Ulta-Mat Quarter Panel Heat and Sound Underlayment
p/n: 70-4784-88
This Ulta-Mat Quarter Panel Heat and Sound Underlayment pair is pre-cut for a direct-fit installation. Underlayment pieces are made from a flexible and lightweight foil facing foam rubber sound and heat insulation material.
Vent Window Division Post Weatherstrips
p/n: 20-1891-56
Front vent window division post seal. Fully molded with metal core and attaching tabs.
Top of Door Weatherstrips - Roof Rail
p/n: 70-4022-73
This Top of Door Weatherstrip pair for the left and right side doors mounts on the top part of the door frame using the pre-applied peel-n-stick adhesive tape.
Trunk Decklid Weatherstrip
p/n: 20-2861-84
This Trunk Decklid Weatherstrip is designed from the original part for superior fitment and seal. The weatherstrip mounts around the full perimeter of the trunk decklid.
Door Weatherstrip End Caps
p/n: 70-4659-73
This Door Weatherstrip End Cap pair is designed from the original part for superior fitment and seal. Left and Right End Caps mount on the end of the door weatherstripping, near the quarter windows on convertible models.
Windshield Trim To Glass Weatherstrips - Convertible
p/n: 70-4660-52
This Windshield Trim To Glass Weatherstrip pair for convertibles is designed from the original part for superior fitment, finish and function. These LH and RH windshield trim weatherstrips go between the windshield and the windshield molding.
Fuel Filler Pipe To Trunk Floor Seal
p/n: 20-2739-41
This Fuel Filler Pipe To Trunk Floor Seal is designed from the original part for superior fitment and seal. This part fits around the vehicle fuel filler pipe where the filler pipe goes through the trunk floor.
Rear Transmission Mount
p/n: 20-0090-25
This Transmission Mount is designed from the original part for superior fitment and function. This rear mount fits between the transmission and the crossmember to locate and retain the rear of the engine / transmission powertrain. Automatic and Manual transmissions.
Trunk Spring Bumpers
p/n: 70-4736-87
This Trunk Spring Bumper pair is a quality reproduction of the original factory part. These trunk springs feature high-quality metal construction and a durable rubber bumper that helps to eliminate metal to metal contact.
Firewall to Hood Seal
p/n: 70-4275-43
This Firewall to Hood Seal weatherstrip is designed from the original part for superior fitment and seal. Seal installs on the top edge of the firewall where the hood meets the cowl. Push-on to body mounting with no adhesive required.
Gearshift Boot - Brown
p/n: 20-2166-26
This Gearshift Boot is designed from the original part for superior fitment and seal. This boot fits over the gearshift tower to make a weathertight connection for the transmission gearshift rod as it passes up through the vehicle floorboard.
Trunk Weatherstrip
p/n: 70-4196-84
This Trunk Weatherstrip is designed from the original part for superior fitment and seal. This fully bonded seal mounts around the full perimeter of the trunk directly to the body.
Vent Window Division Post Weatherstrips
p/n: 20-0710-56
Front Vent Window Division Post seal pair that functions as the back edge of the vent window seal. Fully molded rubber over a metal core and attaching tabs.
Fender Skirt Edge Seal
p/n: 20-1863-44
This Fender Skirt Edge Seal pair is designed from the original part for superior fitment and seal. For original skirts only this seal fits between fender skirt and rear fender body.
Fender Skirt Edge Weatherstrip
p/n: 20-1862-44
This Fender Skirt Edge Weatherstrip pair is designed from the original part for superior fitment and seal. For original skirts only this seal fits between fender skirt and rear fender body.
Hood Bumper Set
p/n: 20-1588-42
This twelve (12) piece Hood Bumper set is designed from the original parts for superior fitment and function.
Quarter Window Vertical Leading Edge
p/n: 20-1656-76
This Quarter Window Vertical Leading Edge Weatherstrip pair is designed from the original part for superior fitment, finish and function. This part fits Ford convertible only and is the weatherstrip that holds the quarter window glass in the frame.
Splash Apron
p/n: 20-2763-45
This ten (10) piece Splash Apron set is designed from the original part for superior fitment and seal. Original type plastic fasteners included.
Splash Apron Fender Seal
p/n: 20-0877-44
This Splash Apron Fender Seal pair installs from the inner fender panel to the firewall. Made of high quality EPDM rubber and to the original design for a factory like fit.
Radiator Mounting Pad Set
p/n: 20-0641-31
This Radiator Mounting Pad Set is designed from the original parts for a factory like appearance and function.
Splash Apron / A-Arm Dust Shield Filler
p/n: 70-3486-45
This two (2) piece Splash Apron / A-Arm Dust Shield Filler pair is designed from the original part for superior fitment and seal. Filler pieces are die cut from quality masticated rubber to authentic original dimensions. Left and Right pieces fit over suspension a-arms and inside front inner fenders.
U Jamb lock pillar filler
p/n: 20-2610-79
Door lock pillar seal. This part seals the bottom of the rear side window, and may also be known as a door jamb seal.
Cab Running Board Seal
p/n: 20-0519-45
This Cab Running Board Seal installs between the bottom of the cab and the running board. Sold as a pair for the left and right side.
Steering Column Tube To Floor Gasket
p/n: 20-1531-88
This Steering Column Tube To Floor Gasket is designed from the original part for superior fitment and sealing. This part fits around the steering column to seal the column tube through the body floor pan.
Vent Window Division Post Weatherstrips
p/n: 20-1892-56
This Front Vent Window Division Post Weatherstrip pair is designed from the original part for superior fitment and seal. This piece mounts on the back edge of the vertical vent window division post.
Spring Shackle Bushing Set
p/n: 20-1834-32
This Spring Shackle Bushing Set is for the rear of the rear leaf spring on car models and the front of the front leaf spring on truck models. Two (2) sets needed per vehicle.
T-Top Headliner Retainer
p/n: 70-4652-88
This T-Top Headliner Retainer is designed from the original part for superior fitment, finish and function. This retainer strip pinches the headliner to the body to hold it in place. Sold Individually - Purchase two (2) to complete the driver and passenger overhead panel.
Firewall to Hood Weatherstrip - Cowl Lacing
p/n: 20-1088-42
This Firewall to Hood Weatherstrip is designed from the original part for superior fitment and seal. An exact reproduction of the original profile. This single piece cowl lacing seal mounts at the rear of the engine bay to seal between the hood and vehicle body cowl / firewall.
Firewall To Hood Weatherstrip - Cowl Lacing
p/n: 20-0790-42
This Firewall To Hood Weatherstrip - Cowl Lacing is made of high-quality EPDM dense rubber and to the original design for a factory like fit and appearance. Comes with mounting clips installed.
Hood Bumper Set
p/n: 20-0684-42
This six (6) piece Hood Bumper set is designed from the original parts for superior fitment and function. The set fits Ford F-Series Trucks.
Hood Bumper Set
p/n: 20-0683-42
This six (6) piece Hood Bumper set is designed from the original parts for superior fitment and function. The set fits Ford F-Series Trucks.
Retractable roof weatherstrip
p/n: 20-1921-67
Pads, flapper. (Front of top rests on when top is down.) Glues to top of wheel well.
Fender Welting
p/n: 20-1591-44
This black Fender Welting is designed from the original part for superior fitment and seal. This welting material fits between the fenders and the vehicle body. Eight (8) foot length.
Rear Window Gasket
p/n: 20-0394-81
This Rear Window Gasket is made just like the original and mounts around the full perimeter of the back glass. The ends may require trimming and bonding for installation.
Air Deflector - At Bottom Core Support
p/n: 20-0193-31
This Air Deflector piece is designed from the original part for superior fitment and function. Piece is die-cut from quality masticated rubber to authentic original dimensions. This piece fits at the bottom of radiator core support to frame on V8 models.
Front Engine Mount
p/n: 20-0594-11
This Front Engine Mount is designed from original part for correct fitment and function. Rubber coated over a metal core for durability and proper engine vibration isolation.
Front Of Door To Window Seals
p/n: 20-2838-79
This Front Of Door to Window Seal pair is designed from the original part for superior fitment and seal. This is the door seal that mounts at the front of the door and seals where the door glass comes through.
Hood Bumper Set
p/n: 20-0359-42
This ten (10) piece Hood Bumper set is designed from the original parts for superior fitment and function. Manufactured to OEM original standards.
Hood to Cowl Weatherstrip
p/n: 20-1311-42
Kit, cowl lacing. his seal mounts at the rear of the engine bay to seal between the hood and vehicle body cowl.
Radiator Core Support Seal - At Top
p/n: 20-0196-31
This Radiator Core Support Seal is made from quality EPDM rubber to authentic original dimensions. A direct fit piece that mounts on top of radiator core support with the included hardware.
Radiator Top Seal
p/n: 20-0181-31
Seal, top of radiator support to hood air deflector. Fifty (50) inches long. For the following engines: 240, 289, 352, 390, 427, or 428.
Radiator Top Seal
p/n: 20-0194-31
Seal, radiator support to bottom of radiator. "L" shaped. Twenty six and three eighths (26-3/8) inches long.
Cobra Clutch And Brake Pedal Pads
p/n: 70-4202-22
This reproduction Cobra Clutch And Pedal Pad pair mounts around the full perimeter of the brake and clutch pedals for a precise, factory fit. Replaces original pedal pads. Manufactured with a thick, quality rubber construction and an embossed striking Cobra emblem on each pad.
Cobra Clutch and Brake Pedal Pads
p/n: 70-4201-22
This reproduction Cobra Clutch and Pedal Pad pair mounts around the full perimeter of the brake and clutch pedals for a precise, factory fit. Replaces original pedal pads. Manufactured with a thick, quality rubber construction and an embossed striking Cobra emblem on each pad.
Fender Skirt Edge Weatherstrip
p/n: 20-3019-44
This Fender Skirt Edge Weatherstrip pair is designed from the original part for superior fitment, finish, and seal. This weatherstrips fits between the rear wheel fender skirt and the rear fender quarter panel.
Side Window Vertical Leading Edge
p/n: 20-3126-80
Side window vertical leading edge weatherstrip. Cut to length. NOT cloth covered. This part attaches to the vertical edge of the rear side windows when the rear side windows are fully raised. Designed from the original part for superior fitment and seal.
Hood To Radiator Weatherstrip
p/n: 70-3351-43
This Hood To Radiator Weatherstrip is designed from the original part for superior fitment and seal. The weatherstrip has the proper rubber cross section.
Lower Door Weatherstrip Retainers
p/n: 20-0393-73
This Lower Door Weatherstrip Retainer pair is designed from the original part for superior fitment, finish and function. A pair of retainers for the lower door weatherstrips that mount on the left and right rocker sills. Does not include door weatherstrips.
Vent Window Division Bar Weatherstrips
p/n: 20-0709-56
This Front Vent Window Division Bar / Post Weatherstrip pair is designed from the original part for superior fitment and seal. This piece mounts with rivets on the vertical division bar and seals as the vent window glass closes against it.
Radiator Lower Mount Insulators
p/n: 20-2718-31
This Radiator Lower Mount Insulator pair is a quality reproduction of the original factory part. These rubber insulators fit between the Radiator Lower Mounting brackets and the radiator.
Radiator Upper Mount Insulators
p/n: 20-2716-31
This Radiator Upper Mount Insulator pair is a quality reproduction of the original factory part. These rubber insulators fit between the Radiator Upper Mounting brackets and the radiator.
Trunk Decklid Weatherstrip
p/n: 20-2858-84
This Trunk Deckid Weatherstrip is designed from the original part for superior fitment and seal. The weatherstrip mounts around the full perimeter of the trunk lid.
Generator Outer Splash Shield
p/n: 20-1035-21
This Generator Outer Splash Shield is designed from the original part for superior fitment and seal. Includes attaching staples.
Front Suspension Lower Control Arm Bumper
p/n: 20-0011-32
This Front Suspension Lower Control Arm Bumper is designed from the original part for superior fitment, finish, and function. This suspension bumper mounts to the front lower control arm to prevent metal to metal contact.
Fuel Filler Neck Grommet
p/n: 20-2009-39
This Fuel Filler Neck Grommet is designed from the original part for superior fitment and seal. Manufactured to OEM specifications to install for an authentic fit and finish.
Removable Top Front Weatherstrip - On Fiberglass Roof
p/n: 70-2999-68
This Removable Top Front Weatherstrip is designed from the original part for superior fitment and sealing. This weatherstrip installs directly on the front of the fiberglass roof shell with weatherstrip adhesive glue (not included) and presses against the metal roof cab weatherstrip.
Top Of Door Weatherstrips
p/n: 20-1646-73
This Top of Door Weatherstrip is designed from the original part for superior fitment, finish and function. One weatherstrip is enough for two doors. Cut to fit as needed for each upper door openings.
Windshield Frame To Body Weatherstrip
p/n: 20-2040-52
This Windshield Frame To Body Weatherstrip is designed from the original part for superior fitment and seal. This weatherstrip fits to the vehicle body to seal the crank in or out windshield.
Firewall Grommet Set
p/n: 20-1994-20
This Firewall Grommet Set contains five (5) pieces including drain hose and grommets for the main wiring loom. Designed from the original part for superior fit and seal.
Front Fender Splash Shield Set
p/n: 20-2762-45
This six (6) piece Front Fender Splash Shield Set is designed from the original part for superior fitment and seal. Includes attaching staples.
Taillight Rim To Body Gaskets
p/n: 20-0116-15
This Taillight Rim To Body Gasket pair is designed from the original part for superior fitment and seal. Trim Ring To Taillight Housing Gasket pair that mounts on the outer edge of the trim ring.
Convertible and T-Top Retainer Weatherstrip
p/n: 20-2805-67
This Convertible and T-Top Retainer Weatherstrip fits between the body and the metal retainer that holds the weatherstrip in place. One (1) roll per vehicle.
Brake and Clutch Pedal Pads
p/n: 20-2452-22
This Brake and Clutch Pedal Pad pair is made from high-quality EPDM rubber for a precise, factory like fit. Manufactured to OEM specifications to install for an authentic fit and finish.
Firewall to Hood Weatherstrip
p/n: 70-3123-42
This Firewall to Hood Weatherstrip is designed from the original part for superior fitment and seal. An exact reproduction of the original profile. Installs with the pre-installed clips on the front edge of the cowl.
