3/8" Frame Grommet
p/n: 32-0414-32
This Frame Grommet is fully molded and designed from the original part for superior fitment and seal. Designed for the Bijur Lubricator delivery tube to run thru the frame at various places.
Axle Bumper
p/n: 20-0773-32
This Axle Bumper is a quality reproduction of the original factory part. This wedge-shaped rubber rebound bumper fits to the front axle on truck models and the rear axle on van models.
Axle Bumpers
p/n: 60-0491-32
This Rear Axle Bumper pair is a quality reproduction of the original factory part. These bottoming rebound pads are dense rubber blocks that mount to the rear axle tube.
Axle Rebound Bumper Service - Revulcanization Only
p/n: 60-0605-32
This Revulcanization Service Only is designed to restore your Front Axle Rebound Bumper to a like new original condition. Service requires your metal core. Please call or email for more service details and ordering.
Axle Rebound Pad
p/n: 30-0102-32
Pads, axle rebound, block type with flange. One and one half (1-1/2) inch by one and three fourths (1-3/4) inch by two and one half (2-1/2) inch overall.
Axle Rebound Pad
p/n: 50-0265-35
Bumpers, rear axle to frame.Width: 2.0 inches. Height: 1.25 inches.
Axle Rebound Pad
p/n: 70-2591-32
Bumper, air suspension rear axle impact. Located on frame rail. Rubber only, does not include metal retaining clips or bolts.
Axle Rebound Pad
p/n: 50-0370-35
Bumper, rear axle stop. Molded left and right. Revulcanization service only.
Axle Rebound Pad
p/n: 70-0473-32
Pads, rear axle, springs to frame, on frame. Large pads, fully molded with screw fastening holes.
Axle Rebound Pad
p/n: 30-0054-32
Pads, rear axle rebound.Length: 5.125 inches. Width: 1.4375 inches.
Axle Rebound Pad
p/n: 60-0678-32
Bumper, rear axle, upper. New production, not an aftermarket replacement.
Axle Rebound Pad
p/n: 40-0373-32
Bumpers, rear axle. Revulcanization service only.Length: 3.0 inches.
Axle Rebound Pad
p/n: 15-0003-35
Bumper, frame to axle, rear, with steel core as original.Width: 3.0 inches.
Axle Rebound Pad
p/n: 50-0254-35
Bumpers, front axle, springs to frame. Fit original retainers.Length: 1.9375 inches. Width: 1.8125 inches.
Axle Rebound Pad
p/n: 70-2225-32
Bumper, rear spring axle impact. Located on frame rail. Rubber only, does not include metal retaining clips or bolts.
Axle Rebound Pad
p/n: 70-1289-32
Bushing, rear support arm. Rear upper. Four (4) per car. For lower see #70-1290-32.
Axle Rebound Pad
p/n: 30-0371-32
Bumper, rear frame to axle rubber. Two (2) per car.Length: 5.1875 inches. Width: 2.0625 inches.
Axle Rebound Pad
p/n: 40-0252-32
Bumper, rear axle spring. Three (3) per car.Length: 2.1875 inches. Width: 1.0 inches. Height: 2.0 inches.
Axle Rebound Pad
p/n: 30-0125-32
Bumpers, rear axle spring.Length: 5.375 inches. Width: 2.75 inches. Height: 2.1875 inches.
Axle Rebound Pad
p/n: 30-0043-32
Pads, front axle rebound. Correct shape and design like original.Length: 3.625 inches. Width: 2.125 inches. Height: 2.125 inches.
Axle Rebound Pad
p/n: 50-0253-35
Bumpers, rear axle, springs to frame. Fit original retainers.Length: 2.25 inches. Width: 1.625 inches.
Axle Rebound Pad
p/n: 10-0002-35
Pad, front axle rebound, including bolt hole. Excellent copy, highest grade material.Width: 2.25 inches. Height: 1.50 inches.
Axle Rebound Pad
p/n: 27-0081-32
Bumper, rear axle on leaf spring.Width: 3.25 inches. Height: 4.75 inches.
Axle Rebound Pad
p/n: 70-0237-32
Pads, axle rebound. Front, between springs and frame.Length: 2.0 inches. Width: 1.5 inches. Height: 1.75 inches.
Axle Rebound Pad
p/n: 50-0371-35
Bumper, rear axle. Revulcanization service only.Height: 3.5 inches.
Axle Rebound Pad
p/n: 70-2071-32
Bumper, rear axle impact. Fully molded with new metal core.Width: 4.625 inches. Height: 1.875 inches.
Axle Rebound Pad
p/n: 50-0051-35
Pad, axle rebound, ring type, usually retained by leather straps or clip & bolt.
Axle Rebound Pad
p/n: 50-0050-35
Pad, axle rebound, one and three eighths (1-3/8) inch diameter by two (2) inch. Fits metal retainer. Height: 2.0 inches.
Axle Rebound Pad
p/n: 70-0238-32
Pads, axle rebound, rear two and one fourth (2-1/4) inches diameter by three (3) inches high.Height: 3.0 inches.
Axle Rebound Pad
p/n: 70-1290-32
Bushing, rear support arm. Rear lower. Four (4) per car. For upper see #70-1289-32.
Axle Rebound Pad
p/n: 30-0534-32
Bumper, rear axle rebound.Length: 3.0 inches. Width: 2.375 inches. Height: 1.6875 inches.
Axle Rebound Pad
p/n: 13-0002-35
Pad, front axle rebound, integral dovetail retaining lug. Excellent copy.
Axle Rebound Pad - Front
p/n: 10-0129-35
Axle Rebound Pad - Front. Made from top quality rubber to ensure durability. This part is compatible with (1912 - 1915) Sterns-Knight models.
Axle Rebound Pad - Rear
p/n: 10-0128-35
Axle Rebound Pad - Rear. Made from top quality rubber to ensure durability. This part is compatible with (1912 - 1915) Sterns-Knight models.
Axle Rebound Pad Service
p/n: 70-0502-32
Bumper, rear spring to frame, two (2) per car.Width: 2.5 inches. Height: 2.5 inches.
Axle Rebound Pad Service
p/n: 10-0003-35
Pad, rear axle rebound, perfect duplication. Length: 4.0 inches. Height: 1.25 inches.
Center Rear Axle Bumper
p/n: 20-2728-32
This Center Rear Axle Bumper is designed from the original part for superior fitment and function. A dense rubber bumper that mounts to the vehicle floor pan.
Control Arm Bumper
p/n: 40-0465-32
Bumper, upper control arm. One (1) pair per car.Height: 1.375 inches.
Control Arms Cross-Shaft Bushing Seal
p/n: 60-0094-32
This Control Arms Cross-Shaft Bushing Seal is designed from the original part for superior fitment and seal. Installs at upper and lower control arm cross shaft bushing, at inner end of control arm.
Front Axle Bumper
p/n: 20-1577-33
This Front Axle Bumper is a quality reproduction of the original factory part. These bottoming bump stops are dense rubber blocks that mount with a stud to a front axle bracket.
Front Axle Bumper
p/n: 20-2007-32
This Front Axle Bumper is designed from the original part for superior fitment and function. A dense rubber bumper with threaded stud.
Front Axle Bumper
p/n: 20-0938-32
This Front Axle Bumper is a quality reproduction of the original factory part. Fully molded with top quality EPDM rubber.
Front Axle Bumper
p/n: 20-0833-32
This Front Axle Bumper is a quality reproduction of the original factory part. A dense rubber bonded to metal base with threaded mounting stud.
Front Axle Bumper - 4WD
p/n: 20-0774-32
This Front Axle Bumper is a quality reproduction of the original factory part. This rebound bumper is a quality dense rubber block that mount by bracket to the front axle tube.
Front Axle Bumpers
p/n: 20-2175-33
This Front Axle Bumper pair is designed from the original part for an authentic fit, finish and function. These Bumpers are manufactured with top quality materials for good durability.
Front or Rear Axle Bumper
p/n: 20-1576-33
This Front or Rear Axle Bumper is designed from the original part for superior fitment, finish and function. An exact reproduction of original. Typically order two per vehicle.
Front or Rear Axle Bumper
p/n: 20-0645-32
This Front or Rear Axle Bumper is a quality reproduction of the original factory part. These bottoming pads are dense rubber blocks that mount by bracket to the axle tube.
Front Spring Bumper
p/n: 50-0240-35
Bumper, front spring axle to frame. Length: 1.875 inches. Width: 1.75 inches.
Front Spring Bumper
p/n: 50-0238-35
Bumpers, front spring, Two (2) per car.Width: 2.0 inches. Height: 1.75 inches.
Front spring bumper
p/n: 30-0227-32
Bumper assembly, front spring rebound (upper arm). Steel core, with treaded stud just like original.
Front Spring Bumper
p/n: 40-0349-32
This Front Spring Bumper pair is designed from the original part for superior fitment and function. This is the front spring to frame bumper and also known as front axle bumper.
Front Spring Bumper
p/n: 60-0021-35
Rebound bumper, front spring and rear spring for beam axle cars, steel ring reinforced as original.Height: 2.4375 inches.
Front Spring Bumper
p/n: 30-0119-32
Bumper, front spring compression, lower arm. Steel core, retained by clip (not included).Height: 2.625 inches.
Front Spring Bumper
p/n: 70-0339-32
Bumper, front spring, upper arm on frame. Rubber with heavy steel core, including five sixteenths (5/16) inch stud.
Front Spring Bumper
p/n: 30-0517-32
Bumper, front spring rebound, lower.Width: 2.125 inches. Height: 2.25 inches.
Front Spring Bumper
p/n: 11-0021-35
Bumpers, front spring. Four (4) piece set.Height: 1.1875 inches.
Front Spring Bumper
p/n: 50-0423-35
Bumper, front spring. Fits onto original bracket.Length: 2..125 inches. Width: 2.0 inches. Height: 1.875 inches.
Front Spring Bumper Service
p/n: 10-0133-35
Bumpers, front spring to frame. Vulcanization service only. Width: 1.3125 inches.
Front Spring Bumper Service
p/n: 15-0006-35
Bumper, front spring to frame. Revulcanization service only.Width: 4.625 inches.
Front Spring Bumpers
p/n: 60-0393-32
This Front Spring Bumper pair is a quality reproduction of the original factory part. These axle to frame bottoming rebound pads are dense rubber blocks that mount to the front axle.
Front Spring Bumpers
p/n: 30-0120-32
This Front Spring Bumper pair is a quality reproduction of the original factory part. Self retaining type bumper manufactured with top quality materials.
Front Spring Bumpers
p/n: 30-0087-32
This Front Spring Bumper pair is a quality reproduction of the original factory part. Self retaining type bumper manufactured with top quality materials.
Front Spring Bumpers - Lower Suspension Arms
p/n: 70-0172-32
This Front Spring Bumpers pair is designed from the original part for an authentic fit, finish, and appearance. These front spring bumpers install to the lower suspension arms. An original copy reproduction.
Front Spring Rubber Bumpers
p/n: 70-0329-32
This Front Spring Rubber Bumper Pair fits to the upper control arms on frame. Manufactured to OEM specifications to install for an authentic fit, finish and function.
Front Spring Upper Bumpers
p/n: 30-0516-32
This Front Spring Upper Bumper pair is a quality reproduction of the original factory part. These dense rubber bumpers mount left and right to function as the rebound bumper for the front springs.
Front suspension bumper
p/n: 30-0229-32
Bumper assembly, front suspension rebound (upper arm). Straight style with stud.
Front Suspension Bumper
p/n: 27-0080-32
This Front Suspension Bumper, front suspension lower A-arm, is made from high-quality EPDM rubber for a precise, factory fit.
Front suspension bumper
p/n: 60-0677-32
Bumper, front suspension. Molded with side clearances as original.
Front Suspension Bumper
p/n: 70-1294-32
Bumper, front load rebound, upper.Width: 1.625 inches. Height: 2.75 inches.
Front Suspension Bumper
p/n: 40-0250-32
Bumper, front suspension, lower arm. Two (2) per car.Width: 3.0 inches. Height: 1.625 inches.
Front Suspension Bumper
p/n: 30-0228-32
Bumper assembly, front suspension inside coil spring, with five sixteenths (5/16) inch threaded studs as found originally.
Front Suspension Bumper
p/n: 50-0125-32
Bumper, front suspension, lower arm.Width: 2.625 inches. Height: 2.5625 inches.
Front Suspension Bumper
p/n: 70-1295-32
Bumper assembly, front load compression, lower.Width: 2.125 inches. Height: 2.75 inches.
Front Suspension Bumper
p/n: 70-1022-32
Bumper, front suspension, lower on spring seat. Made with long lasting Buna rubber.1958: Also used on other models with air suspension.Width: 1.875 inches.
Front Suspension Bumper
p/n: 30-0489-32
Bumper, front suspension (inside of coil spring). Made with three eighths (3/8) inch stud as original.
Front Suspension Bumper
p/n: 60-0093-32
Bumper, front lower suspension arm. Attaches to front cross member by carrot retainer.Height: 2.0 inches.
Front suspension bumper
p/n: 40-0356-32
Bumper, front suspension upper arm. Vulcanized into one piece as original with steel plate and stud.