Vent Window Division Bar Weatherstrips
p/n: 70-3632-56
This Front Vent Window Division Bar Weatherstrip pair is designed from the original part for superior fitment and seal. This part fits opposite the glass run channel and seals the vent window when the vent is closed.
Fuel Neck Grommet
p/n: 70-1616-39
Grommet, fuel neck. Fully molded rubber with retaining flange. Three and eleven sixteenths inch (3-11/16") outside diameter by two and one eighth inch (2-1/8") inside hole diameter by nine sixteenths inch (9/16") height.
Side Roof Rail Weatherstrip
p/n: 30-0177-65
Side Roof Rail Weatherstrip to fit at the bottom of roof rail over the side window. Made of high-quality EPDM rubber. Fits metal retainer.
Door End Cap Fillers
p/n: 70-4673-73
This Door End Cap Filler pair manufactured with soft, yet durable, closed-cell EPDM sponge rubber with galvanized steel cores. Designed from the original part for superior fitment, finish and function.
Fuel Neck Grommet
p/n: 40-0286-39
Grommet, fuel filler neck. Fully molded rubber. Three and one fourth inch (3-1/4") outside diameter by two and one half inch (2-1/2") inside diameter by five eighths inch (5/8") height. Also see our #40-0043-39 sold separately.
Trunk Bumper
p/n: 40-0082-85
Bumper, trunk lid, rubber. Retained by two (2) screws (not included).Width: 2.50 inches. Height: 1.625 inches.
Gearshift Boot
p/n: 40-0111-88
Boot, base of gearshift lever. Black rubber. For brown see our #40-0111-89. Made separately to fit most of our gearshift floorplates. Copied from original.
Fender Light Pad
p/n: 40-0423-17
Pad, front fender light. Un-beaded die cut mounting pad like original.Length: 11.75 inches.
License Light Mounting Pad
p/n: 40-0227-17
This License Light Mounting Pad is die cut from a dense rubber for a direct fit.
Starter pedal pad
p/n: 40-0200-21
Pad, starter pedal. Excellent quality with detail and workmanship as found in original.
Fuel Neck Grommet
p/n: 40-0352-39
Grommet, fuel filler neck, exact copy with thirty (30) degree slope. Fully molded rubber with retaining flange. Three and five sixteenths inch (3-5/16") outside width by four and one eight inch (4-1/8") outside length.
Taillight Mounting Pad
p/n: 40-0198-15
Pad, taillight mounting. Plain type, no bead. Length: 6.0625 inches. Width: 2.375 inches.
Side Mount Clamp Cushion
p/n: 40-0138-37
Cushion, sidemount clamp. Two and one eighth (2-1/8) inch by four and five eighths (4-5/8) inch.Length: 4.625 inches. Width: 2.125 inches.
Fuel Neck Grommet
p/n: 40-0139-39
Grommet, fuel filler neck. Fully molded rubber, slightly angled. Four and one half inch (4-1/2") outside width by four and five eighths inch (4-5/8") outside length by two and one fourth inch (2-1/4") inside hole diameter.
Taillight Mounting Pad
p/n: 40-0172-15
Pad, taillight bracket mounting. Right and left, plain pad without beading as original. Length: 5.3125 inches.
Hood to Cowl Weatherstrip
p/n: 70-2219-43
This Hood to Cowl Weatherstrip is designed from the original part for superior fitment and seal. This six (6) long original profile extrusion provides complete coverage.
U Jamb lock pillar filler
p/n: 82-0195-79
Door lock pillar seal. This part seals the bottom of the rear side window, and may also be known as a door jamb seal.
Beltline Weatherstrips
p/n: 40-0539-57
This Beltline Weatherstrip pair installs on the left and right doors to wipe the inside and outside of the windows when the glass is lowered. Flexible, pile lined, rubber covered, with a black bead. Available in 3ft pair.
Brake and Clutch Shank Seal
p/n: 40-0217-24
Draft cap for brake and clutch pedal.Length: 2.4375 inches. Width: 1.6875 inches.
Fuel Neck Grommet
p/n: 70-2203-39
Grommet, fuel filler neck. Fully molded with all original details. Three and one eighths inch (3-1/8") outside diameter by one and seven eighths (1-7/8") inside hole diameter by three fourths inch (3/4") inch height.
Trunk Hinge Mounting Pad
p/n: 40-0134-85
Pads, trunk hinge mounting. Three and one half (3-1/2) inch and five (5) inch long sections. Sold as four (4) piece set for two (2) hinges.
Taillight Gasket
p/n: 70-2299-15
Gasket, tail light housing to body. Proper thickness sponge rubber cut to precise original configuration.
Flexible Run Channel - 6 Ft.
p/n: 70-1108-57
Channel, flexible window run, un-beaded. Cloth covered mohair-lined type. Available in 6ft lengths.
Hardtop to Body Header Weatherstrip
p/n: 70-4891-68
This removable Hardtop to Body Header Weatherstrip is designed from the original part for superior fitment and sealing. Weatherstrip mounts on the top of the body and seals against the front of the shell with weatherstrip adhesive glue (not included).
Side Mount Grommet
p/n: 40-0269-37
Grommet, spare wheel sidemount main support tube. Covers hole in fender, one per vehicle.Length: 4.875 inches.
Steering Column Grommet
p/n: 40-0078-36
Grommet, steering column to toe board. Black rubber. For brown see our #40-0078-89.Length: 5.375 inches.
Fuel Neck Grommet
p/n: 40-0067-39
Grommet, fuel filler neck. Oblong, fully molded rubber. Four and one eighth inch (4-1/8") outside length by two and one fourth inch (2-1/4") inside diameter.
Hood Bumper
p/n: 40-0354-42
Bumper, fender to hood. Two (2) per car. Held by four (4) rivets.Length: 2.9375 inches.
Headlight Mounting Pad
p/n: 40-0277-14
Pad, headlight bracket to radiator shell or side of shroud. (There are several types of these pads used in 1937).
Firewall Pass Through Grommet
p/n: 40-0522-21
This Firewall Pass Through Grommet is the rectangular large type. Designed from the original part for superior fit and seal.
Hood to Cowl Weatherstrip
p/n: 70-2388-43
This Hood to Cowl Weatherstrip is designed from the original part for superior fitment and seal. Proper rubber cross section extrusion with pre-installed attaching clips.
Hood to Cowl Weatherstrip
p/n: 70-2389-43
This Hood to Cowl Weatherstrip is designed from the original part for superior fitment and seal. This weatherstrip mounts at the rear of the engine bay directly to the body. Proper rubber cross section with pre-inserted attaching clips.
Window Locking Strip - Chrome
p/n: 70-2196-52
This Chrome Locking Strip is used to retain windshield gaskets in pickups and vans. Designed from the original part for superior fitment, finish and function. Available in 16ft. lengths.
Peel-N-Stick Trunk Weatherstrip
p/n: 70-1438-WT
This Peel-N-Stick Trunk Weatherstrip is designed for superior fitment and seal. The weatherstrip mounts around the full perimeter of the trunk decklid to seal directly to the body. Easy to install 3M Peel-N-Stick backing provides superior adhesion for reliable performance.
Peel-N-Stick Trunk Weatherstrip
p/n: 70-3050-WT
This Peel-N-Stick Trunk Weatherstrip is designed for superior fitment and seal. The weatherstrip mounts around the full perimeter of the trunk decklid to seal directly to the body. Easy to install 3M Peel-N-Stick backing provides superior adhesion for reliable performance.
Hood to Radiator Weatherstrip
p/n: 70-1580-42
Weatherstrip, hood to radiator shroud.Width: 1.3125 inches.
Steering Column Grommet
p/n: 40-0144-36
Grommet, steering column to toe board. Black rubber. For brown see our #40-0144-89. Two and three fourths (2-3/4) inch by seven and one half (7-1/2) inch.
Accelerator Pedal Pad
p/n: 40-0113-40
Pad, accelerator pedal. Black rubber. Slipover type. Exact pattern, perfect copy in all details.
License Plate Mounting Pad
p/n: 40-0119-44
Pad, license plate bracket to body, plain type as original.Length: 5.0625 inches. Width: 4.875 inches.
Cowl Vent Gasket
p/n: 40-0271-54
Gasket, cowl vent. Fully molded to original cross-section and outline.Length: 18.0 inches.
Cowl Vent Gasket
p/n: 40-0225-54
This Cowl Vent Gasket is designed from the original part for superior fitment and seal. Installs for a like factory fit and finish.
Fuel Neck Grommet
p/n: 40-0043-39
Grommet, fuel filler neck. Fully molded rubber with retaining flange. Three and five eighths inch (3-5/8") outside diameter by two and one eighth inch (2-1/8") inside diameter by one inch (1") height.
Hood Corner Pads
p/n: 40-0187-42
This Hood Corner Pad pair is an exact copy of the original. This pad fits between the engine hood and the body to isolate noise and vibration.
Hood Bumper
p/n: 40-0164-42
Pad, hood panel center bracket. Hollow, to fit over original steel bracket.Length: 1.375 inches. Width: 1.375 inches.
Fuel Neck Grommet
p/n: 40-0272-39
Grommet, fuel filler neck. Oblong shape, fully molded rubber. Four and one fourth inch (4-1/4") outside width by five and five eighths inch (5-5/8") outside length by seven eighths (7/8") height.
Cowl Vent Gaskets
p/n: 40-0170-54
This Cowl Vent Gasket is manufactured from high quality EPDM sponge rubber. For twin cowl vents of thirty four (34") inch circumference.
Fuel Filler Neck Grommet
p/n: 70-2581-39
This Fuel Filler Neck Grommet is designed from the original part for superior fitment and seal. This grommet fits around the vehicles fuel filler neck between the filler neck and vehicle body.
Window Felt Beltline Weatherstrips
p/n: 81-0029-57
This is a high quality Window Felt Beltine side window horizontal weatherstrip set (also known as beltline weatherstrip). This four (4) piece set includes inner and outer window felt beltline weatherstrips for each door / side window.
Brown Gearshift Boot
p/n: 40-0111-89
Boot, base of gearshift lever. Brown rubber. For black see our #40-0111-88. Made separately to fit most of our gearshift floorplates. Copied from original.
Door - Gravel Shield - Running Board Weatherstrip
p/n: 60-0054-73
This Door - Gravel Shield - Running Board Weatherstrip is a anti-squeak bulb type extrusion with fitment for General Motors vehicles. A twelve (12) foot strip made of high-quality EPDM dense rubber and designed from original parts for superior fitment, finish and function.
Run Channel Upper Bumper
p/n: 70-3426-62
Bumper, upper division post. Installs on the front door upper vent wing frame.
Door Weatherstrip End Cap
p/n: 82-0183-73
Weatherstrip, door seal end cap or filler. Fully molded. Order #82-0184-72 for perimeter weatherstrip separately.Width: 3.75 inches.
Hood to Cowl Weatherstrip
p/n: 70-2341-42
This Hood to Cowl Weatherstrip is designed from the original part for superior fitment and seal. A proper extrusion approximately sixty-two (62) inches long with pre-installed fastener clips.
Side Window Vertical Leading Edge
p/n: 82-0197-80
This quarter to side window Vertical Leading Edge Weatherstrip pair is designed from the original part for superior fitment and seal. This part attaches to the vertical edge of the rear side windows when the rear side windows are fully raised.
Fuel Neck Grommet
p/n: 40-0091-39
Grommet, fuel filler neck. Fully molded large oval style. Bottom is flat. Four and one half inch (4-1/2") outside width by five by one half inch (5-1/2") outside length. Two and five sixteenths inch (2-5/16") inside hole diameter.
1967-1968 Dodge Truck Factory Shop Manual, CD
p/n: 07-1175-07
This MOPAR-Licensed Detroit Iron CD contains the most comprehensive set of digital OEM shop manuals. The factory manuals on this CD were professionally scanned from the original service and parts manuals.
1964 Dodge Truck Factory Shop Manual, CD
p/n: 07-1172-07
This MOPAR-Licensed Detroit Iron CD contains the most comprehensive set of digital OEM shop manuals. The factory manuals on this CD were professionally scanned from the original service and parts manuals.
1969-1970 Dodge Truck Factory Shop Manual, CD
p/n: 07-1176-07
This MOPAR-Licensed Detroit Iron CD contains the most comprehensive set of digital OEM shop manuals. The factory manuals on this CD were professionally scanned from the original service and parts manuals.
1966 Dodge Truck Factory Shop Manual, CD
p/n: 07-1174-07
This MOPAR-Licensed Detroit Iron CD contains the most comprehensive set of digital OEM shop manuals. The factory manuals on this CD were professionally scanned from the original service and parts manuals.
1965 Dodge Truck Factory Shop Manual, CD
p/n: 07-1173-07
This MOPAR-Licensed Detroit Iron CD contains the most comprehensive set of digital OEM shop manuals. The factory manuals on this CD were professionally scanned from the original service and parts manuals.
Door End Cap Fillers
p/n: 82-0208-73
This Door End Cap Filler pair is designed from the original part for superior fitment and sealing. Fully molded with metal core just like original.
Gearshift Boot
p/n: 70-4817-26
This Gearshift Boot is designed from the original part for superior fitment and function. This boot fits over the gearshift tower to make a weathertight connection for the transmission gearshift rod as it passes up through the vehicle floorboard.
Decklid Lock Bumper
p/n: 40-0361-85
This Decklid Lock Bumper is fully molded and designed from the original part for superior fitment and seal. This bumper is made from high-quality EPDM dense rubber to provide excellent durability.
Brown Steering Column Grommet
p/n: 40-0078-89
Grommet, steering column to toe board. Brown rubber. For black see our #40-0078-36.Color:brown Length: 5.375 inches.
Door End Cap Filler
p/n: 70-1620-73
This Door End Cap Filler pair is designed from the original part for superior fitment and seal. Pre-drilled holes for easy installation. These premium seals have a corrosion resistant brass metal core.
Taillight Lens Gasket
p/n: 70-3524-15
Gasket, taillight lens. Fully molded rubber. Includes both right and left sides.
Hood Corner Pad
p/n: 40-0128-42
Pads, hood corners. Square type, brass core. Integral installation tabs. 90 degree angle, used on front or rear corners, as required.
Rear Window Gasket
p/n: 70-0084-77
This Rear Window Gasket comes in a seven foot, six inch (7' 6") strip and mounts around the full perimeter of the back glass. The ends may require trimming and bonding for installation.
Parking lamp lens gasket
p/n: 70-3526-16
Gasket, front parking and directional lamp. Fully molded rubber. Includes both right and left sides.
Brake and Clutch Pedal Pads - Black
p/n: 40-0121-22
This reproduction Clutch and Brake Pedal Pad pair slips over the full perimeter of the brake pedal for a precise, factory fit. An oval style perfect reproduction to replace worn original pedal pads. Manufactured in Black rubber. For Brown see our 40-0121-89.
Convertible Top Front Bow Weatherstrip
p/n: 30-0503-65
This Convertible Top Front Bow Weatherstrip is designed from the original part for superior fitment and seal. This seal installs directly to the convertible top to seal between the soft top and the top of the windshield.
Door Bottom Weatherstrips
p/n: 40-0537-73
This Door Bottom Weatherstrip pair is designed from the original part for superior fitment and seal. Held to door by steel strip. Sponge type rubber as original. For two (2) door models.
Control Arm Bumper
p/n: 40-0465-32
Bumper, upper control arm. One (1) pair per car.Height: 1.375 inches.
Tailgate Lower Weatherstrip
p/n: 70-4818-85
This Tailgate Lower Weatherstrip reproduction is designed from the original part for superior fitment and seal. This weatherstrip installs on the tailgate and is made from high-quality, ozone-resistant EPDM rubber.
Steering Column Grommet
p/n: 40-0421-36
Grommet, steering column and transmission shift rod through firewall.Length: 4.375 inches.
Window Felt Beltline Weatherstrips
p/n: 80-0567-57
This is an Original equipment style side window horizontal weatherstrip set (also known as beltline weatherstrip). This four (4) piece set includes inner and outer window felt beltline weatherstrips for each front door window.
Hood Corner Pad
p/n: 40-0127-42
Pads, hood corners, brass core. Approximately 80 degree angle. Integral tabs for installing.Length: 1.50 inches.
Door Bumper
p/n: 40-0262-70
Bumper, door.Chrysler 1934 Bumper, door. Chrysler 1932-34 Bumper, decklid. Two (2) required per car. Length: 2.50 inches. Width: 1.8125 inches.
Engine Mount Pad
p/n: 70-2577-11
This Engine Mount Pad pair is used as a lower support cushion. Correct design and rubber compound. Sold as a pair.
Fender Skirt Edge Weatherstrip
p/n: 40-0279-44
This Fender Skirt Edge Weatherstrip pair is designed from the original part for superior fitment, finish, and seal. This weatherstrips fits between the rear wheel fender skirt and the rear fender quarter panel.
Access Hole Plug
p/n: 10-0010-44
Cover, rear apron over fuel tank. 3-1/2 inch diameter hollow cup to cover hole above fuel gauge sending unit.
Swing-Out Windshield Weatherstrip
p/n: 40-0018-52
This Swing-Out Windshield Weatherstrip comes in an eleven (11) foot strip. The seal slides into the track (channel) attached to the glass that goes all the way around the windshield and creates a seal when the glass is pressed against the body of the vehicle.
Windshield Division Bar Gasket
p/n: 40-0157-52
Gasket, windshield division bar.Length: 14.0 inches. Width: 1.0 inches.
Vent division bar weatherstrip
p/n: 70-2135-56
Front vent window division post seal. Fully molded with metal core.
Vent Window Division Post Seals
p/n: 70-4333-56
This Front Vent Window Division Post Seal pair is designed from the original part for superior fitment and seal. Parts are fully molded EPDM rubber over a brass metal core.
U Jamb lock pillar filler
p/n: 70-1450-79
Door lock pillar seal. This part seals the bottom of the rear side window, and may also be known as a door jamb seal.
Brown Accelerator Pedal Pad
p/n: 40-0113-89
Pad, accelerator pedal. Brown rubber. For black see our #40-0113-40. Slipover type. Exact pattern, perfect copy in all details.
Brake and Clutch Pedal Pads
p/n: 40-0213-22
Pad, brake and clutch pedals. Horizontal oval style, slip over type.Length: 3.8125 inches. Width: 2.375 inches.
Clutch and Brake Pedal Pads - Black
p/n: 40-0107-22
This reproduction Clutch and Brake Pedal Pad pair slips over the full perimeter of the brake pedal for a precise, factory fit. An oval style perfect reproduction to replace worn original pedal pads. Manufactured in Black rubber.
Parking light lens gaskets
p/n: 70-3527-16
Gaskets, parking light lens. Set of four (4) molded rubber diamond seals. Located above each headlight for R & L sides. The set of four (4) is all that is required per car.
Rear Bumper Grommet
p/n: 70-2231-29
Grommets, rear support arm. Fully molded with all original details.