with Manual and Power Steering.
Sun Visor Tips
p/n: 20-2882-88
These Sun Visor Tips are reproductions manufactured to OEM specifications to install for an authentic fit, finish and function. Sold as a pair.
Sunroof - On Body Weatherstrip
p/n: 70-4650-45
This Sunroof - On Body Weatherstrip is designed from the original part for superior fitment and seal. With push-on installation, the weatherstrip fits onto the molding channel that follows the sunroof trim on the body of the car. Seals the interior / exterior to prevent water, debris, and road noise infiltration.
Sunroof - On Glass Weatherstrip
p/n: 70-4649-45
This Sunroof - On Glass Weatherstrip is designed from the original part for superior fitment and seal. With push-on installation this weatherstrips wraps around the entirety of the sunroof glass. Weatherstrip seals the interior / exterior to prevent water, debris, and road noise infiltration.
Swing-Out Quarter Window Weatherstrips
p/n: 70-4124-76
This Swing-Out Quarter Window Weatherstrip pair is not a reproduction of an OEM part, but rather an expertly engineered solution specific for this application. Guaranteed performance and "factory-like" look.
Tailgate Bumper
p/n: 20-0801-45
This Tailgate Bumper is used as a retaining support. Two (2) are required per truck.
Tailgate Bumper
p/n: 20-0694-45
These Tailgate Bumpers are sold as pair. The bumpers fit in brackets and comes with chains.
Tailgate To Body Weatherstrip
p/n: 70-4020-45
This Tailgate To Body Weatherstrip is properly molded from originals for a factory like fit and appearance.
Tailgate Weatherstrip
p/n: 70-3009-84
This Tailgate Weatherstrip is designed from the original part for superior fitment and seal. The seal mounts to the sides and bottom of the tailgate with properly spaced plastic clips. Includes molded ends.
Tailgate Weatherstrip
p/n: 70-2434-72
This Tailgate Weatherstrip reproduction is designed from the original part for superior fitment and seal. This weatherstrip mounts on three (3) sides of the tailgate with weatherstrip adhesive (not included).
Tailgate Window Felt Weatherstrips
p/n: 80-1058-57
This Tailgate Window Felt Weatherstrip reproduction set is designed from the original part for superior fitment and seal. This window felt molding mounts to the tailgate with attached clips. These window felts wipe the tailgate window glass when the glass is lowered.
Taillight Housing To Body Gaskets
p/n: 70-4544-15
This Taillight Housing to Body Gasket pair is designed from the original part for superior fitment and seal. These reproduction seals fits between the taillight housing and the vehicle body to keep water and debris out of the trunk or hatch.
Transmission Mount
p/n: 70-2058-25
This Transmission Mount is a new aftermarket replacement mount manufactured to meet or exceed factory specifications.. One (1) required per vehicle.
Trunk Bumpers - Coupe or Convertible
p/n: 70-4732-87
This Trunk Bumper pair is a quality reproduction of the original factory part. These dense rubber bumpers attach to the vehicle body to support / cushion the trunk lid closure.
Trunk Weatherstrip
p/n: 70-3346-84
This Trunk Weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the trunk directly to the body.
Trunk Weatherstrip
p/n: 70-3347-84
This Trunk Weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the trunk directly to the body.
Trunk Weatherstrip
p/n: 82-0033-84
This Trunk Weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the trunk directly to the body.
Trunk Weatherstrip
p/n: 82-0028-84
This Trunk Weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the trunk directly to the body.
Trunk Weatherstrip
p/n: 20-2865-84
This Trunk Weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the trunk directly to the body.
Trunk Weatherstrip
p/n: 70-2124-84
This Trunk Weatherstrip is designed from the original part for superior fitment and seal. The weatherstrip mounts around the full perimeter of the trunk directly to the body.
Trunk Weatherstrip
p/n: 20-0302-84
This Trunk Weatherstrip is designed from the original part for superior fitment and seal. The decklid weatherstrip mounts around the full perimeter of the trunk directly to the body.
T-Top On Body Weatherstrips
p/n: 83-1002-68
This T-Top Body Weatherstrip pair is designed from the original part for superior fitment and seal. This part fits on the body of the vehicle and seals the front section of the side window and the removable section of the roof.
T-Top Panel Weatherstrips
p/n: 82-0175-68
This T-Top Panel Weatherstrip pair installs around the perimeter of the removable T-Top Panels. Includes molded corners and steel cores across window side. Fits later integral metal retainer / 18 plastic push pins T-Top panels.
T-Top Roof Rail Weatherstrips - FISHER Tops
p/n: 82-0057-72
This T-Top Roof Rail Weatherstrip pair is for models with FISHER style T-Top hatch seals with One-Handle release. These reproduction seals are designed from the original part for positive fitment and seal. Weatherstrips are fully molded with accurate fitting corners and smooth skin sponge rubber construction.
T-Top Roof Side Rail Weatherstrips
p/n: 83-1003-68
This T-Top Roof Side Rail Weatherstrip pair is designed from the original part for superior fitment and seal. This weatherstrip serves as the over door seal, attaching to the removeable roof section.
T-Top Side Rail Weatherstrips - FISHER Tops
p/n: 82-0179-68
This T-Top Side Rail Weatherstrip pair is for models with FISHER style T-Top hatch seals with One-Handle release. These reproduction seals are designed from the original part for positive fitment and seal. Fully molded with smooth skin sponge rubber construction.
T-Top Weatherstrip Set
p/n: 70-4340-68
This complete eight (8) piece T-Top Weatherstrip Set is designed from the original part for superior fitment and seal. These high-quality weatherstrips fit and work to seal the lift-off T-Top roof panels and side windows when the window is fully raised.
Turn signal light gasket
p/n: 20-0749-16
Gaskets, side marker light. Front and rear. Four (4) piece set.
U Jamb Lock Pillar Filler
p/n: 70-3887-79
This U Jamb Door Lock Pillar Filler pair is designed from the original part for superior fitment and sealing. This right and left weatherstrip filler mounts at the bottom of the rear side window, lower leading edge to seal the rear quarter window. Also known as a door jamb seal.
Ulta-Mat Heat and Sound Deadener Set
p/n: 70-4788-88
This Ulta-Mat Heat and Sound Deadener Underlayment Set includes die cut underlayment pieces for the floor, doors, quarter, and roof panels. Underlayment pieces are made from a flexible and lightweight foil facing foam rubber sound and heat insulation material.
Upper Door Weatherstrips - Top of Door
p/n: 20-0819-72
This Upper Door Weatherstrip pair is designed from the original parts for superior fitment and seal. Used as an upper / top of door weatherstrip on both doors. This part was used on 1978-1979 Ford Trucks but can also be retrofitted to 1973-77 Ford Pickups as well to improve the door seal.
Upper Windshield Corner Molding
p/n: 20-0806-52
This Upper Windshield Corner Molding pair fits the Left and Right Upper Corner. If your corner molding is starting to show it's age, get that factory look back with these new trim corners.
Vent division bar weatherstrip
p/n: 70-3780-56
Front vent window division post seal. Fully molded with metal core and pre-drilled holes. This part fits opposite the glass run channel and seals the vent window when the vent is closed. See Front door vent weatherstrip for main rubber seal.
Vent Window Division Post Weatherstrips
p/n: 70-1923-56
This Front Vent Window Division Post Weatherstrip pair is designed from the original part for superior fitment and seal. This piece mounts on the vertical division bar with rivets and the vent glass closes against it.
Vent Window Pivot Post Rivet
p/n: 70-4757-98
This Vent Window Pivot Post Rivet is used to replace the hinge pivot rivet for both left and right vent window assemblies. Commonly used for General Motors car and truck models.
Vent Window Rebuild Set
p/n: 70-4801-70
This Vent Window Rebuild Set includes glass setting tape (1/16 thick), hinge pivot step rivet pair, and a rivet peening punch. The set has enough materials for both the passenger side and driver side vent window assemblies.