Front Door Weatherstrips
p/n: 82-0137-72
This Front Door Weatherstrip pair is designed from the original part for superior fitment and seal. These primary door weatherstrips mount (pin-on) directly to the left and right front doors sealing the full perimeter of the doors against the vehicle body when the door is closed.
Rear Door weatherstrip
p/n: 82-0115-72
Door edge weatherstrip. This part is the primary door to body weatherstrip.
Rear Door weatherstrip
p/n: 82-0139-72
Door edge weatherstrip. This part is the primary door to body weatherstrip.
Rear Door weatherstrip
p/n: 82-0114-72
Door edge weatherstrip. This part is the primary door to body weatherstrip.
Rear Door Weatherstrips
p/n: 82-0117-72
This Rear Door Weatherstrip pair is designed from the original part for superior fitment and seal. These primary door weatherstrips mount (pin-on) directly to the left and right rear doors sealing the full perimeter of the doors against the vehicle body when the door is closed.
Rear Door Weatherstrips
p/n: 82-0138-72
This Rear Door Weatherstrip pair is designed from the original part for superior fitment and seal. These primary door weatherstrips mount (pin-on) directly to the left and right rear doors sealing the full perimeter of the doors against the vehicle body when the door is closed.
Rear Window Gasket Set
p/n: 70-3937-81
This two (2) piece Rear Window Gasket Set installs around the full perimeter of the split rear window glass and have the properly molded corners for a precise and like factory fit.
Windshield Gasket
p/n: 60-0410-50
This Windshield Gasket mounts around the full perimeter of the front glass and has vulcanized, or bonded, ends. It also has the slot to accommodate the top edge's decorative molding.
Tailgate Weatherstrips - Upper and Lower
p/n: 70-1794-72
This upper and lower Tailgate Weatherstrip pair is designed from the original part for superior fitment and seal. These weatherstrips work to provide a tight seal for the tailgate by protecting the body line gap between the tailgate and vehicle body.
Front Door Vent Window Weatherstrips
p/n: 38-0092-55
These Front Door Vent Window Weatherstrips are the main seals needed to replace the rubber on your vent windows. They are designed and molded from original parts for superior fitment and seal.
Front Door Weatherstrips
p/n: 70-0825-72
Door edge weatherstrip with molded ends. This part is the primary door to body weatherstrip. Includes six (6) clips for easy installation. Made of top quality rubber.
Hardtop Roof Rail Weatherstrips
p/n: 70-1681-68
This Hardtop Roof Rail Weatherstrip pair is made of ozone resistant EPDM sponge rubber with molded A-pillar ends and corners for a factory like fit. These high-quality weatherstrips fit on the roof of the vehicle and work to seal the side windows when the window is fully raised.
Rear Spring Bumper Service
p/n: 60-0425-32
Bumpers, rear springs to frame. Revulcanization service only.Length: 3.0 inches. Width: 2.5 inches.
Rear Window Gasket
p/n: 60-0388-81
This Rear Window Gasket is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the back glass and has vulcanized, or bonded, ends which means no cutting or splicing is required for installation.
Rear Window Gasket
p/n: 60-0215-81
This Rear Window Gasket is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the back glass and has vulcanized, or bonded, ends which means no cutting or splicing is required for installation.
Window Felt Outer Beltline Weatherstrips
p/n: 80-0873-57
Original equipment style side window outer horizontal seal (also known as beltline weatherstrip). These strips wipe the side windows when the glass is lowered.
Windshield Gasket
p/n: 60-0266-50
This Windshield Gasket is designed from the original part for superior fitment and seal. It has the slot to accommodate the outer edge's decorative molding.
Windshield Gasket
p/n: 70-1791-50
This Windshield Gasket is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the front glass and has vulcanized, or bonded, ends.
Windshield Gasket
p/n: 60-0386-50
This windshield gasket is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the front glass and has vulcanized, or bonded, ends which means no cutting or splicing is required for installation.
Windshield Gasket
p/n: 60-0222-50
This Windshield Gasket mounts around the full perimeter of the front glass and has vulcanized, or bonded, ends. It also has the slot to accommodate the outer edge's decorative molding.
Rear Window Gasket Set
p/n: 70-1262-81
This Rear Window Gasket Set contains the gaskets that mount around the two (2) back windows on the barn doors and the locking strips. They have vulcanized, or bonded, ends which means no cutting or splicing is required for installation.
Front Door Weatherstrips
p/n: 82-0116-72
This Front Door Weatherstrip pair is designed from the original part for superior fitment and seal. These primary door weatherstrips mount (pin-on) directly to the left and right front doors sealing the full perimeter of the doors against the vehicle body when the door is closed.
Front Door Weatherstrips
p/n: 82-0122-72
This Front Door Weatherstrip pair is designed from the original part for superior fitment and seal. These primary door weatherstrips mount (pin-on) directly to the left and right front doors sealing the full perimeter of the doors against the vehicle body when the door is closed.
Side Window Run Channel and Beltline Set
p/n: 70-4677-58
This six (6) piece Side Window Run Channel and Beltline Set includes the Left and Right side run channels and inner / outer window felt beltline weatherstrips for the rear door windows of the vehicle.
Window Felt Beltline Weatherstrips
p/n: 80-1067-57
This Window Felt Beltline Weatherstrip set with original type material installs on the left and right doors to wipe the side windows when the glass is lowered. These inner and outer side window strips come ready to install with pre-install metal clips for a factory like appearance.
Window Felt Outer Beltline Weatherstrips
p/n: 80-1090-57
This is a high-quality material style Window Felt Outer Beltline Weatherstrip pair. This ready to install four (4) piece set includes Only the Outer window felts (the part sealing the outside of the vehicle) for the front and rear door side windows.
Windshield Gasket
p/n: 70-2273-50
This windshield gasket mounts around the full perimeter of the front glass and has properly molded corners for a precise, factory fit.
Windshield Gasket - No Groove
p/n: 70-4303-52
This Windshield Gasket mounts around the full perimeter of the front glass and has properly molded corners for a precise, factory fit. This gasket has NO Trim Groove for decorative molding.
Window Felt Outer Beltline Weatherstrips
p/n: 80-0871-57
This is an Original material style Outer side window horizontal weatherstrip set (also known as beltline weatherstrip). This ready to install four (4) piece beltline set includes Only the Outer seals (the part sealing the outside of the vehicle) for door and quarter windows. For Convertibles with Special Molding exterior trim.
Front Door Weatherstrips
p/n: 82-0130-72
This Front Door Weatherstrip pair is designed from the original parts for superior fitment and seal. These primary front door weatherstrips install with pins to seal the driver and passenger doors when closed.
Rear Door weatherstrip
p/n: 82-0134-72
Door edge weatherstrip. This part is the primary door to body weatherstrip.
Rear Door Weatherstrip
p/n: 82-0133-72
Rear door edge weatherstrip. This part is the primary door to body weatherstrip.
Front Door Vent Window Weatherstrips
p/n: 38-0061-55
These Front Door Vent Window Weatherstrips are the main seals needed to replace the rubber on your vent windows. They are designed and molded from original parts for superior fitment and seal.
Vent Window Weatherstrips - Convertible
p/n: 70-3925-55
These Convertible Vent Window Weatherstrips are the main rubber seals needed to replace the rubber on your Corvette convertible vent windows. Made from top quality rubber to ensure durability and proper seal.
Windshield Gasket
p/n: 60-0083-50
This Windshield Gasket mounts around the full perimeter of the front glass and has the divider bar molded directly into it for a precise, factory fit.
Windshield Gasket
p/n: 60-0169-50
This Windshield Gasket mounts around the full perimeter of the front glass and has the divider bar molded directly into it for a precise, factory fit. It also has the slot to accommodate the outer edge's decorative molding.
Windshield Gasket
p/n: 60-0273-50
This Windshield Gasket is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the front glass and has vulcanized, or bonded, ends which means no cutting or splicing is required for installation.
Window Felt Beltline Weatherstrips
p/n: 80-0690-57
Original equipment style side window horizontal seal. These strips wipe the side windows when the glass is lowered. They come ready to install with finished ends.
Engine Mount Service – Revulcanization Only
p/n: 60-0676-11
This Revulcanization Service Only is to restore your supplied Rear Engine Mount to it's like new original condition. Service requires your metal core. Please call or email for more service details and ordering.
Taillight Gasket Set
p/n: 70-2410-15
This six (6) piece Taillight Gasket set is designed from the original part for superior fitment and seal. Fully molded gaskets for replacing the inboard body gasket, outboard body gasket, and a die-cut replacement for the outboard lens gasket.
Windshield Gasket
p/n: 70-1714-50
This Windshield Gasket is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the front glass and has vulcanized, or bonded, ends which means no cutting or splicing is required for installation.
Windshield Gasket
p/n: 60-0198-50
This Windshield Gasket mounts around the full perimeter of the front glass and has vulcanized, or bonded, ends which means no cutting or splicing is required for installation.
Windshield Gasket
p/n: 70-1715-50
This Windshield Gasket is designed from the original part for superior fitment and seal. The seal has the slot to accommodate the outer edge's decorative molding.
Tailgate Window Felt Weatherstrip
p/n: 80-0289-57
Tailgate window horizontal seal. These strips wipe the tailgate window when the glass is lowered. They come ready to install with finished ends and body curvature bends.
Windshield Gasket without Groove
p/n: 60-0289-50
This Windshield Gasket without Groove is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the front glass and has vulcanized, or bonded, ends which means no cutting or splicing is required for installation. For models with no reveal molding.
Tailgate Window Felt Beltline Weatherstrips
p/n: 80-0804-57
This Tailgate Glass Window Felt Beltline Weatherstrip reproduction pair is designed from the original part for superior fitment and seal. This window felt molding mounts to the tailgate with the included fasteners.
Vent Window Weatherstrip - Coupe
p/n: 70-3927-55
These Vent Window Weatherstrips are the main rubber seals needed to replace the rubber on your Corvette hardtop coupe's vent windows. Made from top quality rubber to ensure durability and proper seal.
Convertible Soft Top to Decklid Cover Weatherstrip
p/n: 70-4634-67
This Convertible Soft Top to Decklid Cover Weatherstrip is designed from the original part for superior fitment and seal. This part seals the convertible top deck lid to the body.
Front Door Weatherstrips
p/n: 70-2217-72
This Door Weatherstrip pair is designed from the original part for superior fitment and seal. Push-on type door weatherstrips mount directly to the body to seal against the full perimeter of the doors. This part is the primary door to body weatherstrip.
Quarter Window Weatherstrips
p/n: 27-0040-77
This Quarter Window Weatherstrips pair is designed from the original part for superior fitment and seal. This seal mounts around the full perimeter of the quarter glass for a precise, factory fit. For fixed, stationary windows only.