Fender Welting with 3/16 Bead - 25ft
p/n: 70-1099-44
A superior quality Fender Welting material constructed of reinforced black vinyl over a vinyl core. Typically used for attaching two (2) fenders to body. Sold in a 25 foot roll.
Fender Welting with 3/16" Bead - 50ft
p/n: 70-1100-44
A superior quality Fender Welting material constructed of reinforced black vinyl over a vinyl core. Typically used for attaching four (4) fenders to body. Sold in a 50 foot roll.
Firewall Pass Through Grommet
p/n: 40-0393-21
This Firewall Pass Through Grommet is designed from the original part for superior fit and seal. Similar to our 40-0523-21 but with a different hole patter.
Firewall Pass Through Grommet
p/n: 40-0394-21
This Firewall Pass Through Grommet is designed from the original part as a three (3) hole for the oil, temperature, and coil wires.
Front Spring Bumper
p/n: 40-0349-32
This Front Spring Bumper pair is designed from the original part for superior fitment and function. This is the front spring to frame bumper and also known as front axle bumper.
Fuel Neck Grommet
p/n: 40-0067-39
Grommet, fuel filler neck. Oblong, fully molded rubber. Four and one eighth inch (4-1/8") outside length by two and one fourth inch (2-1/4") inside diameter.
Gearshift Boot
p/n: 40-0076-88
Dust boot, gearshift, beehive type. Excellent copy and material. Used on some shift ball sockets.Length: 4.75 inches.
Gearshift Grommet
p/n: 40-0075-88
Grommet, gearshift lever, small type. Five eighths (5/8) inch inside diameter.
Harmonic balancer service
p/n: 40-0372-12
Vibration Damper (crankshaft impulse neutralizer assembly). Revulcanization service only.
Headlight Grommet
p/n: 40-0008-14
Grommets, headlight bar to shell. Slightly oval. One and one fourth (1-1/4) inch diameter hole.
Headlight Mounting Pad
p/n: 40-0059-14
Pad, headlight bar to fender mounting. Four and three fourths (4-3/4) inch by one and one fourth (1-1/4) inch.Length: 4.75 inches. Width: 1.25 inches.
Hood Bumper
p/n: 40-0354-42
Bumper, fender to hood. Two (2) per car. Held by four (4) rivets.Length: 2.9375 inches.
Hood Corner Pad
p/n: 40-0089-42
Pads, hood front corners. Rubber with metal core as original.Length: 1.4375 inches.
Hood Corner Pad
p/n: 40-0090-42
Pads, hood rear corners. Open angle for long hood. Metal core as original.Length: 1.50 inches.
Hood Corner Pad
p/n: 40-0128-42
Pads, hood corners. Square type, brass core. Integral installation tabs. 90 degree angle, used on front or rear corners, as required.
Horn trumpet grommet
p/n: 40-0086-21
Grommet for trumpet horn wire through motor cover. Close reproduction. Two (2) per car.
Rear Spring Thrust Washer
p/n: 40-0526-32
Thrust washer, rear spring. "Silent Block". Three sixteenths (3/16) inch thick. Seven eighths (7/8) inch by one and five eighths (1-5/8).
Rear Spring Thrust Washer
p/n: 40-0525-32
Thrust washer, rear spring. "Silent Block". Three sixteenths (3/16) inch thick. One (1) inch by one and three fourths (1-3/4) inch.
Rear Window Gasket
p/n: 70-0084-77
This Rear Window Gasket comes in a seven foot, six inch (7' 6") strip and mounts around the full perimeter of the back glass. The ends may require trimming and bonding for installation.
Rumble Seat Step Pad
p/n: 40-0012-44
Pad, rumble seat step bears Chrysler medallion logo in center.Height: .50 inches.
Shock absorber arm seal
p/n: 40-0081-32
Dust seal set, shock absorber link, rubber only. Eight (8) piece set.
Shock or Stabilizer Link Cross Pin Bushing
p/n: 50-0220-32
This Shock or Stabilizer Link Cross Pin Bushing is designed from the original part for superior fitment and function. A rubber bushing for shock absorber link cross pin or stabilizer cross link pin.
Side Mount Cover Pad
p/n: 40-0314-37
Anti-rattle, spare wheel cover in fenderwell.Width: .25 inches.
Side Mount Grommet
p/n: 40-0005-37
Grommets, sidemount support arm on fender. Two and one half (2-1/2) inch inside diameter by four and seven eighths (4-7/8) inch outside diameter.
Side Roof Rail Weatherstrip
p/n: 40-0095-65
Weatherstrip, convertible top to side windows. Fifteen sixteenths (15/16) inch by five eighths (5/8) inch. Sold in twelve (12) foot strips only.
Starter Pedal Pad
p/n: 40-0094-21
Pad, starter pedal, snap over cover with tread pattern matching other pedals.Length: 2.25 inches.
Starter pedal pad
p/n: 40-0158-21
Pad, starter pedal. Rectangular outline, curved as original to fit oval steel pedal core, proper tread pattern to match other pedals.
Steering Column Grommet
p/n: 70-1512-36
Insulator, steering column bracket. Two (2) pieces of extruded rubber like original.Width: 1.3125 inches.
Steering Column Grommet
p/n: 40-0006-36
Grommet, steering column at floor. For one and three fourths (1-3/4) inch diameter tube.Length: 5.75 inches.
Taillight Mounting Pad
p/n: 40-0061-15
Pad, taillight mounting. Chrysler 1932-33 Pad, taillight mounting. Chrysler and other WPC cars. Chrysler 1932-33 Pad, rumble seat step mounting.
Transmission Handbrake Damper Service
p/n: 40-0351-12
Plate assembly transmission damper, brake drum, parking or hand. Revulcanization service only.
Vacuum Clutch Cylinder Boot
p/n: 40-0084-24
Boot, automatic clutch vacuum cylinder rod.Length: 4.0 inches.
Windshield Gasket
p/n: 40-0320-52
This Windshield Gasket comes in a four (4) foot strip and is for the lower glass frame to cowl. This weatherstrip is for 2 piece windshields.
Windshield Weatherstrip Channel
p/n: 17-0032-52
This Windshield Weatherstrip Channel seals the windshield glass to body and protects interior of vehicle. Made from original parts to ensure great fit and easy installation.