Suspension Bushing
p/n: 30-0385-36
Bushing and pin assembly, cartridge, Inlox type, front wheel lower support arm inner pin. Shipped with instructions for re-installing.Length: 5.75 inches.
Suspension Bushing
p/n: 30-0386-36
Bushing and pin assembly cartridge. Inlox type, front wheel lower support arm inner pin. Shipped with instructions for reinstalling.Length: 5.75 inches.
Front Spring Bumper
p/n: 70-0339-32
Bumper, front spring, upper arm on frame. Rubber with heavy steel core, including five sixteenths (5/16) inch stud.
Front Suspension Bumper
p/n: 30-0490-32
Bumper, front suspension (inside of coil spring). Made with three five sixteenths (5/16) inch studs as original.
Rear Axle Bumpers - Revulcanization
p/n: 11-0030-35
This Rear Axle Bumpers - Revulcanization is designed to restore your original rubber bumper pads to a like new condition. Service requires your metal cores. Please call or email for more service details and ordering. Revulcanization service only.
Front Suspension Bumper
p/n: 30-0228-32
Bumper assembly, front suspension inside coil spring, with five sixteenths (5/16) inch threaded studs as found originally.
Front Spring Bumper Service
p/n: 15-0006-35
Bumper, front spring to frame. Revulcanization service only.Width: 4.625 inches.
Axle Rebound Pad
p/n: 70-0473-32
Pads, rear axle, springs to frame, on frame. Large pads, fully molded with screw fastening holes.
Front Suspension Bumper
p/n: 30-0489-32
Bumper, front suspension (inside of coil spring). Made with three eighths (3/8) inch stud as original.
Axle Rebound Pad
p/n: 50-0371-35
Bumper, rear axle. Revulcanization service only.Height: 3.5 inches.
Ride Regulator Control Grommet
p/n: 70-0344-33
Grommets, ride regulator control rod through fender splash shield. Two (2) per car.Length: 5.875 inches. Width: 1.75 inches.
Rear Axle Suspension Bumper
p/n: 70-2638-35
This Rear Axle Suspension Bumper is fully molded with new rubber vulcanized to new steel cores. Used on all models with conventional spring suspension.
Front Suspension Service
p/n: 70-0754-32
Bumper, front suspension on shock absorber arm. Revulcanization service only.Width: 2.125 inches. Height: 3.0 inches.
Rear Spring Bumpers
p/n: 60-0179-35
This Rear Spring Bumper pair is designed from the original part for an authentic fit, finish, and appearance. Mounts to the frame for the rear springs. An assembly with rubber vulcanized to steel as original.
Front suspension bumper
p/n: 40-0356-32
Bumper, front suspension upper arm. Vulcanized into one piece as original with steel plate and stud.
Axle Rebound Pad
p/n: 15-0003-35
Bumper, frame to axle, rear, with steel core as original.Width: 3.0 inches.
Rear Spring Bumper Service
p/n: 60-0425-32
Bumpers, rear springs to frame. Revulcanization service only.Length: 3.0 inches. Width: 2.5 inches.
Rear Axle Housing Bushings
p/n: 25-0081-32
These reproduction Rear Axle Housing Bushings are designed from the original part for an authentic installation and fitment. A four (4) piece set for the upper and lower rear axle housing.
Front suspension bushing
p/n: 30-0239-32
Bushings, front suspension torque arm. Necessary for proper front end geometry.
Axle Rebound Pad
p/n: 40-0373-32
Bumpers, rear axle. Revulcanization service only.Length: 3.0 inches.
Front Spring Bumper
p/n: 40-0349-32
This Front Spring Bumper pair is designed from the original part for superior fitment and function. This is the front spring to frame bumper and also known as front axle bumper.
Axle Rebound Pad
p/n: 30-0125-32
Bumpers, rear axle spring.Length: 5.375 inches. Width: 2.75 inches. Height: 2.1875 inches.
Front suspension bumper
p/n: 30-0229-32
Bumper assembly, front suspension rebound (upper arm). Straight style with stud.
Ride Regulator Control Grommet
p/n: 70-0332-33
Grommets, ride regulator control rod through fender splash shield. Two (2) required per car.Length: 2.4375 inches. Width: 2.0 inches.
Rear spring bumper service
p/n: 60-0279-35
Bumper, rear spring on frame. Revulcanization service only.
Axle Rebound Pad
p/n: 13-0002-35
Pad, front axle rebound, integral dovetail retaining lug. Excellent copy.
Front spring bumper
p/n: 30-0227-32
Bumper assembly, front spring rebound (upper arm). Steel core, with treaded stud just like original.
Axle Rebound Pad
p/n: 70-2071-32
Bumper, rear axle impact. Fully molded with new metal core.Width: 4.625 inches. Height: 1.875 inches.
Front Suspension Lower Control Arm Bumpers
p/n: 30-0119-32
A Front Suspension Lower Control Arm Bumper pair designed from the original part for superior fitment and function. Made from high-quality EPDM rubber with a steel core for a precise, factory fit.
Axle Rebound Bumper Service - Revulcanization Only
p/n: 60-0605-32
This Revulcanization Service Only is designed to restore your Front Axle Rebound Bumper to a like new original condition. Service requires your metal core. Please call or email for more service details and ordering.
Rear Axle Bumpers
p/n: 30-0054-32
This Rear Axle Bumper pair is a quality reproduction of the original factory part. Reproduction bumpers with the correct shape and design like original.
Axle Rebound Pad - Rear
p/n: 10-0128-35
Axle Rebound Pad - Rear. Made from top quality rubber to ensure durability. This part is compatible with (1912 - 1915) Sterns-Knight models.
Front Suspension Bumper
p/n: 70-1295-32
Bumper assembly, front load compression, lower.Width: 2.125 inches. Height: 2.75 inches.
Front Suspension Bumpers - Lower Control Arm
p/n: 70-1463-32
This Front Suspension Bumper pair for the Lower Control Arm is made from high-quality EPDM rubber with a steel core for a precise, factory like fit. Width: 2-1/4" inches. Height: 1-7/8" inches.
Front Axle Bumpers
p/n: 30-0043-32
This Front Axle Bumper pair is a quality reproduction of the original factory part. Reproduction bumpers with the correct shape and design like original.
Front Spring Bumper
p/n: 11-0021-35
Bumpers, front spring. Four (4) piece set.Height: 1.1875 inches.
Front Suspension Bumper
p/n: 40-0250-32
Bumper, front suspension, lower arm. Two (2) per car.Width: 3.0 inches. Height: 1.625 inches.
Front Spring Bumpers - Lower Suspension Arms
p/n: 70-0172-32
This Front Spring Bumpers pair is designed from the original part for an authentic fit, finish, and appearance. These front spring bumpers install to the lower suspension arms. An original copy reproduction.
Axle Rebound Pad
p/n: 30-0371-32
Bumper, rear frame to axle rubber. Two (2) per car.Length: 5.1875 inches. Width: 2.0625 inches.
Front Spring Bumper
p/n: 30-0517-32
Bumper, front spring rebound, lower.Width: 2.125 inches. Height: 2.25 inches.
Front Suspension Rebound Pad
p/n: 50-0083-32
Rebound pad, front suspension, upper arm, on frame. Rubber body, steel core with five sixteenths (5/16) inch stud.
Axle Rebound Pad Service
p/n: 10-0003-35
Pad, rear axle rebound, perfect duplication. Length: 4.0 inches. Height: 1.25 inches.
Axle Rebound Pad Service
p/n: 70-0502-32
Bumper, rear spring to frame, two (2) per car.Width: 2.5 inches. Height: 2.5 inches.
Axle Rebound Pad
p/n: 70-0238-32
Pads, axle rebound, rear two and one fourth (2-1/4) inches diameter by three (3) inches high.Height: 3.0 inches.
Axle Rebound Pad
p/n: 10-0002-35
Pad, front axle rebound, including bolt hole. Excellent copy, highest grade material.Width: 2.25 inches. Height: 1.50 inches.
Rear Axle Support Arm Bushings
p/n: 25-0082-32
These reproduction Rear Axle Support Arm Bushings are designed from the original part for an authentic installation and fitment. A four (4) piece set for the rear axle support arms.
Front Suspension Lower Control Arm Bumpers
p/n: 27-0080-32
A Front Suspension Lower Control Arm Bumper pair designed from the original part for superior fitment and function. Made from high-quality Nitrile rubber for a precise, factory fit.
Front Spring Bumpers
p/n: 30-0087-32
This Front Spring Bumper pair is a quality reproduction of the original factory part. Self-retaining type bumper manufactured with top quality materials.
Front Suspension Bumper
p/n: 70-1022-32
Bumper, front suspension, lower on spring seat. Made with long lasting Buna rubber.1958: Also used on other models with air suspension.Width: 1.875 inches.
Lower Suspension Arm Dust Seal Set
p/n: 70-0865-32
This four (4) piece Lower Suspension Arm Dust Seal Set is fully molded of high-quality EPDM dense rubber for durability and proper fitment. These seals are used to protect your lower suspension arm bushings from dust and debris.
Upper Suspension Arm Dust Seal
p/n: 70-0890-32
Seal, upper A-arm, inner and outer. Four (4) piece set.Height: 1.0 inches.
Axle Rebound Pad
p/n: 50-0370-35
Bumper, rear axle stop. Molded left and right. Revulcanization service only.
Ride regulator control grommet
p/n: 70-0639-33
Grommets, ride regulator control rod through fender splash shield. Two (2) per car. Made without rod hole. You cut rod slot as required at installation.
Front Spring Bumpers
p/n: 30-0120-32
This Front Spring Bumper pair is a quality reproduction of the original factory part. Self retaining type bumper manufactured with top quality materials.
Rear Axle Leaf Spring Bumpers
p/n: 27-0081-32
This Rear Axle Leaf Spring Bumper pair is designed from the original part for superior fitment and function. These bumpers mount to each side of the rear axle assembly at the leaf springs.
Front Spring Bumper
p/n: 50-0238-35
Bumpers, front spring, Two (2) per car.Width: 2.0 inches. Height: 1.75 inches.
Radius Arm Bushing and Axle Set
p/n: 20-0780-32
This Radius Arm Bushing Set is a quality reproduction of the original factory part. This eight (8) piece bushing set fits four-wheel (4WD) drive trucks and Bronco.
Axle Rebound Pad
p/n: 50-0051-35
Pad, axle rebound, ring type, usually retained by leather straps or clip & bolt.