1/4" Trunk Bumper
p/n: 33-0350-87
This 7/8" Trunk Bumper is a quality reproduction of the original factory part. Bumper fits to the rear compartment lid, lower corners on lid. Two (2) per car. Manufactured to OEM specifications to install for an authentic fit, finish, and function.
1/8" Glovebox Door Bumper
p/n: 33-0128-88
This 5/16" Glovebox Door Bumper is designed from the original part for superior fitment, finish and function. This bumper is commonly used as a glovebox door bumper on GM models.
1/8" Standard Stem Bumper - GM
p/n: 33-0127-41
This 5/16" Standard Stem Bumper is designed from the original part for superior fitment, finish and function. This bumper is commonly used as a console and fuel filler door bumper on GM models.
Air Vent Duct Gaskets
p/n: 70-5013-88
This Air Vent Duct Gasket pair is designed from the original part for an authentic fit, finish and appearance. Die Cut Foam Gaskets used with steel air ducts.
Air Vent Gasket Set
p/n: 70-4472-31
This Air Vent Gasket set is designed from original parts for superior fitment and sealing. These quality manufactured gaskets fit to seal the two (2) conditioned air assemblies for interior comfort.
Body hole plug
p/n: 20-2888-88
Plugs, seat access hole plugs. (Included in complete rubber plug kits). Eight (8) piece set.
Brake and Clutch Shank Seal
p/n: 40-0217-24
Draft cap for brake and clutch pedal.Length: 2.4375 inches. Width: 1.6875 inches.
Brown Carpet Heel Plate
p/n: 40-0190-89
Heel pad. Brown rubber. For black see our #40-0190-88. To protect driver's side floor carpet.
Brown Gearshift Boot
p/n: 40-0111-89
Boot, base of gearshift lever. Brown rubber. For black see our #40-0111-88. Made separately to fit most of our gearshift floorplates. Copied from original.
Brown Gearshift Floorplate
p/n: 40-0105-89
Floorplate, gearshift. Brown rubber. For black see our #40-0105-88. Metal core, bend as needed at assembly. See #40-0111-88 and #40-0111-89 for boot.
Brown Gearshift Floorplate
p/n: 40-0101-89
Floorplate, gearshift. Brown rubber. For black see our #40-0101-88. Made without rubber boot, but with metal core.
Brown Gearshift Floorplate
p/n: 40-0108-89
Floorplate, gearshift. Brown rubber. For black see our #40-0108-88. Perfect copy of beading. Steel core as original, but without cover boot.
Brown Rear Window Shade Cap
p/n: 70-0618-88
Cap, roller end, back window curtain, brown rubber.Color:brown Width: .625 inches. Height: .4375 inches.
Brown seat back rest pad
p/n: 70-0482-89
Rest pads, seat back, outer, on two (2) door styles with folding seats. Brown rubber. For black see our #70-0482-88. Self retaining, perfect copy.
Brown Steering Column Grommet
p/n: 60-0102-89
Grommet, steering column at floor (column shift). Brown rubber. For black see our #60-0102-36.
Brown Steering Column Grommet
p/n: 40-0078-89
Grommet, steering column to toe board. Brown rubber. For black see our #40-0078-36.Color:brown Length: 5.375 inches.
Brown Steering Column Grommet
p/n: 70-2516-89
Grommet, steering column to dash at floorboard. Brown rubber. For black see our #70-2516-36. Fully molded with correct metal core.
Brown Steering Column Grommet
p/n: 40-0144-89
Grommet, steering column to toe board. Brown rubber. For black see our #40-0144-36. Two and three fourths (2-3/4) inch by seven and one half (7-1/2) inch.
Brown Steering Column Grommet
p/n: 50-0504-89
Grommet, steering column shaft to floorboard. Brown rubber. For black see our #50-0504-36.Color:brown Length: 3.75 inches. Width: 2..
Brown Steering Column Grommet
p/n: 27-0047-89
Grommet, steering column at toe board. Brown rubber.Color:brown Length: 3.50 inches.
Brown Steering Floorplate
p/n: 50-0260-89
Retainer, front floor mat on steering column (also called steering column floorplate). Brown rubber. For black see our #50-0260-36.
Brown Steering Floorplate
p/n: 50-0350-89
Floorplate, steering column with metal core. Brown rubber. For black see our #50-0350-36. Color:brown Width: 6.5 inches.
Brown Steering Floorplate
p/n: 50-0117-89
Floorplate at steering column and pedals. Brown rubber. Metal core as original.
Brown Steering Floorplate
p/n: 50-0415-89
Floorplate, steering column. Brown rubber. For black see our #50-0415-36.Color:brown Length: 4.125 inches. Width: 4.125 inches.
Brown Steering Floorplate
p/n: 50-0565-89
Floorplate, steering column at floorboard. Brown (tan) rubber. For black see our #50-0565-36. Made with brass core.Color:brown Length: 9.
Carpet Heel Plate
p/n: 40-0087-88
Heel pad for carpet. Identical to original. Five and three fourths (5-3/4) inch by ten and one half (10-1/2) inch, to be stitched in place.Length: 10.
Carpet heel plate
p/n: 11-0009-88
Heel plate, carpet. Steel core and tabs, tread pattern matching other parts.
Carpet Heel Plate
p/n: 70-3019-88
Heel pad for carpet. Seven and three eighths (7-3/8) inch wide by sixteen (16) inches long.
Carpet Heel Plate
p/n: 70-0617-88
Heel mat, front carpet insert.Length: 13.5625 inches. Width: 9.75 inches.
Carpet Heel Plate
p/n: 40-0190-88
Heel pad. Black rubber. For brown see our #40-0190-89. To protect driver's side floor carpet.
Carpet Heel Plate
p/n: 70-0604-88
Heel mat, front carpet, driver's position.Length: 15.75 inches. Width: 6.25 inches.
Choke and Throttle Grommet
p/n: 20-2280-88
This Choke and Throttle Grommet pair is the original style grommet. The grommets are a molded rubber encased in a metal sleeve. The pair includes the mounting clips.
Choke and Throttle Rod Grommet
p/n: 20-2279-88
This Choke and Throttle Rod Grommet is used where the choke and throttle pass through the dash. Designed from the original part for superior fit and seal.
Convertible Rear Storage Compartment - Decklid Weatherstrip
p/n: 70-4138-88
This Convertible Rear Storage Compartment - Decklid Weatherstrip is designed from the original part for superior fitment and seal. The rubber weatherstrip mounts around the full perimeter of the convertible top compartment lid to restore the seal.
Dashboard anti-rattle
p/n: 20-3164-88
Seal kit, instrument cluster lens. Seals for gauges and speedometer lens.
Dashboard Anti-Rattle
p/n: 30-0025-20
Anti rattle, each end of instrument panel. Beaded edge as original, eight and one half (8-1/2) inch long. Replaces 310708 & 310709.
Detachable Center Post Pad
p/n: 70-0280-88
Pads, folding front seat rest, brass core. Also used as bumper, slat iron to compartment on convertibles.
Dimmer Switch Grommet
p/n: 40-0083-88
This Dimmer Switch Grommet is used during carpet installations in automotive restorations. Made from high-quality EPDM dense rubber to provide excellent durability. Includes a wide flange for floor dimmer switch fitments.
Door Plug
p/n: 70-4537-45
This Door Plug is designed from the original part for superior fitment and function. Plug is made from high-quality EPDM 60 durometer dense rubber to provide excellent durability and service.
Door Plugs and Kick Panel Covers Set
p/n: 90-3502-90
This ten (10) piece Door Plugs and Kick Panel Covers Set is designed from the original part for superior fitment and function. Plugs and Covers are both fully molded and made from high-quality EPDM dense rubber to provide excellent durability and service.
Engine Top Cover Weatherstrip
p/n: 70-3531-88
This Engine Top Cover Weatherstrip is an original design reproduction made from top quality sponge rubber. This gasket attaches between the removable engine cover ("doghouse") and the vehicle firewall/floorboard.
Engine Top Cover Weatherstrip
p/n: 70-4750-88
This Engine Top Cover Gasket is an original design reproduction made from top quality sponge rubber. This gasket attaches between the removable engine cover ("doghouse") and the vehicle firewall / floorboard.
Fastback Fold Down Rear Seat To Floor Stop Bumpers
p/n: 20-2884-88
This Fastback Fold Down Rear Seat To Floor Stop Bumper pair is designed from the original part for superior fitment, finish and function. Includes jamb nuts.
Fastback Quarter Window Lower Pivot Covers
p/n: 20-2787-62
These Fastback Quarter Window Lower Pivot Cover are designed from the original part for superior fitment, finish and function. The cover pair installs on pivot rod at fiberglass interior panel.
Floor Board Seals
p/n: 20-1595-88
This Floor Board Seal set contains all of the correct sealing components for the front floor boards.
Floor Plate Set, Automatic - Black
p/n: 70-1219-88
This three (3) piece Floor Plate set in Black is for Hydramatic shift models. Pedal and steering column plates are designed from the original parts for superior fitment and function. For manual shift models in black see our #70-1218-88.
Floor Plate Set, Automatic - Brown
p/n: 70-1219-89
This three (3) piece Floor Plate set in Brown is for Hydramatic shift models. Pedal and steering column plates are designed from the original parts for superior fitment and function. For manual shift models in brown see our #70-1218-89.
Floor Plate Set, Manual - Black
p/n: 70-1218-88
This three (3) piece Floor Plate set in Black is for Manual shift models. Pedal and steering column plates are designed from the original parts for superior fitment and function. For Hydramatic shift models in black see our #70-1219-88.
Floor Plate Set, Manual - Brown
p/n: 70-1218-89
This three (3) piece Floor Plate set in Brown is for Manual shift models. Pedal and steering column plates are designed from the original parts for superior fitment and function. For Hydramatic shift models in brown see our #70-1219-89.
Folding Seat Back Frame Bumper
p/n: 70-2579-88
A Folding Front Seat Frame Rest Cushion Bumper manufactured from dense rubber with a molded in metal retaining washer. Two (2) used per vehicle.
Folding seat bumper
p/n: 20-2885-88
Bumpers, fastback fold down rear seat to floor stop. Type with screws.
Folding Seat Bumper
p/n: 70-2576-88
Bumper, front seat back center arm hinge. Excellent finish and details with original style metal core. Both seat back inner corners rest on this single bumper.
Folding seat bumper
p/n: 20-2883-88
Bumpers, fastback fold down seat frame side. Four (4) piece set.
Folding seat bumper
p/n: 70-0482-88
Rest pads, seat back, outer, on two (2) door styles with folding seats. Black rubber. For brown see our #70-0482-89. Self retaining, perfect copy.
Folding Seat Bumper
p/n: 34-0004-88
Bumper, folding seat rest. Also used as hood pad. Original configuration, with fabric base and molding screw hole to fit #10-32 screw.
Fresh Air Vent Door Seals
p/n: 70-4166-88
This two (2) piece Fresh Air Vent Door Seal pair is designed from the original part for superior fitment and seal. Seal pieces are manufactured from top quality sponge rubber to original specifications.
Gearshift Boot
p/n: 40-0111-88
Boot, base of gearshift lever. Black rubber. For brown see our #40-0111-89. Made separately to fit most of our gearshift floorplates. Copied from original.
Gearshift Boot
p/n: 70-4817-26
This Gearshift Boot is designed from the original part for superior fitment and function. This boot fits over the gearshift tower to make a weathertight connection for the transmission gearshift rod as it passes up through the vehicle floorboard.
Gearshift Boot
p/n: 20-2877-88
Boot, 3-speed manual transmission lower shifter. Exact reproduction of original. Surrounds shifter housing sealing out dirt, moisture and noise.
Gearshift Boot
p/n: 20-2878-88
Boot, 4-speed manual transmission lower shifter. Exact reproduction of original. Surrounds shifter housing sealing out dirt, moisture and noise.
Gearshift Boot
p/n: 18-0017-88
Boot only, gearshift at floor, to replace boot section at original gearshift floorplate.Width: 4.50 inches.
Gearshift Boot
p/n: 40-0076-88
Dust boot, gearshift, beehive type. Excellent copy and material. Used on some shift ball sockets.Length: 4.75 inches.
Gearshift Boot - Brown
p/n: 20-2166-26
This Gearshift Boot is designed from the original part for superior fitment and seal. This boot fits over the gearshift tower to make a weathertight connection for the transmission gearshift rod as it passes up through the vehicle floorboard.
Gearshift Floorplate
p/n: 20-0464-88
Seals, transmission cover to floor. Cork and rubber. Three (3) piece set.