Front Door Vent Window Upper Bumpers
p/n: 70-4794-62
This Front Door Vent Window Upper Stop Bumper pair is designed from the original part for superior fitment and function. Fits at the top of the front door vent window frame. Fully molded over a brass metal core.
Rear Door Lower Corner Seals
p/n: 70-4208-70
This Rear Door Lower Corner Seal pair is designed from the original part for superior fitment and sealing. This dogleg shaped seal attaches at the lower rear corner of the rear door openings approximate to the rear door hinges left and right.
Side Window Vertical Leading Edge
p/n: 70-2834-80
This quarter to side window Vertical Leading Edge Weatherstrip pair is designed from the original part for superior fitment and seal. This part attaches to the vertical edge of the rear side windows when the rear side windows are fully raised.
Trunk Lid Weatherstrip
p/n: 70-2835-84
This Trunk Lid Weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the trunk lid.
Rumble Seat Weatherstrip
p/n: 14-0051-87
Weatherstrip or rubber buffer, rumble seat opening notch-out on perimeter of opening near water catch rail. Two (2) used per car.
Fender Skirt Edge Weatherstrip
p/n: 20-0111-44
This Fender Skirt Edge Weatherstrip pair is designed from the original part for superior fitment, finish and sealing function. Two five (5) foot strips that fit between the rear wheel fender skirt and rear quarter panel.
Rear Bumper to Lower Back Panel Splash Shield
p/n: 70-3655-47
This Rear Bumper To Lower Back Panel Splash Shield is designed from the original part for superior fitment and seal. This filler attaches to the rear edge of the lower deck lid panel.
Hood-To-Cowl Weatherstrip
p/n: 70-3294-43
This Hood-To-Cowl Weatherstrip attaches under cowl scuttle molding.
Rear Bumper Stone Shield
p/n: 70-3033-30
This Rear Bumper Stone Shield Deflector mounts behind the rear bumper between body and bumper. This reproduction part is designed from the original part to fit correctly.
Front Bow Weatherstrip
p/n: 70-4088-64
This Front Bow Weatherstrip is designed from the original part for superior fitment and seal. This seal installs directly to the convertible top to seal between the soft top and the top of the windshield.
1961-1963 Lincoln Factory Shop Manual, CD
p/n: 07-1277-07
This FORD-Licensed Detroit Iron CD contains the most comprehensive set of digital OEM shop manuals. The factory manuals on this CD were professionally scanned from the original service and parts manuals.
1964 Lincoln Factory Shop Manual, CD
p/n: 07-1278-07
This FORD-Licensed Detroit Iron CD contains the most comprehensive set of digital OEM shop manuals. The factory manuals on this CD were professionally scanned from the original service and parts manuals.
1965 Lincoln Factory Shop Manual, CD
p/n: 07-1279-07
This FORD-Licensed Detroit Iron CD contains the most comprehensive set of digital OEM shop manuals. The factory manuals on this CD were professionally scanned from the original service and parts manuals.
1966 Lincoln Factory Shop Manual, CD
p/n: 07-1280-07
This FORD-Licensed Detroit Iron CD contains the most comprehensive set of digital OEM shop manuals. The factory manuals on this CD were professionally scanned from the original service and parts manuals.
1967-68 Lincoln Factory Shop Manual, CD
p/n: 07-1281-07
This FORD-Licensed Detroit Iron CD contains the most comprehensive set of digital OEM shop manuals. The factory manuals on this CD were professionally scanned from the original service and parts manuals.
1969 Lincoln Factory Shop Manual, CD
p/n: 07-1282-07
This Lincoln-Mercury FORD-Licensed Detroit Iron CD contains the most comprehensive set of digital OEM shop manuals. The factory manuals on this CD were professionally scanned from the original service and parts manuals.
1970 Lincoln-Mercury Factory Shop Manual, CD
p/n: 07-1283-07
This Lincoln-Mercury FORD-Licensed Detroit Iron CD contains the most comprehensive set of digital OEM shop manuals. The factory manuals on this CD were professionally scanned from the original service and parts manuals.
1971 Lincoln-Mercury Factory Shop Manual, CD
p/n: 07-1284-07
This Lincoln-Mercury FORD-Licensed Detroit Iron CD contains the most comprehensive set of digital OEM shop manuals. The factory manuals on this CD were professionally scanned from the original service and parts manuals.
1972 Lincoln-Mercury Factory Shop Manual, CD
p/n: 07-1285-07
This Lincoln-Mercury FORD-Licensed Detroit Iron CD contains the most comprehensive set of digital OEM shop manuals. The factory manuals on this CD were professionally scanned from the original service and parts manuals.
Trunk Weatherstrip
p/n: 82-0217-84
This Trunk Weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the trunk directly to the body.
Cowl Vent Gasket
p/n: 14-0037-54
Gasket stock, cowl vent, high grade sponge of proper cross-section, (not molded into ring), approximately forty eight (48) inch strip per car.
Trunk Lid Weatherstrip
p/n: 20-0042-84
This Trunk Lid Weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the trunk lid.
Front Bow Weatherstrip
p/n: 70-3659-64
This Front Bow Weatherstrip provides the seal between the convertible top and the top of the windshield. The piece is designed from the original part for superior fitment and seal.
Front Lower Control Arm Bumper
p/n: 20-0202-32
This Front Lower Control Arm Bumper is designed from the original part for superior fitment, finish, and function. This suspension bumper mounts to the front lower control arm to prevent metal to metal contact.
Accelerator Lever to Accelerator Shaft Seal
p/n: 70-4098-40
This Accelerator Lever to Accelerator Shaft Seal is designed from the original part for superior fitment and seal. This seal mounts directly to cover and protect the accelerator lever to accelerator shaft rod linkage connection.
Brake Pedal Pad
p/n: 70-4286-22
This reproduction Pedal Pad fits over the full perimeter of the brake pedal for a precise, factory fit. Uses original metal trim piece to replace aged and worn original brake pedal pads. Detailed and finished to match the original appearance.
Cowl Vent Gasket
p/n: 14-0027-54
Gasket, cowl vent, quality sponge, five sixteenths (5/16) inch by one half (1/2) inch cross section, forty five (45) inch developed length.
Hood To Cowl Weatherstrip
p/n: 70-3023-43
This Hood To Cowl Weatherstrip attaches under cowl scuttle molding.
Hood to Cowl Weatherstrip
p/n: 70-2722-43
This Hood to Cowl Weatherstrip is designed from the original part for superior fitment and seal. A reproduction using sponge rubber extrusion and pre-installed fastener clips.
Voltage Regulator Cover Shield
p/n: 70-4531-17
This Voltage Regulator Cover Shield is designed from the original part for superior fitment and function. This cover shield is located over and above the voltage regulator.
Taillight Lens Gaskets
p/n: 70-3989-15
This Taillight Lens Gasket pair is designed from the original part for superior fitment and seal. These reproduction gaskets fit between taillight lens & taillight housing.
Door Hinge Bumper Set
p/n: 70-4871-71
This Door Hinge Bumper Set is a quality reproduction of the original factory part. These sixteen (16) rubber bumpers attach four (4) per door to cushion the door closure action.
Front Fender To Fender Apron Dust Shields
p/n: 70-4462-44
This Front Fender To Fender Apron Dust Shield pair is designed from the original part for superior fitment and use. Left and Right shield pieces function as front fender apron upper reinforcement to fender seals.
Antenna Mount Pad
p/n: 70-4199-21
This Antenna Mount Pad is a high-quality reproduction of the original factory part. This mount pad installs between the antenna mounting base and fender to protect the painted surface.
Rear Door Lock Pillar Filler
p/n: 70-3037-70
This Rear Door Lock Pillar Filler attaches to front upper corner of rear door(s) with two (2) screws. This reproduction part is fully molded and has a corrosion resistant brass core.
Trunk Decklid Weatherstrip
p/n: 20-0095-84
This Trunk Decklid Weatherstrip is designed from the original part for superior fitment and seal. The weatherstrip mounts around the full perimeter of the trunk directly to the body.
Trunk Weatherstrip
p/n: 20-0302-84
This Trunk Weatherstrip is designed from the original part for superior fitment and seal. The decklid weatherstrip mounts around the full perimeter of the trunk directly to the body.
Undercarriage Cross Member Dust Shields
p/n: 70-4626-45
This Undercarriage Dust Shield pair is designed from the original part for superior fitment and appearance. Filler pieces are die cut from durable fabric reinforced rubber as original.
Heater Core Housing To Firewall Gasket
p/n: 70-4473-31
This Heater Core Housing To Firewall gasket is designed from original parts for superior fitment and sealing. This quality manufactured gasket fits to seal the heater core housing to the vehicle firewall.
AC Condenser - Lower Mount
p/n: 70-2713-31
This AC Condenser - Lower Mount pair is designed from the original part for superior fitment and function. These mounts install to isolate and reduce road vibrations to the air conditioning condenser. Replaces aged, broken or missing mounts.
Wiring Grommet Boots
p/n: 70-4712-21
This Wiring Grommet Boot pair is designed from the original part for superior fitment and function. This protective wiring grommet boot can be found below the vehicle's package tray and at the quarter window pillar.
Trunk Bumpers - Convertible
p/n: 70-4663-87
This Trunk Bumper pair is a quality reproduction of the original factory part. This rubber bumper attaches to the trunk decklid to support / cushion the trunk lid closure onto the vehicle body.
Hood To Fender Bumper Set
p/n: 70-3022-42
This four (4) piece Hood to Fender Bumper Set is a quality reproduction of the original factory part. This rubber bumper attaches to the hood to support / cushion the hood closure.
Door Handle Gasket Set
p/n: 70-3036-69
This Door Handle Gasket Set is designed from the original part for superior fitment and seal. One (1) gasket set will do either front or rear two (2) doors.
Hood To Cowl Bumpers
p/n: 70-4744-42
This Hood To Cowl Bumper pair is a quality reproduction of the original factory part. This rubber bumper pair attaches to the body cowl to support / cushion the hood closure.
Door Bumper
p/n: 70-3035-71
This Door Bumper is designed from the original part and attaches to door with single screw. Typically requires two (2) or four (4) bumpers per vehicle depending on the vehicles year of manufacture.
Air Vent Gasket Set
p/n: 70-4472-31
This Air Vent Gasket set is designed from original parts for superior fitment and sealing. These quality manufactured gaskets fit to seal the two (2) conditioned air assemblies for interior comfort.
Heater Core Gasket Set
p/n: 70-4471-31
This three (3) piece Heater Core Gasket set is designed from original parts for superior fitment and sealing. This quality manufactured set includes the gasket for the perimeter of the heater core and two (2) round insulators.