Front Fender Pads
p/n: 20-1866-45
This Front Fender Pad pair is designed from the original part for superior fitment and seal. These weatherstrip pads fit at the top rear of the front fender to cowl panel.
Front Fender to Apron Seal
p/n: 20-2504-45
This Front Fender to Apron Seal installs on the fender to inner apron. Excellent for when assembling front sheet metal. Sold as a fifteen (15) foot roll.
Front Fender To Cowl Seals
p/n: 20-1099-45
This Front Fender To Cowl Seal pair is designed from the original part for superior fitment and seal. These filler strips fit at the rear of the front fender to the cowl side panels.
Front Frame Splash / Dust Shield Fillers
p/n: 70-3688-45
This two (2) piece Front Frame Splash / Dust Shield Filler pair is designed from the original part for superior fitment and function. Filler pieces are die cut from quality masticated rubber to authentic original dimensions. Left and Right rubber pieces attach to the vehicles front frame.
Glovebox and License Plate Bumper
p/n: 20-2889-45
Bumpers, glovebox and/or license plate. Used as glove box door bumpers for 65-66 and 71-73 models, used as license plate bumper for 65-70 models.
Gravel Shield
p/n: 70-0093-45
Rear body deflector apron or valance. Original copy including fastening bolt holes. You locate exhaust hole where needed. Approximately fifty eight (58) inches long.
Hydraulic Window Lift Grommet
p/n: 70-0642-21
Grommet, window lift hydraulic line through floor panel. Single hole type (for two (2) hole type, see our #70-0643-21).Length: 1.5 inches. Width: 1.
Hydraulic Window Lift Grommet
p/n: 70-0643-21
Grommet, window lift hydraulic lines through floor panel, 2-hole style (for cars requiring single-hole style, see our #70-0642-21).Length: 1.5 inches.
Inner Fender Splash / Dust Shield Set
p/n: 70-4669-45
This four (4) piece Inner Fender Splash / Dust Shield Set is designed from the original part for superior fitment and seal. Inner Fender pieces are die-cut from quality masticated rubber to authentic original dimensions. These pieces fit to the inner front fenders.
Inner Fender Splash Apron / Dust Shield Set
p/n: 70-4627-45
This twenty-two (22) piece Inner Fender Splash Apron / Dust Shield set is designed from the original part for superior fitment, function and sealing. Filler pieces are die cut from quality masticated rubber to authentic original dimensions.
Insulator
p/n: 30-0404-48
Insulator, used on various places on vehicle. Uses 10 to 14 per car running board to frame bracket. Replaces factory #324851.
Lock Pillar Water Deflector
p/n: 70-3635-62
Door panel water deflector, at lock. Fully molded for both left and right hand sides.
M6-1.0 Anchor Set - GM Vehicles
p/n: 70-4867-46
A top-quality neoprene rubber Well Nut, Washer and Screw Anchor for GM vehicle models. Well nut has a metric M6-1.0 captive brass nut. Overall length is 21/32". Replaces GM factory number #20130258.
M6-1.0 Well Nuts - 2 Piece Pack
p/n: 70-4865-45
These neoprene rubber Well Nuts have a metric M6-1.0 captive brass nut. Overall length is 21/32". Packaged in a two (2) piece pack. Excellent for use in many applications.
Paint Gasket Set
p/n: 82-0224-44
This comprehensive fifteen (15) piece Paint Gasket Set includes the major seals and gaskets when painting or restoring a classic Camaro. These reproduction parts are designed from originals for superior performance, durability and a factory like fit.
Paint Gasket Set
p/n: 82-0027-44
This comprehensive nineteen (19) piece Paint Gasket Set includes the major seals and gaskets when painting or restoring a classic Camaro. These reproduction parts are designed from originals for superior performance, durability and a factory like fit.
Paint Gasket Set
p/n: 82-0026-44
This comprehensive nineteen (19) piece Paint Gasket Set includes the major seals and gaskets when painting or restoring a classic Camaro. These reproduction parts are designed from originals for superior performance, durability and a factory like fit.
Pickup tie down mounting pad
p/n: 20-0885-45
Pad, pickup box tie down hook. Eight (8) required per truck.
Quarter Panel At Taillight End Filler Weatherstrips
p/n: 70-4713-16
This Quarter Panel At Taillight End Filler Weatherstrip pair is designed from the original part for an authentic fit, finish, and appearance.
Quarter Panel Drain Plugs
p/n: 20-2769-45
This Quarter Panel Drain Plug pair is a quality reproduction of the original factory part. These rubber plugs fit inside the quarter panel area to seal-out weather and environmental elements.
Quarter Panel Drain Valves
p/n: 20-2770-45
These Quarter Panel Drain Valves are constructed of a durable rubber and are a direct-fit replacement. This product is sold as a pair.
Rear Grill to Body Seal
p/n: 70-3124-31
This Rear Grill to Body Seal is designed from the original part for superior fitment and seal. This seal mounts on the top edge of REAR grill above the rear bumper.
Rear Wheelhouse To Quarter Panel Fillers
p/n: 60-0354-45
This Rear Wheelhouse To Quarter Panel Filler pair is for the outer rear wheelhouse panel to quarter panel. Sold as a five (5) foot filler pair, one for each side.
Rocker Panel Inner Drain Cover
p/n: 70-2392-45
This Rocker Panel Inner Drain Cover pair is designed from the original part for superior fitment and seal. Fully molded with proper attaching teeth and flap.
Roof Luggage Rack Pads
p/n: 70-3459-87
This Roof Luggage Rack Mounting Pad set is designed from the original part for superior fitment and seal. A five (5) piece set for Station Wagon models with an OEM factory roof top luggage rack.
Roof Rack Assembly Well Nut w/Screw, 1/4"-20
p/n: 70-4868-46
This neoprene rubber Well Nut with Screw has a 1/4-20 captive brass nut. Excellent for use when installing Roof Rack Assemblies.
Roof Tack Strip Insert
p/n: 20-2032-45
This Roof Tack Strip Insert is designed from the original part for superior fitment and seal. This insert strip fits between roof insert and the body of the vehicle. Closed Cars Only
Roof Top Insert - Coupe
p/n: 20-2028-45
A Roof Top Insert Weatherstrip for closed roof coupe cars. Fits the groove between cloth top center panel and steel surround.
Roof Top Insert - Sedan Delivery
p/n: 20-2030-45
A Roof Top Insert Weatherstrip for sedan delivery models. Fits the groove between cloth top center panel and steel surround.
Roof Top Insert Weatherstrip
p/n: 20-0102-45
A Roof Top Insert Weatherstrip for closed cars without turret top. Fits the groove between cloth top center panel and steel surround. Available by the foot.
Roof Top Insert Weatherstrip - Sedan
p/n: 20-2029-45
A Roof Top Insert Weatherstrip for closed roof sedan cars. Fits the groove between cloth top center panel and steel surround.
Rumble Seat Step Mounting Pad
p/n: 70-0043-44
Pad, rumble seat step mounting for fender, double beaded edge per original. Width: 4.375 inches.
Rumble Seat Step Pad
p/n: 60-0126-45
Pad, rumble seat step, on rear bumper bracket or fender. Rubber cover only, full slip-over type with bowtie emblem.
Rumble Seat Step Pad
p/n: 20-2031-45
This Rumble Seat Step rubber pad is designed from the original part for superior fitment and seal. This step pad fits on the vehicle rear fender to provide a step into the rumble seat.
Rumble Seat Step Pad
p/n: 60-0501-45
Step pad, rumble seat, on rear fender, with bowtie emblem. Steel core with bolt.Width: 4.375 inches. Height: 5.25 inches.
Running Board Edge Seal
p/n: 70-0358-45
Seal strip, running board to body lower edge, exact copy. Top quality, each strip six (6) foot long. Length: 72.0 inches. Height: .5625 inches.