Fender & Fender Skirt Edging

Page 1 of 2 ( 117 items )

Fender dust seal

p/n: 70-0376-45

Dust seals, rear fender at rear door, right and left.

$249.79/pr.

Made to Order Takes 5-7 Days

Rumble Seat Step Pad

p/n: 40-0412-44

Step pad, rumble seat upper, with "P" logo. Fully molded with core and mounting stud.Height: .625 inches.

$200.59/ea.

Made to Order Takes 5-7 Days

Rumble Seat Step Pad

p/n: 25-0018-44

Step, rumble seat fender with molded-in studs. Length: 6.375 inches.

$180.99/ea.

Made to Order Takes 5-7 Days

Body to Fender Seal

p/n: 60-0001-45

This Body to Fender Seal pair installs on the right and left of the front body to fender. Length: 22.0 inches.

$169.59/pr.

Made to Order Takes 5-7 Days

Front Fender Cushion Strip

p/n: 16-0003-44

Cushion strip, front fender to running board, close reproduction. Length: 17.75 inches.

$152.29/pr.

Made to Order Takes 5-7 Days

Front Apron Crossbar Grommets

p/n: 70-1131-45

This Front Apron Crossbar Grommet pair is designed from the original part for superior fitment, finish and function. Width: 3-1/2" inches. Height: 3-1/2" inches.

$141.49/pr.

In Stock

Front Apron Crossbar Grommet

p/n: 70-1130-45

Grommets, front splash apron crossbar.Width: 3.5 inches. Height: 3.6875 inches.

$139.69/pr.

Made to Order Takes 5-7 Days

Running Board Edge Seal

p/n: 20-0482-45

Seal, running board to rear quarter panel special.

$133.89/pr.

Ships in 2-3 Weeks

Front Fender Seal

p/n: 30-0189-44

Liners, front fender to running board. Reversible right and left like original. Length: 15.0 inches.

$131.69/pr.

Made to Order Takes 5-7 Days

Crown Molding Mounting Pad

p/n: 50-0244-44

Mounting pads, rear fender crown molding. Requires two (2) per car.Length: 40.625 inches.

$131.69/pr.

Made to Order Takes 5-7 Days

Fender to Radiator Seal

p/n: 40-0085-44

This Fender to Radiator Seal is molded out of EPDM rubber Overall length is 11.25 inches.

$131.19/pr.

Made to Order Takes 5-7 Days

Front Fender Seal

p/n: 30-0264-44

Liner, front fender to running board. Reversible right and left replacement. Length: 15.50 inches.

$127.79/pr.

Made to Order Takes 5-7 Days

Front Apron Crossbar Grommet

p/n: 30-0040-44

Grommets, front apron crossbar. Molded left and right just like original.Length: 3.625 inches. Width: 3.625 inches.

$118.49/pr.

Made to Order Takes 5-7 Days

Rumble Seat Step Pad

p/n: 40-0124-44

Pad, rumble seat step, with "Dodge" logo, slip over type to fit old steel core. Perfect detail and lettering.Height: .50 inches.

$116.19/ea.

Made to Order Takes 5-7 Days

Trunk Rack Mounting Pad

p/n: 40-0325-44

Grommet (mounting pad), rear, trunk rack to apron.

$112.69/pr.

Made to Order Takes 5-7 Days

Rumble Seat Step Pad

p/n: 40-0012-44

Pad, rumble seat step bears Chrysler medallion logo in center.Height: .50 inches.

$106.49/ea.

Made to Order Takes 5-7 Days

Fender Skirt Edge Seals

p/n: 70-0897-44

Fender Skirt Edge Seal pair. Length: 60.0 inches. Width: 5/8 inches.

$105.59/pr.

In Stock

Fender Welting with 3/16" Bead - 50ft

p/n: 70-1100-44

A superior quality Fender Welting material constructed of reinforced black vinyl over a vinyl core. Typically used for attaching four (4) fenders to body. Sold in a 50 foot roll.

$104.99/ea.

In Stock

Welting, fender, bright chrome vinyl, three sixteenths (3/16) inch bead, one and one half (1-1/2) inch width. Superior quality. Fifty (50) foot roll. Typically used to attach four (4) fenders to body. For twenty five (25) foot roll see #70-1101-44.

$104.99/ea.

In Stock

Fender Welting 1/4" Bead - 50ft.

p/n: 70-1098-44

Fender Welting is typically used to attach four (4) fenders to body. A superior quality, proper construction of reinforced black vinyl over vinyl core. Measures one and three eighths (1-3/8) inch wide. Fifty (50') foot roll of one-fourth (1/4) inch bead.

$104.99/ea.

In Stock

Fender Skirt Edge Weatherstrip

p/n: 70-0790-44

This Fender Skirt Edge Weatherstrip pair is designed from the original part for superior fitment, finish, and seal. This weatherstrips fits between the rear wheel fender skirt and the rear fender quarter panel.

$103.59/pr.

Made to Order Takes 5-7 Days

Fender Skirt Edge Weatherstrips

p/n: 70-0055-45

This Fender Skirt Edge Weatherstrip pair is designed from the original part for superior fitment, finish and sealing function. Two five (5) foot strips that fit between the rear wheel fender skirt and rear quarter panel.

$98.89/pr.

Made to Order Takes 5-7 Days

Fender Skirt Edge Weatherstrip

p/n: 25-0092-44

$95.99/pr.

Made to Order Takes 5-7 Days

Rumble Seat Step Pad

p/n: 40-0353-44

Pad, rumble seat step, with "DS" logo. Fits old bracket and bezel. See our #40-0055-44 also.Height: .50 inches.

$95.69/ea.

Made to Order Takes 5-7 Days

Front Fender Seal

p/n: 30-0246-44

Liner, front fender to radiator shell.Length: 6.50 inches.

$95.69/pr.

Made to Order Takes 5-7 Days

Shoe Scraper Mounting Pad

p/n: 60-0325-45

Pad, mounting, boot scraper-to-front fender, right and left.Width: 3.25 inches.

$93.69/pr.

In Stock

Rumble Seat Step Pad

p/n: 40-0209-44

Pad, rumble seat step slip over style for original core, "DB" logo.

$93.69/ea.

Made to Order Takes 5-7 Days

Fender Skirt Edge Weatherstrip

p/n: 70-0154-45

$93.39/pr.

In Stock

Fender Skirt Edge Weatherstrip

p/n: 25-0102-44

$92.49/pr.

In Stock

Fender Skirt Edge Weatherstrip

p/n: 70-0289-45

$92.49/ea.

In Stock

Rumble Seat Step Pad

p/n: 40-0055-44

Pad, rumble seat step, with "DeSoto" logo, full slipover type to fit old carcass and outer trim ring. See also our #40-0353-44.Height: .50 inches.

$92.29/ea.

Made to Order Takes 5-7 Days

Fender Skirt Edge Weatherstrip

p/n: 70-2557-45

$88.99/pr.

In Stock

Fender Skirt Edge Weatherstrip

p/n: 70-1606-44

$87.79/pr.

Made to Order Takes 5-7 Days

Access Hole Plug

p/n: 10-0010-44

Cover, rear apron over fuel tank. 3-1/2 inch diameter hollow cup to cover hole above fuel gauge sending unit.

$85.99/ea.

Made to Order Takes 5-7 Days

Fender Skirt Edge Weatherstrip

p/n: 20-0111-44

$85.79/pr.

In Stock

Fender Skirt Edge Weatherstrip

p/n: 40-0279-44

$84.99/ea.

In Stock

Fender Skirt Edge Weatherstrip

p/n: 60-0298-45

$84.99/pr.

Made to Order Takes 5-7 Days

Rumble Seat Step Pad

p/n: 30-0170-44

Pads, rumble seat step.

$83.49/pr.

Made to Order Takes 5-7 Days

Fender Skirt Edge Weatherstrip

p/n: 25-0096-44

$83.29/pr.

Made to Order Takes 5-7 Days

Fender Skirt Edge Weatherstrip

p/n: 70-1281-44

$81.89/pr.

In Stock

Fender to Radiator Seal

p/n: 40-0066-44

This Fender to Radiator Seal is designed from original parts so it fits correctly. Sold as a eight and seven-sixteenths (8-7/16) inch pair.

$81.89/pr.

Made to Order Takes 5-7 Days

Front Fender Seal

p/n: 25-0035-44

Seal, front fender to rocker panel.Length: 3.875 inches.

$81.19/pr.

In Stock

Fender Skirt Edge Weatherstrip

p/n: 70-1280-44

$78.69/pr.

Made to Order Takes 5-7 Days

Rumble Seat Step Pad

p/n: 40-0050-44

Pad, rumble seat step, with "P" logo, fully detailed slipover pad for old core. Fits original trim ring.Height: .50 inches.

$77.89/ea.

Made to Order Takes 5-7 Days

Fender Skirt Edge Weatherstrip

p/n: 70-0992-44

$77.59/pr.

In Stock

Front Fender Seal

p/n: 30-0430-44

Seal, Front fender to running board. Length: 13.0 inches.

$76.89/pr.

Made to Order Takes 5-7 Days

Front Fender Seals

p/n: 60-0522-45

Seal, front fender baffle, right and left. One (1) pair per car. Length: 5-1/4" inches.

$75.99/pr.

In Stock

Door - Gravel Shield - Running Board Weatherstrip

p/n: 60-0054-73

This Door - Gravel Shield - Running Board Weatherstrip is a anti-squeak bulb type extrusion with fitment for General Motors vehicles. A twelve (12) foot strip made of high-quality EPDM dense rubber and designed from original parts for superior fitment, finish and function.

$75.99/ea.

In Stock

Fender Skirt Edge Weatherstrip

p/n: 40-0476-44

$73.59/pr.

In Stock

License Plate Mounting Pad

p/n: 40-0119-44

Pad, license plate bracket to body, plain type as original.Length: 5.0625 inches. Width: 4.875 inches.

$72.59/ea.

Made to Order Takes 5-7 Days

Rumble Seat Step Mounting Pad

p/n: 70-0262-45

Pad, rumble seat step plate mounting, rectangle type for top of fender.Length: 4.875 inches. Width: 4.25 inches.

$69.99/ea.

Made to Order Takes 5-7 Days

Rumble Seat Step Pad

p/n: 27-0005-44

Pad, rear bumper step, rubber only. Fits old metal core.Height: .8125 inches.

$69.89/ea.

Made to Order Takes 5-7 Days

Front Fender Center Pad

p/n: 30-0237-44

Pad, separator, front fender center joint. Correct shape and form.Length: 3.0 inches. Width: 3.0 inches.

$69.59/ea.

Made to Order Takes 5-7 Days

Fender Skirt Edge Weatherstrip

p/n: 20-3017-44

$67.99/pr.

Ships in 2-3 Weeks

Rumble Seat Step Mounting Pad

p/n: 30-0271-44

Gasket, rumble seat step center. Length: 5.875 inches.

$67.99/ea.

Made to Order Takes 5-7 Days

Gravel Shield

p/n: 60-0539-30

Seal, rear gravel shield or deflector to bumper face bar.

$67.99/ea.

Made to Order Takes 5-7 Days

Running Board or Inner Fender Splash Filler

p/n: 60-0288-45

This eight (8) foot Splash Filler strip is used for the running board apron to body or fender splash panels anti-rattle filler. This filler strip is top-quality EPDM sponge rubber to accept rivets or retaining screws.

$66.99/ea.

In Stock

Chrome Fender Welting - 25ft

p/n: 70-1101-44

Welting, fender, bright chrome vinyl, three sixteenths (3/16) inch bead, one and one half (1-1/2) inch width. Superior quality. Twenty five (25) foot roll. Typically used to attach two (2) fenders to body. For fifty (50) foot roll see our #70-1102-44.

$64.19/ea.

In Stock

Fender Welting 1/4" Bead - 25ft.

p/n: 70-1097-44

Fender Welting is typically used to attach two (2) fenders to body. A superior quality, proper construction of reinforced black vinyl over vinyl core. Measures one and three eighths (1-3/8) inch wide. Twenty-five (25') foot roll of one-fourth (1/4") inch bead.

$64.19/ea.

In Stock

Rumble Seat Step Mounting Pad

p/n: 30-0272-44

Gasket, rumble seat step. For left hand drive upper. Length: 5.0 inches.

$63.79/ea.

Made to Order Takes 5-7 Days

Rumble Seat Step Mounting Pad

p/n: 70-0043-44

Pad, rumble seat step mounting for fender, double beaded edge per original. Width: 4.375 inches.

$63.69/ea.

Made to Order Takes 5-7 Days

Fender Skirt Edge Weatherstrips

p/n: 20-3018-44

$63.69/pr.

Ships in 2-3 Weeks

Fender Skirt Edge Weatherstrip

p/n: 60-0109-45

$63.49/ea.

In Stock

Rumble Seat Step Pad

p/n: 70-0146-45

Pad, rumble seat step, later type. Width: 4.75 inches.

$62.99/ea.

Made to Order Takes 5-7 Days

Fender Welting with 3/16 Bead - 25ft.

p/n: 70-1099-44

A superior quality Fender Welting material constructed of reinforced black vinyl over a vinyl core. Typically used for attaching two (2) fenders to body. Sold in a twenty-five (25') foot roll.

$61.49/ea.

In Stock

Rumble Seat Step Mounting Pad

p/n: 30-0181-44

Pad, rumble seat step bracket to fender. Four and one fourth (4-1/4) inch long.Length: 4.375 inches.

$61.49/ea.

In Stock

Rumble Seat Step Mounting Pad

p/n: 50-0108-44

Mounting pad, rumble seat step. Width: 4.8125 inches.

$60.89/ea.

Made to Order Takes 5-7 Days

Fender Skirt Edge Weatherstrip

p/n: 60-0201-45

This Fender Skirt Edge Weatherstrip pair is designed from the original part for superior fitment and seal. This weatherstrips fits between the removable fender skirt and the rear fender quarter panel.

$58.99/pr.

In Stock

Rumble Seat Step Mounting Pad

p/n: 50-0182-44

Mounting pad, rumble seat step to fender, proper beaded edge, exact copy.Width: 4.8125 inches.

$57.99/ea.

Made to Order Takes 5-7 Days

Rumble Seat Step Mounting Pad

p/n: 25-0019-44

Mounting pad for our #25-0018-44 fender step. Length: 7.375 inches.

$56.69/ea.

Made to Order Takes 5-7 Days

Body / Cowl to Fender Seals

p/n: 70-2787-43

This Body / Cowl to Fender Seals pair is designed from the original part for superior fitment and function. Filler seal pieces are die cut from quality masticated rubber to authentic original dimensions.

$53.99/pr.

In Stock

Body / Cowl To Fender Seals

p/n: 20-0222-44

This Body / Cowl to Fender Seals pair is designed from the original part for superior fitment and function. These filler pieces are die cut from quality masticated rubber to authentic original dimensions.

$53.99/pr.

Ships in 5-7 Days

Cowl to Fender Seal

p/n: 20-0225-44

Seals, cowl side panel to fender. Includes fasteners.

$53.99/pr.

Ships in 2-3 Weeks

Cowl to Fender Seal

p/n: 20-0218-44

Seals, cowl side panel to fender. Includes fasteners.

$53.99/pr.

Ships in 2-3 Weeks

Cowl to Fender Seal

p/n: 20-0220-44

Seals, cowl side panel to fender. Includes fasteners.

$53.99/pr.

Ships in 2-3 Weeks

Cowl to Fender Seal

p/n: 20-0229-44

Seals, cowl side panel to fender. Includes fasteners.

$53.99/pr.

Ships in 2-3 Weeks

Fender Skirt Edge Weatherstrip

p/n: 20-1316-44

This Fender Skirt Edge Weatherstrip pair is designed from original for superior fitment, finish, and seal. This weatherstrips fits between the rear wheel fender skirt and the rear fender quarter panel.

$52.49/pr.

Ships in 2-3 Weeks

Fender Welting

p/n: 20-1590-44

This black Fender Welting is designed from the original part for superior fitment and seal. This welting material fits between the fenders and the vehicle body. Thirty (30) foot roll.

$50.59/ea.

In Stock

Cowl to fender seal

p/n: 20-0361-44

Seals, back of front fender to cowl.

$49.49/pr.

Ships in 2-3 Weeks

Front Fender Seal

p/n: 20-3010-44

This Front Fender Seal installs between the splash apron to fender and the rear of the splash apron to body. Sold as a one hundred forty (140) inch strip.

$47.99/ea.

Ships in 2-3 Weeks

Fender Skirt Edge Weatherstrip

p/n: 20-1317-44

$44.39/pr.

Ships in 2-3 Weeks

Cowl to fender seal

p/n: 20-1098-45

Seals, rear of front fender to cowl upper.

$44.39/pr.

Ships in 2-3 Weeks

Fender Skirt Edge Weatherstrips

p/n: 20-0061-44

This Fender Skirt Edge Weatherstrip pair is designed from the original part for superior fitment and seal. This weatherstrip fits between the rear quarter panel wheel opening and the fender skirt.

$44.39/pr.

Ships in 1-3 Weeks

Front Fender To Cowl Seals

p/n: 20-1099-45

This Front Fender To Cowl Seal pair is designed from the original part for superior fitment and seal. These filler strips fit at the rear of the front fender to the cowl side panels.

$44.39/pr.

Ships in 2-3 Weeks

Fender Skirt Weatherstrip

p/n: 20-0069-44

This Fender Skirt Weatherstrip pair is designed from the original part for superior fitment and seal. This Left and Right edge weatherstrip fits between the rear fender bodywork and the removable fender skirt.

$44.39/pr.

Ships in 2-4 Weeks

Bumper To Inner Fender Seals

p/n: 70-2781-45

This Bumper To Inner Fender Seal pair is designed from the original part for superior fitment and function. Filler shield pieces are die cut from quality masticated rubber to authentic original dimensions.

$41.99/pr.

In Stock

Cowl to Fender Seal

p/n: 20-0540-45

Seal, back to front fender to cowl.

$41.29/pr.

Ships in 2-3 Weeks

Cowl to Fender Seal

p/n: 20-0443-45

Seal, front fender to cowl. Soft pliable sponge rubber designed to accurately fill the gaps between the back side of the fender and cowl. May be supplied as single strip that customer will have to cut in order to facilitate installation.

$41.29/pr.

Ships in 2-3 Weeks

Front Fender Vertical Filler

p/n: 60-0438-45

This Front Fender Vertical Filler pair is designed from the original part for an authentic fit and function. The vertical fill piece between the front fender to cab at rear of fender (cowl). Two (2) piece set for both sides of cab.

$40.99/set

Made to Order Takes 5-7 Days

Body / Cowl to Fender Seals

p/n: 70-2794-43

$39.59/pr.

In Stock

Firewall to Fender Dust Shield Seals

p/n: 70-3491-45

This two (2) piece Firewall To Fender Dust Shield seal pair is designed from the original part for superior fitment and seal. Fender seals attach to firewall sides to seal the space between the firewall and the inside of the front fenders.

$38.19/pr.

In Stock

Fender Skirt Edge Weatherstrip

p/n: 20-1862-44

This Fender Skirt Edge Weatherstrip pair is designed from the original part for superior fitment and seal. For original skirts only this seal fits between fender skirt and rear fender body.

$37.99/pr.

Ships in 2-3 Weeks

Cowl to fender seal

p/n: 20-0691-45

Seals, front fender rear to body pillar.

$37.99/pr.

Ships in 2-3 Weeks

Fender Skirt Edge Seal

p/n: 20-1863-44

This Fender Skirt Edge Seal pair is designed from the original part for superior fitment and seal. For original skirts only this seal fits between fender skirt and rear fender body.

$37.99/pr.

Ships in 2-3 Weeks

Fender Welting

p/n: 20-1591-44

This black Fender Welting is designed from the original part for superior fitment and seal. This welting material fits between the fenders and the vehicle body. Eight (8) foot length.

$35.39/ea.

In Stock