Insulator
p/n: 30-0404-48
Insulator, used on various places on vehicle. Uses 10 to 14 per car running board to frame bracket. Replaces factory #324851.
2-1/4" Body Hole Plug
p/n: 35-0863-45
This Body Hole Plug is fully molded and designed from the original part for superior fitment and seal. Designed for the trunk, however the generic shape makes this plug usable for a variety of applications.
Front Fender Pads
p/n: 20-1866-45
This Front Fender Pad pair is designed from the original part for superior fitment and seal. These weatherstrip pads fit at the top rear of the front fender to cowl panel.
#10-32 Well Nuts - 2 Piece Pack
p/n: 70-4862-45
These neoprene rubber Well Nuts have a #10-32 captive brass nut. Overall length is 1-1/8". Packaged in a two (2) piece pack. Excellent for use in many applications.
#10-32 Well Nuts - 3 Piece Pack
p/n: 70-4863-45
These neoprene rubber Well Nuts have a #10-32 captive brass nut. Overall length is 9/16". Packaged in a three (3) piece pack. Excellent for use in many applications.
#10-32 Well Nuts - 3 Piece Pack
p/n: 70-4861-45
These neoprene rubber Well Nuts have a #10-32 captive brass nut. Overall length is 19/32". Packaged in a three (3) piece pack. Excellent for use in many applications.
1/4"-20 Well Nuts - 2 Piece Pack
p/n: 70-4860-45
These neoprene rubber Well Nuts have a 1/4-20 captive brass nut. Overall length is 21/32". Packaged in a two (2) piece pack. Excellent for use in many applications.
1/4"-20 Well Nuts - 2 Piece Pack
p/n: 70-4864-45
These neoprene rubber Well Nuts have a 1/4-20 captive brass nut. Overall length is 7/8". Packaged in a two (2) piece pack. Excellent for use in many applications.
1/4"-20 Well Nuts - 4 Piece Pack
p/n: 70-4866-45
These neoprene rubber Well Nuts have a 1/4-20 captive brass nut. Overall length is 1-1/16". Packaged in a four (4) piece pack. Excellent for use in many applications.
M6-1.0 Well Nuts - 2 Piece Pack
p/n: 70-4865-45
These neoprene rubber Well Nuts have a metric M6-1.0 captive brass nut. Overall length is 21/32". Packaged in a two (2) piece pack. Excellent for use in many applications.
15/16" Utility Plug
p/n: 35-0099-20
This Utility Plug is fully molded and designed from the original part for superior fitment and seal. This plug is made from high-quality EPDM dense rubber to provide excellent durability.
1-1/8" Antenna Hole Plug
p/n: 35-0327-45
This Antenna Hole Plug is fully molded and designed from the original part for superior fitment and seal. Designed for antenna mounting for inner fender at shroud, vehicles without a fender-mounted antenna.
3/4" Floor Pan Grommet
p/n: 35-0515-20
This Floor Pan Grommet is fully molded and designed from the original part for superior fitment and seal. This grommet is made from high-quality EPDM dense rubber to provide excellent durability.
Body Hole Plug
p/n: 20-1041-21
Plug, cowl and floor pan. This body plug covers a sheet metal hole that is one and one seven eighths (1-7/8) inch in diameter.
1-3/8" Access Hole Plug
p/n: 35-0517-45
This Access Hole Plug is fully molded and designed from the original part for superior fitment and seal. This plug is made from high-quality EPDM dense rubber to provide excellent durability. Designed for rocker panel end, under fender.
1" Utility Plug
p/n: 35-0457-45
This Utility Plug is fully molded and designed from the original part for superior fitment and seal. This plug is made from high-quality EPDM dense rubber to provide excellent durability.
1-1/16" Firewall Grommet
p/n: 32-0134-20
This Firewall Grommet is fully molded and designed from the original part for superior fitment and seal. Designed for firewall applications such as passing electrical wiring and cables through the frame.
Body Hole Plug
p/n: 20-0843-20
Plug, style-side bed side panel. One and five eighths (1-5/8) inch diameter. Fits 1-1/16" hole.
9/16" Floor Pan Plug
p/n: 35-0171-20
This Floor Pan Plug is fully molded and designed from the original part for superior fitment and seal. This plug is made from high-quality EPDM dense rubber to provide excellent durability.
Roof Top Insert Weatherstrip
p/n: 20-0102-45
A Roof Top Insert Weatherstrip for closed cars without turret top. Fits the groove between cloth top center panel and steel surround. Available by the foot.
3/4" Floor Pan Plug
p/n: 35-0262-20
This Floor Pan Plug is fully molded and designed from the original part for superior fitment and seal. This plug is made from high-quality EPDM dense rubber to provide excellent durability. Up to twelve (12) used per vehicle.
3/8" Utility Body Plug
p/n: 35-0458-45
This Utility Body Plug is fully molded and designed from the original part for superior fitment and seal. This plug is made from high-quality EPDM dense rubber to provide excellent durability.
1-1/4" Body Hole Plug
p/n: 20-1039-21
This Body Hole Plug is designed from the original part for superior fitment, finish and function. This plug is made from high quality EPDM dense rubber to provide excellent durability. This body plug covers a sheet metal hole that is one and one fourth (1-1/4") inches in diameter.
Body Hole Plug
p/n: 20-1040-21
This Body Hole Plug is designed from the original part for superior fitment, finish and function. This plug is made from high quality EPDM dense rubber to provide excellent durability. This body plug covers a sheet metal hole that is one and one half (1-1/2") inch in diameter.
Stainless Steel Staples - Universal
p/n: 70-4675-45
This twenty-four (24) piece Stainless Steel Staple set is USA made from heavy duty, corrosion resistant steel. Commonly used for splash apron sets, dust shields, and window felt beltlines. Excellent for use in many applications. Staples measure 1/2" x 1/2" inch.
3/4" Body Hole Plug
p/n: 20-1038-21
This Body Hole Plug is designed from the original part for superior fitment, finish and function. This plug is made from high quality EPDM dense rubber to provide excellent durability. This body plug covers a sheet metal hole that is three-fourths (3/4") inches in diameter.
1-1/16" Wiring Grommet
p/n: 32-0369-20
This Wiring Grommet is fully molded and designed from the original part for superior fitment and seal. Designed to run the wiring harness through the fender skirts or hood latch lower mounting panels.
Chrome Molding Washer
p/n: 60-0727-45
Washer, for attaching chrome moldings on body. Fits into metal cup retainer. Three fourths (3/4) inch diameter, use as required.
Glovebox and License Plate Bumper
p/n: 20-2889-45
Bumpers, glovebox and/or license plate. Used as glove box door bumpers for 65-66 and 71-73 models, used as license plate bumper for 65-70 models.
Roof Rack Assembly Well Nut w/Screw, M5-0.8
p/n: 70-4869-46
This neoprene rubber Well Nut with Screw has a metric M5-0.8 captive brass nut. Excellent for use when installing Roof Rack Assemblies.
M6-1.0 Anchor Set - GM Vehicles
p/n: 70-4867-46
A top-quality neoprene rubber Well Nut, Washer and Screw Anchor for GM vehicle models. Well nut has a metric M6-1.0 captive brass nut. Overall length is 21/32". Replaces GM factory number #20130258.
Roof Rack Assembly Well Nut w/Screw, 1/4"-20
p/n: 70-4868-46
This neoprene rubber Well Nut with Screw has a 1/4-20 captive brass nut. Excellent for use when installing Roof Rack Assemblies.
Standard rubber washer
p/n: 60-0726-45
Washer, for attaching moldings, emblems, and fender guards as required on body.