Hood to Cowl Weatherstrip
p/n: 20-0215-43
This Hood to Cowl Weatherstrip is designed from the original part for superior fitment and seal. An exact reproduction using the correct profile dense rubber extrusion.
Hood to Cowl Weatherstrip
p/n: 20-0216-43
This Hood to Cowl Weatherstrip is designed from the original part for superior fitment and seal. An exact reproduction of the original Ford part using dense rubber with pre-installed fastener clips.
Retractable Front Roof Weatherstrip
p/n: 20-1935-67
Weatherstripping, front roof rear. Has special molded ends.
Fastback Rear Window Louver Gaskets
p/n: 20-2857-83
A six (6) piece Fastback Rear Window Louver Gasket set designed from the original part for superior fitment and function. These gaskets or pads serve to protect the paint when installing the rear window louvers.
Headliner Seal
p/n: 20-0573-88
Headliner Seal - One hundred seventy six (176) inches long to hold Headliner - Goes Around The Interior Perimeter Of Cab.
Convertible A-Pillar Post Weatherstrips
p/n: 20-1912-63
This Convertible A-Pillar Post Weatherstrip pair is designed from the original part for superior fitment and sealing.. These windshield post weatherstrips attach to the body to seal between the A-pillar post and the front section of the door or vent window frame when the door is closed.
Division Bar Glass Run Channel
p/n: 20-0107-58
This Division Bar Glass Run Channel piece is designed from the original part for superior fitment and function. This rigid run channel fits between the front of the door glass and the back of the vent window. Requires one piece per door, two per vehicle.
Vent division bar weatherstrip
p/n: 20-0106-56
Front vent window division post seal. Fully molded with metal core and attaching tabs.
Vent division bar weatherstrip
p/n: 20-0021-56
Front vent window division post seal. Fully molded with metal core and attaching tabs.
Door Glass Rigid Run Channel
p/n: 20-0022-58
A Lower Door Glass Rigid Run Channel designed from the original part for superior fitment and function. Installs on the lock side of the door glass frame at the rear of the front door.
Fuel Tank Filler Hose - Rear Tank
p/n: 70-5011-41
This Fuel Tank Filler Neck Hose is designed from the original part for superior fitment and function. This fuel resistant rubber hose set connects the rear fuel tank to the filler pipe on Styleside models.
Hood Bumper Set
p/n: 20-3004-42
This ten (10) piece Hood Bumper set is designed from the original parts for superior fitment and function.
Roof Rail Corner Seals
p/n: 20-3089-62
This Roof Rail Corner Seal pair is designed from the original part for superior fitment and seal. This roof side rail front corner seal installs (glues) onto the body.
Vent division bar weatherstrip
p/n: 20-3042-56
Front vent window division post seal. Fully molded with metal core and attaching tabs.
Vent division bar weatherstrip
p/n: 20-3040-56
Front vent window division post seal. Fully molded with metal core and attaching tabs.
Vent Window Post Back Edge Weatherstrips
p/n: 20-3041-56
This Vent Window Post Back Edge Weatherstrips pair is designed from the original part for superior fitment and seal. These pieces mount on the vertical division bar with rivets and seal as the vent glass closes against them.
Vent Division Bar Weatherstrips
p/n: 20-3043-56
This Front Vent Division Bar Weatherstrip is fully molded with metal core and attaching tabs.
Splash Apron
p/n: 20-3014-44
This six (6) piece Splash Apron set is designed from the original part for superior fitment and seal. Installs on the fender splash apron.
Roof Side Rail Weatherstrip
p/n: 20-3090-62
Seals, roof side rail center. Installs on roof rail where quarter window rolls up to back of front door glass.
Splash Apron
p/n: 20-3015-44
This six (6) piece Splash Apron set is designed from the original part for superior fitment and seal. Includes fender splash apron and bottom of radiator side deflectors.
Hood Bumper Set
p/n: 20-3003-42
This ten (10) piece Hood Bumper set is designed from the original parts for superior fitment and function.
Splash Apron
p/n: 20-3016-44
This six (6) piece Splash Apron set is designed from the original part for superior fitment and seal. Installs on fender splash apron and bottom of radiator side deflectors.
Spring Shackle Bushing Set
p/n: 20-0035-33
This Spring Shackle Bushing Set is an original style rubber leaf spring bushing used on the front of rear spring. One (1) set is required per spring.
Taillight Mounting Pad
p/n: 20-1793-15
Kit, taillight mounting pad. Fin and Oval type. Six (6) piece set.
Taillight Mounting Pad
p/n: 20-1795-15
Kit, taillight mounting pad. Fin and oval type. Six (6) piece set.
Front Fender to Apron Seal
p/n: 20-2504-45
This Front Fender to Apron Seal installs on the fender to inner apron. Excellent for when assembling front sheet metal. Sold as a fifteen (15) foot roll.
Taillight Mounting Pad
p/n: 20-1794-15
Kit, taillight mounting pad. Fin and oval type. Six (6) piece set.
Fender Skirt Edge Weatherstrip
p/n: 20-1316-44
This Fender Skirt Edge Weatherstrip pair is designed from original for superior fitment, finish, and seal. This weatherstrips fits between the rear wheel fender skirt and the rear fender quarter panel.
Splash Apron
p/n: 20-1867-45
This four (4) piece Splash Apron pair is designed from the original part for superior fitment and seal. Installs on the fender splash apron.
Stationary Window Gasket
p/n: 70-4743-77
This Stationary Window Gasket is designed from the original part for superior fitment and seal. This window channel seal fits between the side or rear stationary window glass and door body.
Upper Door - Roof Rail Weatherstrips
p/n: 70-2436-73
This Upper Door - Roof Rail Weatherstrip pair is made of high-quality EPDM rubber with vulcanized corners for a factory like fit. These upper, left and right door weatherstrips seal the door window frame to the hardtop and to the windshield frame.
Rear Window Gasket
p/n: 20-0419-81
This Rear Window Gasket is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the back glass and has vulcanized, or bonded, ends which means no cutting or splicing is required for installation.
Window Felt Outer Beltline Weatherstrip
p/n: 80-1078-57
This is a single, individual high-quality material style Window Felt Outer Beltline Weatherstrip. This ready to install one (1) piece Outer Only window felt (the part sealing the outside of the vehicle) is for the Left or Right Rear Door side windows. Order two (2) per vehicle as needed.
Convertible Top Rear Rail Water Deflector
p/n: 20-0028-67
This Convertible Top Rear Rail Water Deflector pair is designed from the original part for superior fitment and seal. For soft folding tops the deflector pair is included in Convertible Roof Rail Weatherstrip sets 20-0027-65 and 20-0139-65.
Right Engine Mount
p/n: 20-0058-11
This Front Right Engine Mount is designed from original part for correct fitment and function. Rubber coated over a metal core for durability and proper engine vibration isolation.
Left Engine Mount
p/n: 20-0057-11
This Front Left Engine Mount is designed from original part for correct fitment and function. Rubber coated over a metal core for durability and proper engine vibration isolation.
Flexible Run Channel - 30 Inch Pair
p/n: 40-0309-57
Channel, side window glass, vertical run. Flexible, felt lined, rubber covered channel. Available in 30" pair.
Upper Door Glass Bumpers
p/n: 20-1343-62
This Upper Door Glass Bumper pair is designed from the original part for authentic fitment and function. This upper bumper fits at the door window post.
Fender Welting
p/n: 20-1590-44
This black Fender Welting is designed from the original part for superior fitment and seal. This welting material fits between the fenders and the vehicle body. Thirty (30) foot roll.
Back Of Door To Window Seals
p/n: 20-2837-79
This Back of Door to Window Seal pair is for the bottom of the rear side window. This seal pair fits Early 1967 models built before 12/14/1966. Fully molded authentic rubber construction with metal core. Comes with hardware for easy installation.
T-Top Beaded Felt Weatherstrip
p/n: 70-4651-68
This T-Top Beaded Felt Weatherstrip is designed from the original part for superior fitment, finish and function. This felt weatherstrip installs at the front and rear edges of the roof at the T-Top opening. Sold Individually - Purchase two (2) if replacing both Front and Rear.
Rear Stone Deflector Seal
p/n: 20-2957-29
This Rear Stone Deflector Seal installs between the body and rear bumper. Includes six (6) clips for installation. Designed from original part so it fits correctly.
Brake and Clutch Pedal Pads
p/n: 20-0008-22
Pad, brake and clutch pedal. Slip over type. Automatic transmission and manual brakes.
Division Post Glass Run Channel
p/n: 20-0023-58
This front door Division Post Glass Run Channel is designed from the original part for superior fitment and function. Channel fits between the front of the door glass and the back of the vent window. Two (2) per vehicle.
Splash Apron / A-Arm Dust Shield Filler
p/n: 70-3691-45
This two (2) piece Splash Apron / A-Arm Dust Shield Filler pair is designed from the original part for superior fitment and seal. Filler pieces are die cut from quality masticated rubber to authentic original dimensions. Left and Right pieces fit over suspension a-arms and inside front inner fenders.
Splash Apron / A-Arm Dust Shield Filler
p/n: 70-3690-45
This two (2) piece Splash Apron / A-Arm Dust Shield Filler pair is designed from the original part for superior fitment and seal. Filler pieces are die cut from quality masticated rubber to authentic original dimensions. Left and Right pieces fit over suspension a-arms and inside front inner fenders.
Vent division bar weatherstrip
p/n: 20-1479-56
Front vent window division post seal. Fully molded with metal core and attaching tabs.
Cowl Firewall Weatherstrip
p/n: 20-2021-43
This Cowl Firewall Weatherstrip is designed from the original part for superior fitment and seal. An exact reproduction with correct contours to seal out fumes and eliminate rattles.
Hood Bumper Set
p/n: 20-0032-42
This six (6) piece Hood Bumper set is designed from the original parts for superior fitment and function.
Rear Bumper Stone Deflector
p/n: 20-1569-29
This Rear Bumper Stone Deflector installs between the metal gravel deflector and the inside of the rear bumper. Made from top quality rubber to ensure durability and proper seal.
Spring Shackle and Bushing Set
p/n: 20-2731-32
This Spring Shackle and Bushing Set is for the rear of the rear leaf spring. Designed from original parts for a precise, factory fit. Two (2) sets required per car.
Engine Mount
p/n: 20-1980-11
This Engine Mount is designed from the original part for superior fitment and function. The engine mount works to isolate dampen engine and chassis vibrations.
Fender to Radiator Seal
p/n: 20-1454-42
This two (2) piece Fender to Radiator Seal is designed from the original part for superior fitment and seal. Installs between the front fender and the radiator support.