Steering Column Floorplate
p/n: 10-0165-36
Grommet, steering column floor seal. One and one half (1-1/2) inch inside diameter, two and one half (2-1/2) inch outside diameter.
Steering Column Grommet
p/n: 60-0102-36
Grommet, steering column at floor (column shift). Black rubber. For brown see our #60-0102-89.
Steering Column Finish Strip
p/n: 70-1707-88
Seal, steering column to instrument panel. Extruded rubber strip thirteen (13) inch to exact cross-section.Length: 13.0 inches. Width: .625 inches.
Steering Column Finish Strip
p/n: 70-1031-88
Seal, steering column to instrument panel. Extruded rubber twelve (12) inch strip to exact cross-section.Length: 10.5 inches. Width: .50 inches.
Fastback Quarter Window Lower Pivot Covers
p/n: 20-2787-62
These Fastback Quarter Window Lower Pivot Cover are designed from the original part for superior fitment, finish and function. The cover pair installs on pivot rod at fiberglass interior panel.
Steering Column Finish Strip
p/n: 70-0199-88
Finish seal strip, steering column to dash pan panel, in tan rubber per original, close copy.Width: .3125 inches. Height: .3125 inches.
Engine Top Cover Weatherstrip
p/n: 70-4750-88
This Engine Top Cover Gasket is an original design reproduction made from top quality sponge rubber. This gasket attaches between the removable engine cover ("doghouse") and the vehicle firewall / floorboard.
Ulta-Mat Quarter Panel Heat and Sound Underlayment
p/n: 70-4784-88
This Ulta-Mat Quarter Panel Heat and Sound Underlayment pair is pre-cut for a direct-fit installation. Underlayment pieces are made from a flexible and lightweight foil facing foam rubber sound and heat insulation material.
Gearshift Boot - Brown
p/n: 20-2166-26
This Gearshift Boot is designed from the original part for superior fitment and seal. This boot fits over the gearshift tower to make a weathertight connection for the transmission gearshift rod as it passes up through the vehicle floorboard.
Steering Column Tube To Floor Gasket
p/n: 20-1531-88
This Steering Column Tube To Floor Gasket is designed from the original part for superior fitment and sealing. This part fits around the steering column to seal the column tube through the body floor pan.
T-Top Headliner Retainer
p/n: 70-4652-88
This T-Top Headliner Retainer is designed from the original part for superior fitment, finish and function. This retainer strip pinches the headliner to the body to hold it in place. Sold Individually - Purchase two (2) to complete the driver and passenger overhead panel.
Roof emblem mounting pad
p/n: 70-2575-88
Pad, roof emblem mounting gasket. Machine die cut sponge rubber to exact required shape.
Steering Column Seal
p/n: 60-0518-36
Seal, steering column and shift column toe pan. Five eighths (5/8) inch thick sponge rubber.Width: 4.875 inches. Height: .625 inches.
Steering column seal
p/n: 60-0478-36
Seal, steering column at toe board, for steering column housing and shifter control shaft jacket. Top quality sponge rubber, accurately cut.
Engine Top Cover Weatherstrip
p/n: 70-3531-88
This Engine Top Cover Weatherstrip is an original design reproduction made from top quality sponge rubber. This gasket attaches between the removable engine cover ("doghouse") and the vehicle firewall/floorboard.
Air Vent Gasket Set
p/n: 70-4472-31
This Air Vent Gasket set is designed from original parts for superior fitment and sealing. These quality manufactured gaskets fit to seal the two (2) conditioned air assemblies for interior comfort.
Glovebox Door Check Grommet
p/n: 70-0467-88
Grommet, glovebox door check link, for one (1) inch slot in dash.
Ulta-Mat Kick Panel Heat and Sound Underlayment
p/n: 70-4782-88
This Ulta-Mat Kick Panel Heat and Sound Underlayment is pre-cut for a direct-fit installation. Underlayment pieces are made from a flexible and lightweight foil facing foam rubber sound and heat insulation material.
Inside Door Handle Gaskets
p/n: 70-4811-69
This Inside Door Handle Gasket pair is designed from the original part for an authentic fit, finish, and appearance. Slips onto edge of hole where door handle comes out of the door panel.
Steering Column Seal
p/n: 60-0419-36
Seal, steering column toe pan. One (1) required per car. Top quality sponge rubber, five eighths (5/8) inch thick.Width: 3.50 inches. Height: .625 inches.
Glovebox Door Check Grommet
p/n: 70-0285-88
Grommet, glovebox door check link, for one and one eighth (1-1/8) inches slot in dash.Length: 1.4375 inches. Width: .625 inches.
Glovebox Door Bumper Stops
p/n: 20-1698-88
Bumper stops for the glovebox door - lower. Rubber Coated Steel like original. This part prevents the glovebox door from opening too far, reduces paint-chipping.
Steering Column Grommet
p/n: 70-3158-36
This Steering Column Grommet is designed from the original part for superior fitment and seal. This seal fits around the steering column at the toe board.
Steering Column Cushion - Brown
p/n: 60-0012-89
This Steering Column Cushion grommet is designed from the original part for an authentic fit, finish, and appearance. For the steering column to cowl U-bolt clamp. Brown rubber. For Black see 60-0012-36
Steering Column Cushion
p/n: 40-0259-36
Pad, steering post bracket. One (1) per car. Cushions steering post clamp to instrument panel.Length: 3.50 inches.
Kick Panel Hole Cover
p/n: 70-4536-45
This Kick Panel Hole Cover is designed from the original part for superior fitment and function. Cover is made from high-quality EPDM 80 durometer dense rubber to provide excellent durability and service.
Brown Rear Window Shade Cap
p/n: 70-0618-88
Cap, roller end, back window curtain, brown rubber.Color:brown Width: .625 inches. Height: .4375 inches.
Steering Column Cushion - Black
p/n: 60-0012-36
This Steering Column Cushion grommet is designed from the original part for an authentic fit, finish, and appearance. For the steering column to cowl U-bolt clamp. Black rubber. For Brown see 60-0012-89.
Steering Column Floorplate
p/n: 20-3158-88
Seal, steering column to floor. Installs under floor mat.
Air Vent Duct Gaskets
p/n: 70-5013-88
This Air Vent Duct Gasket pair is designed from the original part for an authentic fit, finish and appearance. Die Cut Foam Gaskets used with steel air ducts.
Steering Column To Firewall Gasket
p/n: 70-4764-36
This Steering Column To Firewall Gasket is designed from the original part for superior fitment and sealing. Fully molded with top quality EPDM rubber to authentic original dimensions. This part fits around the steering column to seal the column through the firewall.
Steering Column Floorplate
p/n: 20-1694-88
Seal, steering column tube. Installs on top of floor mat.
Fastback Fold Down Rear Seat To Floor Stop Bumpers
p/n: 20-2884-88
This Fastback Fold Down Rear Seat To Floor Stop Bumper pair is designed from the original part for superior fitment, finish and function. Includes jamb nuts.
Steering Column Gasket
p/n: 60-0014-36
This Steering Column to Toe Board Gasket is designed from the original part for superior fitment and sealing. This part fits around the steering column to seal the column through the body floor pan.
Steering Column To Floor Seal
p/n: 20-0674-36
This Steering Column To Floor Seal is designed from the original part for superior fitment and sealing. Seal part is die cut from quality rubber to authentic original dimensions. This part fits around the steering column to seal the column through the body floor pan.
Steering Column Floorplate
p/n: 20-1782-88
Seal, steering column to floor. Installs under floor mat.
