Door - Gravel Shield - Running Board Weatherstrip
p/n: 60-0054-73
This Door - Gravel Shield - Running Board Weatherstrip is a anti-squeak bulb type extrusion with fitment for General Motors vehicles. A twelve (12) foot strip made of high-quality EPDM dense rubber and designed from original parts for superior fitment, finish and function.
Door opening step grommet
p/n: 40-0125-49
Grommet, door sill mat retainer at lower door opening. All sill plates with metal stud retainer. (Included in our #40-0542-49 set).
Door opening step pad
p/n: 40-0541-49
Mats, door sill opening, on body. Clip type. For stud-type see our #40-0542-49) mat includes retaining grommets (40-0125-49).
Door Opening Step Pad
p/n: 60-0418-45
This Door Opening step pad is manufactured with metal backing as original. A two (2) piece set for 2-Door Fleetline Aerosedan, Style 1007 ONLY.
Door opening step pad
p/n: 70-0594-49
Matting, cover panel extension, fender to door, front, right and left, with brass core, as original.
Door opening step pad
p/n: 70-0593-49
Matting, cover panel extension, fender to door, rear, right and left, with brass core as original.
Door Opening Step Pad
p/n: 40-0542-49
This Door Opening Step Pad set installs on the door sill opening, on the body. Designed with the original pattern and metal core.
Door opening step pad
p/n: 40-0389-49
Mats, door sill opening, on body. Made without metal core (copied from authentic rubber only original). Molded-in carrot retainers.
Door opening step pad
p/n: 70-2623-49
Mat, door opening, on body. Rear doors. For front doors see our #70-2622-49. Excellent craftsmanship with authentic metal core with studs like original.
Door opening step pad
p/n: 70-2622-49
Mat, door opening, on body. Front doors. For rear doors see our #70-2623-49. Excellent craftsmanship with authentic metal core with studs like original.
Door Opening Step Pad Mats
p/n: 60-0409-45
This Door Opening Step Pad Mat pair is designed from the original part for an authentic fit, finish, and appearance. Made using high quality rubber with metal backings as OEM original.
Door Opening Threshold Pad
p/n: 70-2517-49
Mat pair for door sill threshold opening, on body. Made with authentic appearance and constructed of long lasting rubber like original. Perfect replica of factory #1433321, however it should work fine as a replacement of #1497247, 1433281, and 1803065.
Fender Skirt Edge Weatherstrip
p/n: 60-0298-45
This Fender Skirt Edge Weatherstrip pair is designed from the original part for superior fitment, finish, and seal. This weatherstrips fits between the rear wheel fender skirt and the rear fender quarter panel.
Front Door Opening Step Pad Mats
p/n: 70-1118-45
This Front Door Opening Step Pad Mat pair is designed from the original part for an authentic fit, finish, and appearance. Made using high quality rubber with metal backings as OEM original.
LaSalle Monogram
p/n: 70-0056-49
LaSalle monograms for center of running board matting, exact copy, to be in-laid.
Rear Door Opening Step Pad Mats
p/n: 70-1119-45
This Rear Door Opening Step Pad Mat pair is designed from the original part for an authentic fit, finish, and appearance. Made using high quality rubber with metal backings as OEM original.
Rumble Seat Step Mounting Pad
p/n: 25-0019-44
Mounting pad for our #25-0018-44 fender step. Length: 7.375 inches.
Rumble Seat Step Pad
p/n: 20-2031-45
This Rumble Seat Step rubber pad is designed from the original part for superior fitment and seal. This step pad fits on the vehicle rear fender to provide a step into the rumble seat.
Rumble Seat Step Pad
p/n: 60-0501-45
Step pad, rumble seat, on rear fender, with bowtie emblem. Steel core with bolt.Width: 4.375 inches. Height: 5.25 inches.
Rumble Seat Step Pad
p/n: 40-0209-44
Pad, rumble seat step slip over style for original core, "DB" logo.
Rumble Seat Step Pad
p/n: 25-0018-44
Step, rumble seat fender with molded-in studs. Length: 6.375 inches.
Rumble Seat Step Pad
p/n: 40-0412-44
Step pad, rumble seat upper, with "P" logo. Fully molded with core and mounting stud.Height: .625 inches.
Rumble Seat Step Pad
p/n: 40-0353-44
Pad, rumble seat step, with "DS" logo. Fits old bracket and bezel. See our #40-0055-44 also.Height: .50 inches.
Rumble Seat Step Pad
p/n: 27-0005-44
Pad, rear bumper step, rubber only. Fits old metal core.Height: .8125 inches.
Rumble Seat Step Pad
p/n: 40-0413-44
Step pad, rumbleseat, upper, with Chrysler medallion logo. Fully molded with core and mounting stud.Height: .625 inches.
Rumble Seat Step Pad
p/n: 40-0124-44
Pad, rumble seat step, with "Dodge" logo, slip over type to fit old steel core. Perfect detail and lettering.Height: .50 inches.
Rumble Seat Step Pad
p/n: 40-0055-44
Pad, rumble seat step, with "DeSoto" logo, full slipover type to fit old carcass and outer trim ring. See also our #40-0353-44.Height: .50 inches.
Rumble Seat Step Pad
p/n: 40-0012-44
Pad, rumble seat step bears Chrysler medallion logo in center.Height: .50 inches.
Rumble Seat Step Pad
p/n: 40-0050-44
Pad, rumble seat step, with "P" logo, fully detailed slipover pad for old core. Fits original trim ring.Height: .50 inches.
Rumble Seat Step Pad
p/n: 11-0012-87
Cover, rumble seat step pad, slipover type, excellent copy.Width: 5.0 inches. Height: 5.0 inches.
Rumble Seat Step Pad
p/n: 60-0126-45
Pad, rumble seat step, on rear bumper bracket or fender. Rubber cover only, full slip-over type with bowtie emblem.
Running Board Center Strip
p/n: 30-0034-49
Running board center strip. Fits original metal retainer. Authentic reproduction with correct detail.
Running Board Covers
p/n: 20-2200-49
This Running Board Cover matting is designed from the original part for superior fitment and seal. This cover pair is pre-molded and manufactured from top quality rubber.
Running Board Door Opening Step Pads
p/n: 30-0216-49
This Running Board Door Opening Step Pad pair is designed from the original part for superior fitment and seal. Provides a perfect copy of the original accessory.
Running Board Edge Seal
p/n: 70-0358-45
Seal strip, running board to body lower edge, exact copy. Top quality, each strip six (6) foot long. Length: 72.0 inches. Height: .5625 inches.
Running Board Edge Seal
p/n: 30-0169-44
Liner, running board to body, (side apron to body seal). Set consists of two (2) pieces seven (7) foot long. One (1) inch width is after fold over.
Running Board Matting
p/n: 30-0218-49
Running board matting for Model 115C only. Made from the molded running board matting for the 120's (our #30-0214-49).
Running Board Matting
p/n: 50-0146-49
Matting, running board, original pattern with material to come down over ends and sides.
Running Board Matting
p/n: 40-0260-49
Running board Matting. Fully molded with all original details. No splicing required. Metal backing or metal trim not included.
Running Board Matting
p/n: 30-0428-49
This reproduction Running Board Matting pair is designed from the original part for superior fitment, finish and function. Fully molded with crowned blocks. Top quality rubber, flawless detail. No splicing or butting required.
Running Board Matting
p/n: 40-0150-49
Running board matting. Fully molded, fine detail. Incorporates embossed underside to fit metal bead around edge of original running board steel.
Running Board Matting
p/n: 40-0293-49
Running board Matting. Fully molded with all original details. Includes integral flaps of rubber on 3 sides to cushion fenders and splash apron. No splicing or butting required.
Running Board Matting
p/n: 30-0214-49
Running board matting. Fully molded right and left hand. Top quality rubber, flawless detail. Includes rubber cross molding for in front of rear fender.
Running Board Matting
p/n: 30-0449-49
This Running Board Matting is designed from the original part for superior fitment and a factory like appearance. Made from short wheel-base matting with extension pieces to make the full length cover.
Running Board Matting
p/n: 40-0212-49
This Running Board Matting is designed from the original part for superior fitment and a factory like appearance. This four (4) piece set consists of one (1) pair of our #40-0151-49 mats plus two (2) extension pieces to give correct fit for the longer Model CT model running boards.
Running Board Matting
p/n: 11-0003-49
Edge panel, running board. Exact copy including 1/4 inch mounting studs. A perfect replica in highest quality material. 43-1/2 inch long.
Running Board Matting
p/n: 70-0420-49
Running board matting. Fully molded rubber strips with full length steel cores molded in.
Running Board Matting
p/n: 40-0292-49
Running board Matting. Fully molded with all original details. Includes integral flaps of rubber on 3 sides to cushion fenders and splash apron.
Running Board Matting
p/n: 40-0151-49
This Running Board Matting is designed from the original part for superior fitment and a factory like appearance. Fully molded with all original details including underside clearance for embossed running board for a perfect fit.
Running Board Matting Cover
p/n: 20-1601-49
This Running Board Matting Cover pair is designed from the original part for an authentic fit and finish.
Running Board Matting Cover
p/n: 20-1602-49
This Running Board Matting Cover pair is designed from the original part for an authentic fit and finish.
Running Board Mounting Pad
p/n: 30-0405-48
Insulator, washer, running board to frame bracket bolt, lower. Ten (10) to fourteen (14) required per car.
Running Board Mounting Pad
p/n: 20-1603-49
Grommets, running board to frame and front fender to cowl. Rubber grommets and metal washers. Twenty four (24) piece set.
Running Board or Inner Fender Splash Filler
p/n: 60-0288-45
This eight (8) foot Splash Filler strip is used for the running board apron to body or fender splash panels anti-rattle filler. This filler strip is top-quality EPDM sponge rubber to accept rivets or retaining screws.
Running Board To Body Filler
p/n: 70-1116-45
This Running Board To Body Filler is extruded from dense rubber for a durable and proper seal. Sold as a forty (40") inch pair of filler strips.
Running Board Trim Strips
p/n: 30-0396-49
This Running Board Trim Strip set is designed from the original part for superior fitment, finish and function. Manufactured with quality stainless steel and with retaining clips.
Running Board Trim Strips
p/n: 30-0450-49
This Running Board Trim Strip set is designed from the original part for superior fitment and a factory like appearance. Trim strips are made from high quality stainless steel and this set includes retaining clips (not sold separately). For 148" Wheel Base models.