Front Axle Bumpers
p/n: 20-2175-33
This Front Axle Bumper pair is designed from the original part for an authentic fit, finish and function. These Bumpers are manufactured with top quality materials for good durability.
Axle Rebound Pad
p/n: 70-2591-32
Bumper, air suspension rear axle impact. Located on frame rail. Rubber only, does not include metal retaining clips or bolts.
Support Arm Bumper
p/n: 50-0261-32
Bumper, steering knuckle support upper arm (for front shock absorber arm).Width: 1.5 inches.
Front Spring Upper Bumpers
p/n: 30-0516-32
This Front Spring Upper Bumper pair is a quality reproduction of the original factory part. These dense rubber bumpers mount left and right to function as the rebound bumper for the front springs.
Front Suspension Bumpers
p/n: 40-0251-32
This Front Suspension Bumper pair for the upper arm is made from high-quality EPDM dense rubber for a precise, factory like fit. Two (2) required per car.
Front Spring Bumper
p/n: 60-0021-35
Rebound bumper, front spring and rear spring for beam axle cars, steel ring reinforced as original.Height: 2.4375 inches.
Front Suspension Bumper
p/n: 70-2649-35
This Front Suspension Bumper pair for the Lower A-arm is made from 100% EPDM dense rubber for durability. Fully molded with integral mounting bolt.
Axle Rebound Pad - Front
p/n: 10-0129-35
Axle Rebound Pad - Front. Made from top quality rubber to ensure durability. This part is compatible with (1912 - 1915) Sterns-Knight models.
Axle Rebound Pad
p/n: 50-0051-35
Pad, axle rebound, ring type, usually retained by leather straps or clip & bolt.
Support Arm Bumper
p/n: 50-0526-32
Bumper, lower support arm. With metal core and attaching bolt. One (1) pair per car.Width: 2.4375 inches. Height: 4.0 inches.
Radius Arm Bushing and Axle Set
p/n: 20-0780-32
This Radius Arm Bushing Set is a quality reproduction of the original factory part. This eight (8) piece bushing set fits four-wheel (4WD) drive trucks and Bronco.
Front Spring Bumper
p/n: 50-0238-35
Bumpers, front spring, Two (2) per car.Width: 2.0 inches. Height: 1.75 inches.
Axle Rebound Pad
p/n: 27-0081-32
Bumper, rear axle on leaf spring.Width: 3.25 inches. Height: 4.75 inches.
Front Spring Bumpers
p/n: 30-0120-32
This Front Spring Bumper pair is a quality reproduction of the original factory part. Self retaining type bumper manufactured with top quality materials.
Ride regulator control grommet
p/n: 70-0639-33
Grommets, ride regulator control rod through fender splash shield. Two (2) per car. Made without rod hole. You cut rod slot as required at installation.
Axle Rebound Pad
p/n: 50-0370-35
Bumper, rear axle stop. Molded left and right. Revulcanization service only.
Upper Suspension Arm Dust Seal
p/n: 70-0890-32
Seal, upper A-arm, inner and outer. Four (4) piece set.Height: 1.0 inches.
Lower Suspension Arm Dust Seal Set
p/n: 70-0865-32
This four (4) piece Lower Suspension Arm Dust Seal Set is fully molded of high-quality EPDM dense rubber for durability and proper fitment. These seals are used to protect your lower suspension arm bushings from dust and debris.
Front Suspension Bumper
p/n: 70-1022-32
Bumper, front suspension, lower on spring seat. Made with long lasting Buna rubber.1958: Also used on other models with air suspension.Width: 1.875 inches.
Front Spring Bumpers
p/n: 30-0087-32
This Front Spring Bumper pair is a quality reproduction of the original factory part. Self retaining type bumper manufactured with top quality materials.
Front Suspension Bumper
p/n: 27-0080-32
This Front Suspension Bumper, front suspension lower A-arm, is made from high-quality EPDM rubber for a precise, factory fit.
Axle Rebound Pad
p/n: 10-0002-35
Pad, front axle rebound, including bolt hole. Excellent copy, highest grade material.Width: 2.25 inches. Height: 1.50 inches.
Axle Rebound Pad
p/n: 70-0238-32
Pads, axle rebound, rear two and one fourth (2-1/4) inches diameter by three (3) inches high.Height: 3.0 inches.
Axle Rebound Pad Service
p/n: 70-0502-32
Bumper, rear spring to frame, two (2) per car.Width: 2.5 inches. Height: 2.5 inches.
Axle Rebound Pad Service
p/n: 10-0003-35
Pad, rear axle rebound, perfect duplication. Length: 4.0 inches. Height: 1.25 inches.
Front Suspension Rebound Pad
p/n: 50-0083-32
Rebound pad, front suspension, upper arm, on frame. Rubber body, steel core with five sixteenths (5/16) inch stud.
Front Spring Bumper
p/n: 30-0517-32
Bumper, front spring rebound, lower.Width: 2.125 inches. Height: 2.25 inches.
Axle Rebound Pad
p/n: 30-0371-32
Bumper, rear frame to axle rubber. Two (2) per car.Length: 5.1875 inches. Width: 2.0625 inches.
Front Suspension Bumper
p/n: 40-0250-32
Bumper, front suspension, lower arm. Two (2) per car.Width: 3.0 inches. Height: 1.625 inches.
Front Spring Bumpers - Lower Suspension Arms
p/n: 70-0172-32
This Front Spring Bumpers pair is designed from the original part for an authentic fit, finish, and appearance. These front spring bumpers install to the lower suspension arms. An original copy reproduction.
Front Spring Bumper
p/n: 11-0021-35
Bumpers, front spring. Four (4) piece set.Height: 1.1875 inches.
Axle Rebound Pad
p/n: 30-0043-32
Pads, front axle rebound. Correct shape and design like original.Length: 3.625 inches. Width: 2.125 inches. Height: 2.125 inches.
Front Suspension Bumper
p/n: 70-1295-32
Bumper assembly, front load compression, lower.Width: 2.125 inches. Height: 2.75 inches.
Axle Rebound Pad - Rear
p/n: 10-0128-35
Axle Rebound Pad - Rear. Made from top quality rubber to ensure durability. This part is compatible with (1912 - 1915) Sterns-Knight models.
Front Suspension Bumpers - Lower Control Arm
p/n: 70-1463-32
This Front Suspension Bumper pair for the Lower Control Arm is made from high-quality EPDM rubber with a steel core for a precise, factory like fit. Width: 2-1/4" inches. Height: 1-7/8" inches.
Axle Rebound Pad
p/n: 30-0054-32
Pads, rear axle rebound.Length: 5.125 inches. Width: 1.4375 inches.
Axle Rebound Bumper Service - Revulcanization Only
p/n: 60-0605-32
This Revulcanization Service Only is designed to restore your Front Axle Rebound Bumper to a like new original condition. Service requires your metal core. Please call or email for more service details and ordering.
Front Spring Bumper
p/n: 30-0119-32
Bumper, front spring compression, lower arm. Steel core, retained by clip (not included).Height: 2.625 inches.
Axle Rebound Pad
p/n: 70-2071-32
Bumper, rear axle impact. Fully molded with new metal core.Width: 4.625 inches. Height: 1.875 inches.
Front spring bumper
p/n: 30-0227-32
Bumper assembly, front spring rebound (upper arm). Steel core, with treaded stud just like original.
