Stationary Quarter Window Gasket
p/n: 60-0424-77
This Stationary Quarter Window Gasket pair is designed from the original part for an authentic fit, finish, and appearance. This fixed rear quarter window channel is vulcanized in one piece with correct sharp corner. No splicing required.
Steering Column - Floor Seal
p/n: 70-3358-36
This Steering Column is designed from the original part for superior fitment and sealing. Seal part is die cut from quality masticated rubber to authentic original dimensions. This part fits around the steering column to seal the column through the body floor pan inside the vehicle.
Steering Column Gasket - Automatic Transmission
p/n: 70-4467-36
This Steering Column gasket is designed from the original part for superior fitment and sealing. Gasket is machine cut from quality sponge rubber to authentic original dimensions. This part fits around the steering column to seal the column through the body floor pan.
Steering Knuckle Support Seal
p/n: 50-0199-35
This Steering Knuckle Support Seal is designed from the original part for an authentic fit, finish, and appearance. Fits at the steering knuckle support at the upper pivot pin. Four (4) required per car.
Suspension Bumper - Front Lower Control Arm
p/n: 50-0092-32
This Suspension Bumper is designed from the original part for superior fitment and function. Bumper mounts to the front suspension lower control arm. Two (2) per car required.
Swing-Out Quarter Window Weatherstrips
p/n: 70-4124-76
This Swing-Out Quarter Window Weatherstrip pair is not a reproduction of an OEM part, but rather an expertly engineered solution specific for this application. Guaranteed performance and "factory-like" look.
Tailgate Bumper
p/n: 70-1910-87
This Tailgate Bumper is designed from the original part for superior fitment, finish and function. This station wagon tailgate bumper is commonly used on GM station wagon models.
Tailgate Bumper - Upper and Lower
p/n: 70-1827-87
This upper / lower Tailgate Bumper is designed from the original part for superior fitment and seal. Fully molded with top quality EPDM rubber over corrosion resistant brass cores to ensure durability and function.
Tailgate Latch Striker Bumper
p/n: 70-1911-87
This Tailgate Latch Striker Bumper is a quality reproduction of the original factory part. This rubber bumper attaches to the station wagon tailgate to cushion its closure. Usually requires two (2) bumpers each per vehicle.
Tailgate Lower Weatherstrip
p/n: 70-2123-85
This Tailgate Lower Weatherstrip is designed from the original part for superior fitment and seal. The seal mounts to the sides and bottom of the tailgate with properly spaced plastic clips.
Tailgate or Back Door Weatherstrip
p/n: 70-3604-84
This Tailgate or Back Door Weatherstrip is designed from the original part for superior fitment and seal. The seal mounts with properly spaced plastic clips around the full perimeter of the rear opening.
Tailgate Outer Window Felt Weatherstrip
p/n: 80-0011-57
This reproduction Original material Tailgate Glass Outer Window Felt Weatherstrip is designed from the original part for superior fitment and seal. This flat chrome bead outer window felt wipes the outside tailgate window glass when the glass is lowered.
Tailgate run channel filler
p/n: 70-3302-87
Tailgate glass run channel, upper molded section, left and right. Molded piece with metal core ready to attach to tailgate window run channel.
Tailgate Weatherstrip
p/n: 70-2091-85
This Tailgate Weatherstrip is designed from the original part for superior fitment and seal. The seal mounts to the sides and bottom of the tailgate with properly spaced plastic clips. Includes molded ends.
Tailgate Weatherstrip
p/n: 70-3299-85
These tailgate weatherstrips are designed from the original part for superior fitment and seal. The seals mount to the sides and bottom of the tailgate opening directly to the body. Includes molded ends.
Tailgate Weatherstrip
p/n: 82-0181-84
This tailgate weatherstrip is designed from the original part for superior fitment and seal. The seal mounts to the sides and bottom of the tailgate opening directly to the body. Includes molded ends.
Tailgate Weatherstrip
p/n: 70-1909-85
This Tailgate Weatherstrip is designed from the original part for superior fitment and seal. The weatherstrip mounts to the sides and bottom of the tailgate with properly spaced plastic clips. Includes molded ends that contain brass cores.
Tailgate Weatherstrip
p/n: 70-3424-84
This Tailgate Weatherstrip is designed from the original part for superior fitment and seal. The weatherstrip mounts to the sides and bottom of the tailgate with properly spaced plastic clips. Includes molded ends.
Tailgate Weatherstrip
p/n: 70-1519-87
Weatherstrip, tailgate opening. Pinchweld finish on body. This tailgate weatherstrip reproduction is designed from the original part for superior fitment and seal.
Tailgate Window Felt Beltline Weatherstrips
p/n: 80-0804-57
This Tailgate Glass Window Felt Beltline Weatherstrip reproduction pair is designed from the original part for superior fitment and seal. This window felt molding mounts to the tailgate with the included fasteners.
Taillight Gasket Kit
p/n: 70-3566-15
Kit, taillight lens and mounting gaskets. Ten (10) piece set. Includes 1 pair of #70-3565-15 lens to tail light body mounting seals and eight (8) each of 70-3564-15 tail light assembly to body seals.
Taillight Gasket Set
p/n: 70-2243-15
A (6) piece Taillight Gasket Set designed to cushion and protect housing and body sheet metal.
Taillight Gaskets
p/n: 60-0671-15
This Taillight To Fender Gasket pair is designed from the original part for superior fitment and sealing. These reproduction gaskets fit between taillight frame housing and the body. Two 1/4" strips of sponge rubber cut 26-3/4" long. One (1) pair required per vehicle.
Taillight Lens Gasket
p/n: 70-3565-15
Gasket, taillight lens mounting gasket. Machine die cut from 1/4" thick sponge rubber. Seals tail light lens to tail light assembly. Included in our kit #70-3566-15.
Taillight Lens Gaskets
p/n: 70-3556-15
This Taillight Lens Gasket includes left and right sides. Mounts between the tail-light-lens and the lens-retaining-body for a perfect fit. Made of fully molded soft-dense rubber compound to ensure proper installation and performance.
Taillight Mounting Pad
p/n: 27-0069-15
Pad, taillight mounting pad to body. Fully molded with original details. Length: 6.375 inches.
Taillight Mounting Pad
p/n: 27-0062-15
Pad, taillight to body mounting. Right and left molded as original with proper bead lip. Length: 4.50 inches.
Taillight Mounting Pad
p/n: 27-0068-15
Pad, taillight and license bracket mounting. Not listed in Master Parts Books, but we have seen this part on several original cars.
Taillight Mounting Pad
p/n: 70-2166-15
Pad, taillight mounting to rear quarter panel. Proper extrusion cross section like original. Two (2) strips twenty-four (24) inch long. Length: 24.0 inches.
Taillight Mounting Pad
p/n: 70-3564-15
Gasket, taillight mounting pad. Eight (8) used per car. Machine die cut 5/8" thick sponge rubber seals tail light assembly to body. Included in our kit part number #70-3566-15.
Taillight Mounting Pad
p/n: 27-0025-15
Pad, taillight mounting, right and left.Length: 5.9375 inches.
Traction Bar Bumper
p/n: 70-2293-35
This Traction Bar Bumper is designed from the original part for superior fitment and function. An excellent reproduction of part found on models with radius rod traction bars.
Transmission Mount
p/n: 70-2058-25
This Transmission Mount is a new aftermarket replacement mount manufactured to meet or exceed factory specifications.. One (1) required per vehicle.
Trunk - Decklid Bumper
p/n: 70-3528-87
This Trunk-Decklid Bumper is a quality reproduction of the original factory part. This adjustable rubber bumper attaches to the vehicle body to support / cushion the trunk lid closure.
Trunk Bumper
p/n: 50-0163-87
Bumper, trunk. Brass core, screw held. Two (2) per car.Length: 1.5 inches. Width: .75 inches.
Trunk Bumper
p/n: 34-0399-87
Bumper, trunk opening on lid. Metal core, as original, screw held. Two (2) required per car.
Trunk Bumper
p/n: 70-0296-87
T-nut, trunk bumper in gutter at sides, brass core tapped 10-32 thread. Two (2) required per car. For models having partial weatherstrip in gutter of body.
Trunk Bumper
p/n: 50-0546-87
Bumper, trunk. On side near hinge end. Made with metal core.Width: 1.625 inches. Height: 1.0 inches.
Trunk Deck Lid Rubber Bumpers
p/n: 70-2601-42
This Trunk Deck Lid Rubber Bumper pair is designed from the original part for superior fitment, finish and function. The correct OE style trunk deck lid rubber bumpers stoppers. Two required per car.
Trunk Handle / License Light Mounting Pad
p/n: 27-0035-17
This Trunk Handle and License Light Mounting Pad is designed from the original part for an authentic fit, finish, and appearance.
Trunk Handle Grommet
p/n: 50-0183-87
Grommet, trunk handle bezel-thru-trunk lid. Special size, one (1) inch inside diameter.Buick 1937 Grommet, trunk handle bezel-thru-trunk lid.