Rear Bumper Step Pad Set
p/n: 70-3637-87
This rear bumper step pad set contains the left, center, and right side step pads in the tailgate opening. They are fully molded with brass cores and designed from originals with factory style tread. All three pieces have correctly placed screw holes and are ready to install.
Tailgate Window Felt Weatherstrip
p/n: 80-0294-57
Tailgate window horizontal seal. These strips wipe the tailgate window when the glass is lowered. They come ready to install with finished ends and body curvature bends.
Tailgate Window Felt Weatherstrip
p/n: 80-0289-57
Tailgate window horizontal seal. These strips wipe the tailgate window when the glass is lowered. They come ready to install with finished ends and body curvature bends.
Tailgate Window Felt Beltline Weatherstrips
p/n: 80-0804-57
This Tailgate Glass Window Felt Beltline Weatherstrip reproduction pair is designed from the original part for superior fitment and seal. This window felt molding mounts to the tailgate with the included fasteners.
Upper Back Panel And Finish Panel Weatherstrip
p/n: 70-3966-85
This Upper Back Panel And Finish Panel Weatherstrip is designed from original parts for superior fitment and seal. This weatherstrip mounts directly to the body and the finish panel to seal the front edge of the trunk near the convertible top.
Rear Glass Run Channel
p/n: 70-5068-58
This Rear Glass Run Channel is designed from the original part for an authentic fit, finish, and appearance. The glass run simply presses into the channel in the rear of the shell, the glass then rolls up into this piece.
Window Felt Tailgate Beltline Weatherstrips
p/n: 80-0716-57
This Window Felt Tailgate Beltline Weatherstrip reproduction pair is designed from the original part for superior fitment and function. This window felt beltline moulding mounts to the tailgate with clips, tabs and (included) screws. These strips wipe the tailgate window glass when the glass is lowered.
Tailgate Outer Window Felt Weatherstrip
p/n: 80-0011-57
This reproduction Original material Tailgate Glass Outer Window Felt Weatherstrip is designed from the original part for superior fitment and seal. This flat chrome bead outer window felt wipes the outside tailgate window glass when the glass is lowered.
Tailgate Window Outer Beltline Rubber Weatherstrip
p/n: 80-0793-57
This Tailgate Glass Outer (Only) Window Beltline Rubber Weatherstrip reproduction is designed from the original part for superior fitment and seal. This beltline molding mounts to the tailgate with tabs. This window rubber wipes the tailgate window glass when the glass is lowered.
Tailgate To Body Weatherstrip
p/n: 70-4020-45
This Tailgate To Body Weatherstrip is properly molded from originals for a factory like fit and appearance.
Tailgate Window Felt Beltline Weatherstrips
p/n: 80-1082-57
This reproduction authentic style Tailgate Window Felt Beltline Weatherstrip pair is designed from the original part for superior fitment and function. These Innner and Outer anti-rattler window felts wipe the tailgate window glass when the glass is lowered.
Window Felt Tailgate Beltline Weatherstrips
p/n: 80-0718-57
This two (2) piece Window Felt Tailgate Beltline Weatherstrip reproduction pair is designed from the original part for superior fitment and seal. This inner and outer window felt molding mounts to the tailgate with pre-attached clips. These window felts wipe the tailgate window glass when the glass is lowered.
Rear Glass Run Channel
p/n: 70-5069-58
This Rear Glass Run Channel is designed from the original part for an authentic fit, finish, and appearance. The glass run simply presses into the channel in the rear of the shell, the glass then rolls up into this piece.
Tailgate run channel filler
p/n: 70-3302-87
Tailgate glass run channel, upper molded section, left and right. Molded piece with metal core ready to attach to tailgate window run channel.
Rear Shield to Bumper Seal
p/n: 30-0476-44
This Rear Shield to Bumper Seal is made of high quality EPDM dense rubber. The seal is designed from an original part so it fits correctly. Overall length is seven (7) feet.
Tailgate Weatherstrip Filler
p/n: 70-2056-87
Filler, tailgate weatherstrip at beltline, on body. Fully molded with holes for attaching pins.Length: 4.0 inches.
Tailgate Bumper
p/n: 20-1528-87
This Tailgate Bumper is quality reproduction of the original factory part. This rubber bumper attaches to the vehicle body to support / cushion the tailgate closure. Includes right and left bumpers & corresponding attaching screws.
Tailgate Drain Seals - Body Side
p/n: 70-4008-85
This Tailgate Drain Seals - Body Side seal pair includes both right and left sides. These seals are properly molded from originals for a factory like fit.
Tailgate Glass Run Channel
p/n: 70-3001-58
This Tailgate Glass Run Channel presses into the channel in the rear of the shell and the glass then rolls up into the run channel. Made from original specs and from high quality ozone resistant materials to fit your vehicle.
Tailgate Glass Run Channels
p/n: 70-5070-58
This Tailgate Glass Run Channel pair is designed from the original part for an authentic fit, finish, and appearance. These run channel pieces are made from mohair felt with a tape backing.
Tailgate End Caps
p/n: 70-5066-87
This Tailgate End Cap pair is designed from the original part for an authentic fit, finish, and appearance. These glass guide channel end caps attach to the right and left sides of the tailgate and helps guide the glass when it is raised and lowered.
Tailgate Bumper Set
p/n: 70-4494-87
This four (4) piece Tailgate Bumper Set is designed from the original part for superior fitment and function. These bumpers fit on each side of the body to tailgate opening at the bottom of the opening and on each side.
Tailgate to Body Bumpers
p/n: 70-4493-87
This Tailgate to Body Bumper pair is designed from the original part for superior fitment and function. This body bumper fits on each side of the body to tailgate opening on the body and adjacent to the striker knob on each side.
Upper Tailgate Bumpers
p/n: 70-2122-87
This Upper Tailgate Bumper pair is designed from the original part for superior fitment, finish and function. Fully molded with authentic details and appearance.
Trunk Spring Bumpers
p/n: 70-4736-87
This Trunk Spring Bumper pair is a quality reproduction of the original factory part. These trunk springs feature high-quality metal construction and a durable rubber bumper that helps to eliminate metal to metal contact.
Rear Bumper Filler
p/n: 27-0095-30
Filler, rear bumper to body. Die cut three thirty seconds (3/32) inch rubber to original profile.
Tailgate Lock Base Gasket
p/n: 70-4965-86
This reproduction Tailgate Lock Base Gasket is die-cut from quality materials to the original design for superior performance, durability, and a factory like fit. Commonly used during a vehicle re-paint.
Tailgate Drain Seals
p/n: 70-4007-84
This Tailgate Drain Seal pair includes right and left sides that install at the bottom of the tailgate. These seals are properly molded from originals for a factory like fit.
Tailgate weatherstrip
p/n: 20-1526-87
Weatherstrip, tailgate lower glass sash channel. Goes between glass and channel.
Tailgate Glass Lower Bumper
p/n: 70-5015-87
This Tailgate Glass Lower Bumper pair is designed from the original part for an authentic fit, finish, and appearance. These bumper stops install in the lower tailgate to cushion the glass when lowered down.
Rear Hatch Door Bumpers
p/n: 70-4731-87
This Rear Hatch Door Bumper pair is a quality reproduction of the original factory part. These adjustable rubber bumpers attach to the rear hatch door to prevent the hatch lid from vibrating.
Rear Liftgate Bumpers
p/n: 70-4833-87
This fully molded Rear Liftgate Bumper pair is a quality reproduction of the original factory part. These two (2) rubbers bumpers attach to the vehicle rear liftgate to support / cushion the liftgate closure.
Tailgate bumper
p/n: 70-2854-87
Bumper, tailgate support. Two (2) bumpers mount on tailgate and two (2) mount on body in lower sections. Four (4) required.
Rear Hatch Door Bumpers
p/n: 70-4730-87
This Rear Hatch Door Bumper pair is a quality reproduction of the original factory part. These adjustable rubber bumpers attach to the rear hatch door to prevent the hatch lid from vibrating.
Tailgate wedge
p/n: 70-2855-87
Wedge, tailgate bumper anti-rattler. Mounts on both end jamb areas on tailgate.
Tailgate Chain Bumpers
p/n: 20-0694-45
This fully molded Tailgate Chain Bumper is a quality reproduction of the original factory part. Bumpers are sold as pair. The bumpers fit in brackets.
Tailgate Bumper
p/n: 70-1910-87
This Tailgate Bumper is designed from the original part for superior fitment, finish and function. This station wagon tailgate bumper is commonly used on GM station wagon models.
Tailgate Bumper
p/n: 20-0801-45
This Tailgate Bumper is used as a retaining support. Two (2) are required per truck.
Tailgate Handle Gasket
p/n: 70-3867-86
This Tailgate Handle Gasket is die-cut sponge rubber to authentic original dimensions.
Tailgate Bumper - Upper and Lower
p/n: 70-1827-87
This upper / lower Tailgate Bumper is designed from the original part for superior fitment and seal. Fully molded with top quality EPDM rubber over corrosion resistant brass cores to ensure durability and function.
Door Handle Mounting Pad
p/n: 20-0577-86
Outside Door Handle Mounting Pad - Designed from an original part so it fits correctly.
Rear Liftgate Bumper
p/n: 70-4961-87
This Rear Liftgate Bumper is designed from the original part for superior fitment, finish and function. This bumper fits on the liftgate and is made from high quality ozone resistant EPDM rubber. Sold as a single piece.
