Cowl Vent Gaskets
p/n: 40-0170-54
This Cowl Vent Gasket is manufactured from high quality EPDM sponge rubber. For twin cowl vents of thirty four (34") inch circumference.
Hood Corner Pad
p/n: 40-0090-42
Pads, hood rear corners. Open angle for long hood. Metal core as original.Length: 1.50 inches.
Engine Support Tube Plug
p/n: 40-0004-44
This Rear Engine Support Tube Plug pair is designed from an original part for a perfect it.
Rear Window Gasket
p/n: 70-0084-77
This Rear Window Gasket comes in a seven foot, six inch (7' 6") strip and mounts around the full perimeter of the back glass. The ends may require trimming and bonding for installation.
Windshield Gasket
p/n: 40-0320-52
This Windshield Gasket comes in a four (4) foot strip and is for the lower glass frame to cowl. This weatherstrip is for 2 piece windshields.
Hood Corner Pad
p/n: 40-0128-42
Pads, hood corners. Square type, brass core. Integral installation tabs. 90 degree angle, used on front or rear corners, as required.
Windshield filler
p/n: 40-0318-52
Seal, windshield outer trim. Four (4) piece set for top and bottom of division post trim and for right and left lower corners of windshield panels.
Steering Column Grommet
p/n: 40-0006-36
Grommet, steering column at floor. For one and three fourths (1-3/4) inch diameter tube.Length: 5.75 inches.
Carpet Heel Plate
p/n: 40-0087-88
Heel pad for carpet. Identical to original. Five and three fourths (5-3/4) inch by ten and one half (10-1/2) inch, to be stitched in place.Length: 10.
Steering Column Grommet
p/n: 70-1512-36
Insulator, steering column bracket. Two (2) pieces of extruded rubber like original.Width: 1.3125 inches.
Hood Corner Pad
p/n: 40-0089-42
Pads, hood front corners. Rubber with metal core as original.Length: 1.4375 inches.
Fender Welting 1/4" Bead - 50ft
p/n: 70-1098-44
Welting, fender. Superior quality, proper construction of reinforced black vinyl over vinyl core, one and three eighths (1-3/8) inch wide. One fourth (1/4) inch bead, fifty (50) foot roll. Typically used to attach four (4) fenders to body.
Chrome Fender Welting - 50ft
p/n: 70-1102-44
Welting, fender, bright chrome vinyl, three sixteenths (3/16) inch bead, one and one half (1-1/2) inch width. Superior quality. Fifty (50) foot roll. Typically used to attach four (4) fenders to body. For twenty five (25) foot roll see #70-1101-44.
Fender Welting with 3/16" Bead - 50ft
p/n: 70-1100-44
A superior quality Fender Welting material constructed of reinforced black vinyl over a vinyl core. Typically used for attaching four (4) fenders to body. Sold in a 50 foot roll.
Brake and Clutch Pedal Pads
p/n: 40-0072-22
Pad, brake and clutch pedal.Length: 3.9375 inches. Width: 2.9375 inches.
Starter pedal pad
p/n: 40-0158-21
Pad, starter pedal. Rectangular outline, curved as original to fit oval steel pedal core, proper tread pattern to match other pedals.
Rumble Seat Step Pad
p/n: 40-0012-44
Pad, rumble seat step bears Chrysler medallion logo in center.Height: .50 inches.
Headlight Grommet
p/n: 40-0008-14
Grommets, headlight bar to shell. Slightly oval. One and one fourth (1-1/4) inch diameter hole.
Shock absorber arm seal
p/n: 40-0081-32
Dust seal set, shock absorber link, rubber only. Eight (8) piece set.
Exhaust System Hanger - Revulcanization Only
p/n: 40-0350-13
This Revulcanization Service Only is designed to restore your Exhaust System Hanger to a like new original condition. Service requires your metal core. Please call or email for more service details and ordering.
Fender to Radiator Seal
p/n: 40-0085-44
This Fender to Radiator Seal is molded out of EPDM rubber Overall length is 11.25 inches.
Windshield Filler
p/n: 40-0266-52
Bumpers, windshield frame to pillar. Closed bodies with split windshield. 2 rights and 2 lefts required per car. Four (4) piece set.Length: 2.25 inches.
Side Mount Grommet
p/n: 40-0005-37
Grommets, sidemount support arm on fender. Two and one half (2-1/2) inch inside diameter by four and seven eighths (4-7/8) inch outside diameter.