Taillight to Body Gaskets
p/n: 20-1020-15
This Taillight to Body Gasket pair is designed from the original part for superior fitment and seal. These reproduction gaskets fit between taillight frame housing and the body.
Trunk or Rumble Seat Weatherstrip
p/n: 20-2129-84
This Trunk or Rumble Seat Weatherstrip is designed from the original part for superior fitment and seal. The weatherstrip mounts around the full perimeter of the trunk directly to the body.
Glovebox Door Bumper Stops
p/n: 20-1698-88
Bumper stops for the glovebox door - lower. Rubber Coated Steel like original. This part prevents the glovebox door from opening too far, reduces paint-chipping.
Tailgate Drain Seals
p/n: 70-4007-84
This Tailgate Drain Seal pair includes right and left sides that install at the bottom of the tailgate. These seals are properly molded from originals for a factory like fit.
Tailgate weatherstrip
p/n: 20-1526-87
Weatherstrip, tailgate lower glass sash channel. Goes between glass and channel.
Radiator Side Air Deflector
p/n: 20-0195-31
This three (3) piece Radiator Side Air Deflector set is designed from the original part for superior fitment and function. Left and Right seals are die cut from correct 3/32" masticated rubber to authentic original dimensions. Mounts to core support at side of radiator with included hardware.
Radiator Shroud Seal
p/n: 20-0188-31
Seal, radiator side air deflector. Four (4) inch by fourteen and one eighth (14-1/8) inch.
Rear Bumper Stone Deflector Seal
p/n: 20-2462-29
This Rear Bumper Stone Deflector Seal installs between the rear bumper and body filler splash panel. The seal is used to keep the rear pan from vibrating against the bumper brackets.
Parking Light Lens Gaskets
p/n: 20-0167-16
This Parking Light Lens Gasket pair is designed from the original part for superior fitment and seal. This reproduction gasket fits between the Parking Light Lens and the Parking Light Housing or Bezel.
Radiator Side Air Deflector
p/n: 20-0192-31
This Radiator Side Air Deflector pair is designed from the original part for superior fitment and function. Left and Right seals are die cut from correct 3/32" masticated rubber to authentic original dimensions. Mounts to core support at side of radiator with included hardware.
Front Lower Engine Mount
p/n: 20-0502-11
This Front Lower Engine Mount is designed from original part for correct fitment and function. Molded dense rubber for durability and proper engine vibration isolation.
Battery Hole Cover Seal
p/n: 20-0555-21
This Battery Hole Cover Seal is designed from the original part for superior fitment and seal. This part seals the battery hole cover to the vehicle floor.
Radiator top seal
p/n: 20-0130-31
Seal, radiator support top to hood. Includes special plastic buttons to install. For models with A/C.
Radiator Top Seal
p/n: 20-0184-31
Seal, top of radiator support to radiator. Twenty four (24) inches long.
Backup light gasket
p/n: 20-1246-17
Gaskets, back-up light cover. Used on models without back-up lights.
Windshield Post to Door Weatherstrips
p/n: 20-3093-63
This Windshield Post To Door Weatherstrip pair is designed from the original part for superior fitment and seal. These weatherstrips attache to the body and seal between the A-pillar post and the front section of the door or vent window frame when the door is closed.
Convertible Top Latch Catches and Guides Set
p/n: 70-4655-67
This Convertible Top Latch Catches and Guides Set is an important maintenance piece on Mustang and Cobra models with a convertible top. Replace your cracked j-hook and broken dowel pin receptacles with this quality reproduction four (4) piece set.
Fuel Tank Filler Pipe Grommet
p/n: 70-5002-39
This Fuel Tank Filler Pipe Grommet is designed from the original part for superior fitment and seal. This grommet fits around the vehicles fuel filler pipe between the filler neck and vehicle body.
Stabilizer Bar End Link Set
p/n: 60-0221-33
Twenty-two (22) piece Stabilizer Bar End Link set for both sides of one (1) vehicle, fits front or rear bar. Order two (2) sets for vehicles with front and rear stabilizer bars. Hex head bolt 3/8"-16 NF x 6-15/16" long. Comes with metal sleeve, metal cup washers and rubber grommets.
Kick Panel Hole Cover
p/n: 70-4536-45
This Kick Panel Hole Cover is designed from the original part for superior fitment and function. Cover is made from high-quality EPDM 80 durometer dense rubber to provide excellent durability and service.
Hood to Radiator Weatherstrip
p/n: 20-2961-31
Seal, radiator air deflector to hood. Twenty two and one fourth (22-1/4) inches long. Two (2) piece set.
Steering Column Floorplate
p/n: 20-3158-88
Seal, steering column to floor. Installs under floor mat.
Side Marker Light Gaskets
p/n: 70-4335-17
This Side Marker Light Gasket set is designed as a premium upgrade over the original part for superior fitment and a highly finished look. Fully molded gaskets installs between the side marker and body when not using a chrome bezel.
Upper Windshield Corner Molding
p/n: 20-0806-52
This Upper Windshield Corner Molding pair fits the Left and Right Upper Corner. If your corner molding is starting to show it's age, get that factory look back with these new trim corners.
Brake Pedal Pad
p/n: 20-1044-22
Pad, brake pedal. Models with automatic transmission and manual brakes.
Hood To Fender Bumper Set
p/n: 20-0033-42
This four (4) piece Hood to Fender Bumper Set is a quality reproduction of the original factory part. This rubber bumper attaches to the front fender to support / cushion the hood closure.
Radiator Support To Hood Weatherstrip
p/n: 20-1452-42
This Radiator Support To Hood Weatherstrip is designed from the original part for superior fitment and seal. Includes staples to install. This weatherstrip works to seal the hood to the radiator support for better engine cooling.
Firewall to Hood Weatherstrip - Cowl Lacing
p/n: 20-3006-43
This Firewall to Hood Weatherstrip - Cowl Lacing is designed from the original part for superior fitment and seal. This seal mounts with installation tacks at the rear of the engine bay firewall directly to the body.
Radiator Mounting Pads
p/n: 20-0183-31
This Radiator Mounting Pad pair is designed from the original part for superior fitment and function. These upper mounting pads secure and isolate the radiator at its upper mounting point.
Hood to Top of Radiator Weatherstrip
p/n: 20-1083-42
This Hood to Top of Radiator Weatherstrip is designed from the original part for superior fitment and seal. An exact reproduction of the original profile. This weatherstrip installs at the top of the radiator to seal between the radiator and hood.
Hood Bumper
p/n: 20-0014-42
Bumpers, hood front to radiator support. Five sixteenths (5/16) inch by twenty four (24) thread.