Door Lower Weatherstrips
p/n: 20-1652-73
This three (3) piece Lower Door Weatherstrip set is designed from the original part for superior fitment and seal. Use full-length for front doors, cut third piece in half to complete installation for both rear doors.
Splash Apron / A-Arm Dust Shield Fillers
p/n: 70-4926-45
This two (2) piece Splash Apron / A-Arm Dust Shield Filler pair is designed from the original part for superior fitment and function. Filler pieces are die cut from quality masticated rubber to authentic original dimensions. Left and Right pieces fit over suspension upper a-arms and inside front inner fenders.
Door Glass Run Channel - without Vent Window
p/n: 70-4849-58
This Door Glass Run Channel is designed from the original part for superior fitment and function. The glass run simply presses into the front, top and back section of the door channel. This single piece fits either the driver (LH) or passenger (RH) doors without vent windows.
Peel-N-Stick Trunk Weatherstrip
p/n: 20-1389-WT
This Peel-N-Stick Trunk Weatherstrip is designed for superior fitment and seal. The weatherstrip mounts around the full perimeter of the trunk directly to the body. Easy to install 3M Peel-N-Stick backing provides superior adhesion for reliable performance.
Front Door Division Bar Glass Run Channel
p/n: 20-3063-58
This Front Door Division Bar Glass Run Channel is designed from the original part for superior fitment and function. Ready for attaching to your original brackets. Length: 30 inches.
Voltage Regulator Cover Shield
p/n: 70-4531-17
This Voltage Regulator Cover Shield is designed from the original part for superior fitment and function. This cover shield is located over and above the voltage regulator.
Liftgate Frame to Glass Weatherstrip
p/n: 70-4847-81
This Body to Liftgate Weatherstrip is designed from the original part for superior fitment and seal. This weatherstrip mounts on the vehicle's liftgate frame where the glass seals against it.
Windshield Frame Upper (Header) Weatherstrip
p/n: 70-4476-52
This Windshield Frame Upper (Header) Weatherstrip is designed from the original part for superior fitment and sealing. This windshield frame upper weatherstrips mounts to seal between the windshield frame and hardtop of the vehicle. Made of a high-quality EPDM rubber as the original.
Window Felt Outer Beltline Weatherstrip
p/n: 80-1051-57
An outer side window horizontal weatherstrip pair (also known as beltline weatherstrip). This ready to install two (2) piece pair includes only the outer seals (the part sealing the outside of the vehicle) for both side door windows.
Radiator Mounting Pad Set
p/n: 20-0570-45
This Radiator Mounting Pad Set is designed from the original parts for a factory like appearance and function.
Vent Window Division Post Weatherstrips
p/n: 20-0470-56
This Vent Window Division Post Weatherstrip is fully molded in high quality rubber and with a metal core. This part fits opposite the glass run channel and seals the vent window when the vent is closed. Part installs using the included rivets.
Steering Column At Floor Seal
p/n: 20-1072-36
This Steering Column At Floor Seal is designed from the original part for superior fitment and sealing. This part fits around the steering column to seal the column at the body floor pan.
Vent Division Bar Weatherstrip
p/n: 20-0527-56
Front vent window division post seal. Fully molded with metal core and attaching tabs.
Radiator Support To Hood Seal - With A/C
p/n: 20-1082-42
This Radiator Support To Hood Weatherstrip is designed from the original part for superior fitment and seal. This rubber weatherstrip fits at the front of the vehicle to seal between the radiator and the hood when hood is closed. Installation Push-Pins are included.
Upper Door Weatherstrips - Top of Door
p/n: 20-0819-72
This Upper Door Weatherstrip pair is designed from the original parts for superior fitment and seal. Used as an upper / top of door weatherstrip on both doors. This part was used on 1978-1979 Ford Trucks but can also be retrofitted to 1973-77 Ford Pickups as well to improve the door seal.
Radiator Support to Frame Pad Set
p/n: 20-0535-45
This Radiator Support To Frame Pad Set is designed from the original parts for a factory like appearance and function.
Vent division bar weatherstrip
p/n: 20-1894-56
Front vent window division post seal. Fully molded with metal core and attaching tabs.
Vent division bar weatherstrip
p/n: 20-1893-56
Front vent window division post seal. Fully molded with metal core and attaching tabs.
Headlight Mounting Stand Pads
p/n: 20-0316-14
This Headlight Mounting Stand Pad pair is designed from the original part for an authentic fit, finish, and appearance. These mounting pads fit between the headlight stands and the front fenders.
Firewall Grommet Set
p/n: 20-1997-20
This Firewall Grommet Set contains eleven (11) pieces including drain tube, plugs and grommets for the firewall. Designed from the original part for superior fit and seal.
Convertible B-Pillar End Cap Fillers
p/n: 70-4192-63
This Convertible B-Pillar End Cap Filler pair is designed from the original part for superior fitment and sealing. This rubber filler pair attaches to the body B-Pillars to seal between that quarter post and the door when closed.
Spring Shackle Bushing Set
p/n: 20-1836-32
This Spring Shackle Bushing Set is for the front of the rear leaf spring. One (1) set completes one spring.
Gearshift Floorplate
p/n: 20-0464-88
Seals, transmission cover to floor. Cork and rubber. Three (3) piece set.
Hinge Pillar Post Filler - Convertible
p/n: 70-4658-63
This convertible Hinge Pillar Post Filler seal is designed from the original part for superior fitment and sealing. This pair of quarter post fillers feature all original details. The seal pair does both LH and RH sides and work to fill the gap between the door gasket and body.
Fuel Tank Filler Neck Grommet
p/n: 20-0345-39
This Fuel Tank Filler Neck Grommet is designed from the original part for superior fitment and seal. This grommet fits around the vehicles fuel filler neck between the filler neck and vehicle body.
Fabric Hood Lacing
p/n: 20-0354-42
This Fabric Hood Lacing installs where the hood rests on the cowl panel. Original woven style lacing complete with installation tacks. Sold as a forty-nine (49) inch strip.
Hatchback Weatherstrip
p/n: 20-2864-84
This Hatchback Weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the hatch area directly to the body.
Hood Bumper Set
p/n: 20-0078-42
This eight (8) piece Hood Bumper set is designed from the original parts for superior fitment and function.
Hood to Cowl Weatherstrip
p/n: 20-1090-42
This Hood to Cowl Weatherstrip is designed from the original part for superior fitment and seal. An exact reproduction seal with installation fastener clips included.
Vent Window Division Post Weatherstrips
p/n: 20-0562-56
This Front Vent Window Division Post Weatherstrip pair is designed from the original part for superior fitment and seal. These pieces mount on the vertical division post with rivets and seal as the vent glass closes against them.
Tailgate to Body Bumpers
p/n: 70-4493-87
This Tailgate to Body Bumper pair is designed from the original part for superior fitment and function. This body bumper fits on each side of the body to tailgate opening on the body and adjacent to the striker knob on each side.
Tailgate Bumper Set
p/n: 70-4494-87
This four (4) piece Tailgate Bumper Set is designed from the original part for superior fitment and function. These bumpers fit on each side of the body to tailgate opening at the bottom of the opening and on each side.
Ulta-Mat Firewall Heat and Sound Insulator Underlayment
p/n: 70-4779-88
This Ulta-Mat Firewall Heat and Sound Underlayment is a die-cut insulator material for the engine firewall interior side. Underlayment pieces are made from a flexible and lightweight foil facing foam rubber sound and heat insulation material.
Ulta-Mat Trunk Divider Heat and Sound Underlayment
p/n: 70-4777-88
This Ulta-Mat Trunk Divider Heat and Sound Underlayment is a die cut insulator material for the trunk divider piece. Underlayment pieces are made from a flexible and lightweight foil facing foam rubber sound and heat insulation material.
Spring Shackle Bushing Set
p/n: 20-0867-32
This Spring Shackle Bushing Set is for one (1) front of the rear leaf spring. Designed from original parts for a precise, factory fit.
Gearshift Knob
p/n: 20-0763-24
This black column shift lever Gearshift Knob is designed from the original part for a superior fit and finish. This reproduction part is a direct screw on replacement for that broken, aged-out original knob.
Body / Cowl To Fender Seals
p/n: 20-0222-44
This Body / Cowl to Fender Seals pair is designed from the original part for superior fitment and function. These filler pieces are die cut from quality masticated rubber to authentic original dimensions.
