U Jamb Door Lock Pillar Fillers
p/n: 60-0571-79
This U Jamb Door Lock Pillar Filler pair is designed from the original part for superior fitment and sealing. This right and left weatherstrip filler mounts at the bottom of the rear side window, lower leading edge to seal the rear quarter window. Also known as a Door U Jamb Seal.
Window Felt Beltline Weatherstrips
p/n: 80-0055-57
This is an Original equipment style side window horizontal weatherstrip set (also known as beltline weatherstrip). This four (4) piece set includes inner and outer window felt beltline weatherstrips for each door side window.
Front Suspension Bumper
p/n: 60-0093-32
Bumper, front lower suspension arm. Attaches to front cross member by carrot retainer.Height: 2.0 inches.
Parking Brake Boot
p/n: 60-0145-24
This Parking Brake Boot is used for the brake lever at the floor. Designed from an original part and molded from EPDM dense rubber for durability and proper fit.
Run Channel Upper Bumper
p/n: 70-0779-62
This run channel upper bumper is manufactured as original with a brass metal core and molded for a precise, factory fit. The seal is installed at the top of the front door vent window frame on the division post.
Tailgate or Back Door Weatherstrip
p/n: 70-3604-84
This Tailgate or Back Door Weatherstrip is designed from the original part for superior fitment and seal. The seal mounts with properly spaced plastic clips around the full perimeter of the rear opening.
Body Bumper Kit
p/n: 90-0205-90
This fourteen (14) piece Body Bumper Kit is designed from the original part for superior fitment, finish and function. Designed from originals and made from top quality rubber to ensure durability.
Convertible Top Rear Bow Weatherstrip
p/n: 70-3257-64
This Convertible Top Rear Bow Weatherstrip is designed from the original part for superior fitment and seal. Reproduction EPDM rubber weatherstrip attaches to the convertible top frame and seals to the deck lid.
Front Door Lock Pillar Fillers
p/n: 70-0941-79
This Front Door Lock Pillar Filler pair seals the bottom of the rear side window and may also be known as a door jamb seal. Fully molded authentic rubber construction.
Rear Bumper To Body Filler
p/n: 60-0359-30
This dense rubber Rear Bumper To Body Filler is designed from the original part for a superior fitment. The part is approximately sixty-six (66) inches long and fits between the vehicle body and the rear bumper.
U Jamb Door Lock Pillar Fillers
p/n: 70-0844-79
This quarter to side window U Jamb Door Lock Pillar Filler pair is designed from the original part for superior fitment and sealing. This right and left weatherstrip filler mounts at the bottom of the rear side window, lower leading edge to seal the rear quarter window. Also known as a Door U Jamb Seal.
Overload Spring Arm Bumpers
p/n: 70-2301-32
A reproduction Overload Spring Arm Bumper pair manufactured to OEM specifications. Fully molded quality rubber bumpers that installs in the truck's overload spring arms.
Side Window Vertical Leading Edge
p/n: 60-0662-80
This quarter to side window Vertical Leading Edge Weatherstrip pair is designed from the original part for superior fitment and seal. This part attaches to the vertical edge of the rear side windows when the rear side windows are fully raised.
Hood to Cowl Weatherstrip
p/n: 70-4280-43
This Hood to Cowl Weatherstrip is designed from the original part for superior fitment and seal. An exact reproduction of the original profile. This seal mounts at the rear of the engine bay to seal between the hood and vehicle body cowl.
Door - Gravel Shield - Running Board Weatherstrip
p/n: 60-0054-73
This Door - Gravel Shield - Running Board Weatherstrip is a anti-squeak bulb type extrusion with fitment for General Motors vehicles. A twelve (12) foot strip made of high-quality EPDM dense rubber and designed from original parts for superior fitment, finish and function.
Door Auxiliary Weatherstrips
p/n: 60-0342-73
This six (6) piece Door Auxiliary Weatherstrip set is designed from the original part for superior fitment and seal. The Auxiliary Weatherstrip, also known as a "J" seal, installs on the door front at the beltline, right and left sides of the vehicle.
Front Fender Seals
p/n: 60-0522-45
Seal, front fender baffle, right and left. One (1) pair per car. Length: 5-1/4" inches.
Hatchback Weatherstrip
p/n: 82-0102-84
This Hatchback Weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the hatch opening directly to the body.
Outer Beltline Scraper Weatherstrips
p/n: 50-0455-61
This Outer Beltline Scraper Weatherstrip pair is fully molded with EPDM rubber over a corrosion resistant brass metal core. These window scrapers are for models with the chrome strip on the door.
Outer Beltline Weatherstrip
p/n: 50-0488-61
This Outer Beltline Weatherstrip is fully molded with EPDM rubber over a corrosion resistant brass metal core. These window scrapers are for models with the chrome strip on the door. Designed like original with attaching tabs.
Body Bumper Kit
p/n: 90-0216-90
This twelve (12) piece Body Bumper Kit is designed from the original part for superior fitment, finish and function. Designed from originals and made from top quality rubber to ensure durability.
Windshield Weatherstrip Set
p/n: 70-3915-50
This four (4) piece Windshield Weatherstrip Set works to install the Corvette windshield with a precise, like factory fit. Parts are designed from originals to fit correctly.
Front suspension bumper
p/n: 60-0677-32
Bumper, front suspension. Molded with side clearances as original.
Taillight / License Light Bracket Mounting Pad - LH
p/n: 70-1109-15
A reproduction Taillight / License Plate Light Stand Bracket To Body Mounting Pad. Left hand only was used originally.
Quarter Window Lock Pillar Fillers
p/n: 60-0602-79
This Quarter Window Lock Pillar Filler pair seals the bottom of the rear side window, and may also be known as a u-jamb or door jamb seal. Fully molded authentic rubber construction with brass metal core.
Tailgate Weatherstrip Filler
p/n: 70-2056-87
Filler, tailgate weatherstrip at beltline, on body. Fully molded with holes for attaching pins.Length: 4.0 inches.
Windshield Gasket
p/n: 70-2191-50
This Windshield Gasket mounts around the full perimeter of the front glass and has properly molded corners for a precise, factory fit.
Rear Cargo Right Door Weatherstrip
p/n: 70-4886-73
This Rear Cargo Door Weatherstrip is designed from the original part for superior fitment and function. This weatherstrip fits on the opening of the rear door on the passenger side of the van.
Side Window Beltline Weatherstrip
p/n: 70-0869-61
This Side Window Beltline Weatherstrip is fully molded with EPDM rubber over a corrosion resistant brass metal core. These window scrapers are for models with the chrome strip on the door. Designed like original with attaching tabs.
Coupe Hinge Pillar Weatherstrips
p/n: 70-3934-63
This Coupe Hinge Pillar Weatherstrip attaches to the body and seals between the A-pillar post and the front section of the door or vent window frame when the door is closed.
Hardtop Roof Rail Weatherstrips
p/n: 60-0525-68
This Hardtop Roof Rail Weatherstrip pair is made of ozone resistant EPDM sponge rubber. These high-quality weatherstrips fit on the roof of the vehicle and work to seal the side windows when the window is fully raised.
Rear Gravel Deflector to Bumper Seal
p/n: 60-0020-30
This Rear Gravel Deflector to Bumper Seal is made of a high quality EPDM dense rubber extrusion. Designed from the original part so it fits correctly. Sold as a six (6) foot strip.
Side window leading edge
p/n: 60-0656-80
Side window vertical leading edge weatherstrip. This part attaches to the vertical edge of the rear side windows when the rear side windows are fully raised. Molded authentic rubber construction with metal core, this part does not include the chrome piece
Window Pinchweld Seal
p/n: 70-0096-52
This twelve (12) foot Window Pinchweld Seal is designed from the original part for superior fitment and function. The part is used to seal and retain an outer decorative reveal molding. Used with our 70-1192-52.
Hood To Cowl Weatherstrips
p/n: 60-0428-42
This Hood To Cowl Weatherstrip pair is designed from original parts so it fits correctly. The pair comes ready to install with pre-punched holes.
T-Top Drip Edge Flap Seals - Plastic
p/n: 70-4331-68
This T-Top Outer Drip Edge Flap Seal pair is designed from the original part for superior fitment and seal. These plastic "flap seal" pieces install on the T-Top itself. Replacing these will aid in reducing wind noise and keep rain out of your T-Top roofed F-body.
T-Top Drip Edge Flap Seals - Rubber
p/n: 70-4707-68
This T-Top Outer Drip Edge Flap Seal pair is designed from the original part for superior fitment and seal. These rubber "flap seal" pieces install on the T-Top itself. Replacing these will aid in reducing wind noise and keep rain out of your T-Top roofed F-body.
Liftgate Weatherstrip
p/n: 70-3477-84
This Liftgate Weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the liftgate opening directly to the body.
Beltline Weatherstrip
p/n: 70-1120-61
This Beltline Weatherstrip comes in a six (6) foot length for the outer beltline (sometimes called "scraper seal"). For use on front, rear, and quarter windows without a chrome reveal molding at the window beltline. Available in 6ft lengths.
Window Felt Outer Beltline Weatherstrips
p/n: 80-0062-57
This is an Original material style outer side window horizontal weatherstrip set (also known as beltline weatherstrip). This ready to install two (2) piece beltline set includes only the outer seals (the part sealing the outside of the vehicle) for the side windows.
Parking Light Mounting Pad
p/n: 60-0204-17
Mounting pad, accessory. Fender parking light.Length: 10.25 inches.
Roof Headliner Retainer Strip
p/n: 60-0368-88
This Roof Headliner Retainer Strip is designed from the original part for an authentic fit, finish, and appearance. The retainer strips is used to hold the interior cardboard headliner in place. A twelve (12) foot strip.
License Plate Light Mounting Pads
p/n: 60-0174-17
This rear License Plate Light Mounting Pad pair is designed from the original part for superior fitment and function. This reproduction mounting pad fits between the rear License Plate Light Housing or Bezel and the vehicle body. Two (2) required per vehicle.
Window Felt Inner Beltline Weatherstrips
p/n: 80-0417-57
This is a high-quality material Window Felt Inner Beltline side window horizontal weatherstrip set (also known as beltline weatherstrip). This two (2) set includes only the inner seals (the part sealing the interior of the car) for the door side windows.
Rear Door Hinge Seals Set
p/n: 60-0285-69
This Rear Door Hinge Seals Set is designed from the original part for superior fitment and sealing. A four (4) piece set. Some vehicles require two (2) sets.
Side Window Vertical Leading Edge
p/n: 70-1271-80
This quarter to side window Vertical Leading Edge Weatherstrip pair is designed from the original part for superior fitment and seal. This part attaches to the vertical edge of the rear side windows when the rear side windows are fully raised.
Accelerator Pedal Service
p/n: 60-0701-40
Pedal, accelerator. Revulcanization service only. Excellent cover detailing with molded in rod ball socket as original.