Bijur lubricator spring seal
p/n: 30-0434-32
Seal, spring shackle. For models with Bijur lubrication systems.
Coil spring insulator pad
p/n: 70-0801-32
Pad, coil spring insulator. Molded four (4) piece set for one (1) car.
Front Coil Spring Insulator
p/n: 20-0203-32
This Front Coil Spring Insulator is designed from the original part for superior fitment, finish, and function. This spring insulator installs to prevent metal to metal contact at the top and bottom of the coil spring mounting points.
Front coil spring pad
p/n: 70-2302-35
Pad, front coil spring insulator cushion. Fully molded, mounts at top of front coil springs.
Front coil spring pad
p/n: 50-0358-35
Insulators, front coil spring. Fabric reinforced rubber as original.
Front coil spring pad
p/n: 50-0306-35
Insulator ring, front coil spring, top and bottom. Four (4) per car.
Front Coil Spring Pad
p/n: 50-0476-35
Pad, front coil spring insulator, upper. Two (2) per car, five and one eighths (5-1/8) inch outside diameter. Height: .28125 inches.
Front Spring Bumper
p/n: 11-0021-35
Bumpers, front spring. Four (4) piece set.Height: 1.1875 inches.
Front Spring Bushings
p/n: 30-0391-32
This Front Spring Bushing pair is designed from the original part for superior fitment and function. These are the bushing assemblies for the upper and outer front wheel support. Inlox type cartridge bushing assemblies.
Front Spring Bushings
p/n: 30-0393-32
This Front Spring Bushing pair is designed from the original part for superior fitment and function. These are the bushing assemblies for the upper and outer front wheel support. Inlox type cartridge bushing assemblies.
Front spring mounting block
p/n: 11-0015-33
Shock insulator or mounting block, front spring, both ends. Four (4) piece set.
Front Spring Shackle Set
p/n: 20-0657-32
This Front Spring Shackle Set is a complete set for left and right Front Springs.
Leaf Spring Bushing and Bolt Set
p/n: 20-1836-32
This Leaf Spring Bushing and Bolt Set is for the front of the rear leaf spring. Includes Bushing, Bolt, and Self-Locking Nut.
Leaf Spring Clamp Liner Set
p/n: 20-1272-32
A six (6) piece Leaf Spring Clamp Liner Set molded with durable EPDM rubber. These liners are used on Front and / or Rear Leaf Springs on the Driver's or Passenger side.
Leaf Spring Eye and Shackle Bolt Bushing
p/n: 11-0014-32
This Leaf Spring Eye and Shackle Bolt Bushing is designed from the original part for an authentic fit, finish and function. Bushing is 1-1/2" barrel diameter with 1/2" inside diameter hole. Replaces factory / Harris #998.
Leaf Spring to Shackle Bushings
p/n: 70-3344-35
This Leaf Spring To Shackle Bushing set is designed from the original part for superior fitment and function. This bushing installs into the leaf spring eye to fit between the rear shackle to leaf spring. This is a four (4) piece set for both rear leaf springs.
Radius Arm Bushing
p/n: 20-0671-36
This Radius Arm Bushing is a quality reproduction of the original factory part. The bushing fits at the frame end of the radius rod on 4-Wheel Drive models. Requires two (2) bushings per side with four (4) total per vehicle.
Rear coil spring pad
p/n: 50-0304-35
Insulator, rear coil spring clamp bolt (upper end). Two (2) per car. Fabric reinforced rubber as original.
Rear coil spring pad
p/n: 50-0359-35
Insulators, rear coil spring. Fabric reinforced rubber as original. One (1) pair per car.
Rear Leaf Spring & Shackle Bushing
p/n: 70-0182-32
This Rear Leaf Spring Bushing is designed from the original part for superior fitment and function. Bushing is for the rear leaf spring front or rear spring to shackle. Two bushings pushed together form one complete bushing. May require eight (8) or twelve (12) each depending or vehicle model if replacing all bushings.
Rear Leaf Spring Bushings
p/n: 70-0663-32
This Rear Leaf Spring Bushing pair is designed from the original part for superior fitment and function. Busing are for the rear leaf spring front or rear spring eyes.
Rear Leaf Spring Insulator
p/n: 70-0980-32
This Rear Leaf Spring Insulator is an exact replacement for the upper and lower spring pad. Two and one half (2-1/2) inches wide, with cloth reinforcement. Four (4) used per car.
Rear Leaf Spring Mounting Center Insulator Pad
p/n: 20-2984-32
This Rear Leaf Spring Mounting Center Insulator Pad is an exact replacement of the rear spring center mount rubber insulator block that mounts below the leaf spring. Four (4) required per vehicle.
Rear Leaf Spring Mounting Center Insulator Pad
p/n: 20-2733-32
This Rear Leaf Spring Mounting Center Insulator Pad is an exact replacement of the rear spring center mount rubber insulator block that mounts below the leaf spring. Four (4) required per vehicle. Fits 2-1/2" leaf spring.
Rear Leaf Spring Shackle Assembly
p/n: 20-2731-32
This Rear Leaf Spring Shackle Assembly is for the rear of the rear leaf spring. Designed from original parts for a precise, factory fit. Two (2) sets required per car.
Rear Leaf Spring Shackle Assembly
p/n: 20-1064-32
This Rear Leaf Spring Shackle Assembly is manufactured to OEM specifications to install for an authentic fit and finish. Rear of rear spring shackle bars and bolt assembly with rubber bushings. Two (2) sets required per car.
Rear Leaf Spring Shackle Assembly
p/n: 20-1834-32
This Rear Leaf Spring Shackle Assembly is for the rear of the rear leaf spring on car models and the front of the front leaf spring on truck models. Two (2) sets needed per vehicle.
Rear Leaf Spring Shackle Assembly
p/n: 20-1066-32
This reproduction Rear Leaf Spring Shackle Assembly is complete with shackle bar plates, rubber bushings and lock nuts. For fitting the suspension leaf spring at its rear spring eye to the vehicle body. Two (2) sets required per car.
Rear Spring Anti-Squeak Pad
p/n: 20-1275-32
This Rear Spring Anti-Squeak Pad is used as a spring insert silencer. This leaf spring insulator installs between the leaves.
Rear spring bushing
p/n: 60-0311-35
Bushing, rear spring front eye, inlox cartridge type as original.
Rear Spring Eye Bushing
p/n: 60-0208-32
This Rear Spring Eye Bushing pair is designed from the original part for superior fitment and function. Bushings are for the rear spring, shackle eye, and spring eye. Up to twelve (12) per car.
Rear Spring Pad
p/n: 27-0010-35
Pad, rear spring insulator for one and three fourths (1-3/4") inch wide springs. Four (4) per vehicle.
Rear Spring Pad
p/n: 70-0245-32
Pad, rear spring insulator for two and one fourth (2-1/4) inch wide springs. (see our number 70-0191-32 for two (2) inch springs). Four (4) per vehicle.
Rear Spring Pad
p/n: 30-0452-32
Insulator, rear spring leaf clip. Seven and one half (7-1/2) inch long, customer may trim for shorter lengths. May use up to eight (8) per car.
Rear Spring Pad
p/n: 70-2080-32
Pad, rear spring insulator. Order four (4) per car.Length: 4.75 inches. Width: 2.875 inches.
Rear Spring Pad
p/n: 70-0191-32
Pad, rear spring insulator for two (2) inch wide springs. (see our number 70-0245-32 for two and one fourth (2-1/4) inch springs). Cloth reinforced. Four (4) per vehicle.
Rear spring pad
p/n: 30-0370-32
Separator, spring leaf, rear. Use as required, up to twenty four (24) needed per car.
Rear Spring Shackle Rubber Bushing
p/n: 60-0236-48
This Rear Spring Shackle Rubber Bushing is designed from the original part for an authentic fit, finish and function. Bushing fits left or right-hand side and upper or lower spring eye.
Rear Spring Thrust Washer
p/n: 40-0525-32
Thrust washer, rear spring. "Silent Block". Three sixteenths (3/16) inch thick. One (1) inch by one and three fourths (1-3/4) inch.
Rear Spring Thrust Washer
p/n: 40-0526-32
Thrust washer, rear spring. "Silent Block". Three sixteenths (3/16) inch thick. Seven eighths (7/8) inch by one and five eighths (1-5/8).
Spring Eye Bushing
p/n: 30-0372-32
Bushing, rear spring eye leaf and shackle. Nine sixteenths (9/16) inch inside diameter, one and three eighths (1-3/8) inch barrel.
Spring eye bushing
p/n: 30-0081-32
Bushing, spring eye leaf, rear of front spring; or front of rear spring.
Spring eye bushing
p/n: 10-0131-35
Bushing, spring eye, both eye leaf and shackle. Front and rear.Qty Required:20 Twelve (12) required per front, eight (8) required per rear.
Spring Mount Cushion Set
p/n: 13-0004-35
This eight (8) piece Spring Mount Cushion set is made to OEM specifications to install for an authentic fit, finish and function. Eight (8) piece set for front and rear of all four (4) springs.
Spring Mount Cushion Set
p/n: 70-1941-35
This six (6) piece Spring Mount Cushion set is made to OEM specifications to install for an authentic fit, finish and function. Set is for both front and rear of all four springs.
Spring Mount Cushion Set
p/n: 40-0070-32
This Spring Mount Cushion set is for Goodyear type spring mounts. This set is for both front and rear springs.
Spring Mount Cushion Set
p/n: 15-0012-35
This eight (8) piece Spring Mount Cushion set is made to OEM specifications to install for an authentic fit, finish and function. Set is for both front and rear of all four springs (Goodyear type).
Spring Mount Cushion Set
p/n: 15-0009-35
This eight (8) piece Spring Mount Cushion set is made to OEM specifications to install for an authentic fit, finish and function. Set is for both front and rear of all four springs.
Spring Mount Cushion Set
p/n: 15-0001-35
This eight (8) piece Spring Mount Cushion set is made to OEM specifications to install for an authentic fit, finish and function. Set is for both front and rear of all four springs (Goodyear type).
Spring Mount Cushion Set
p/n: 15-0008-35
This eight (8) piece Spring Mount Cushion set is made to OEM specifications to install for an authentic fit, finish and function. A "silent block" type spring mount cushion set.
Spring or Stabilizer Bushing
p/n: 11-0020-35
Bushing, spring bracket on frame (Auburn and Cord 810 & 812). Also used as a grommet, front stabilizer bar (Graham models 116 & 120). Fully molded rubber.
Spring seat service
p/n: 60-0619-35
Seat, rear spring. Revulcanization service only. Send in complete casting with metal sleeve bushing.
Spring shackle bushing
p/n: 30-0090-32
Bushing, spring shackle, for shackle and eye leaf of rear spring. Eight (8) required per car.
Spring Shackle Bushing
p/n: 30-0420-32
This Spring Shackle Bushing is designed from the original part for superior fitment and function. Six (6) per car. Packard's "self flanging" type.
Spring Shackle Bushing
p/n: 40-0183-32
Bushing, spring and shackle, front and rear leaf springs. Eight (8) or twelve (12) required per car.Length: 1.25 inches. Height: 1.25 inches.
Spring shackle bushing
p/n: 70-0444-32
Bushing, rear spring shackle, upper. Four (4) required per car.
Spring Shackle Bushing
p/n: 30-0344-32
Bushing, rear spring and shackle. One and one eighth (1-1/8) inch diameter with nine sixteenths (9/16) inch hole. One set contains twelve (12) pieces.
Spring Shackle Bushing
p/n: 30-0076-32
Bushing, spring shackle, front spring, front end; or rear spring, rear end. Two and one eighth (2-1/8) inch long. Sixteen (16) required per car.