Windshield Gasket with Groove
p/n: 70-2300-50
This Windshield Gasket mounts around the full perimeter of the front glass. This gasket has an integrated locking strip, properly molded corners, and a slot / groove to accommodate a reveal decorative (chrome) molding around the windshield.
Windshield Gasket with Groove
p/n: 20-0138-50
This Windshield Gasket with Groove mounts around the full perimeter of the front glass and has properly molded corners for a precise, factory fit. It also has the slot to accommodate the outer edge's decorative molding.
Windshield Gasket with Groove
p/n: 70-2176-50
This Windshield Gasket with Groove mounts around the full perimeter of the front glass and has properly molded corners. It requires a locking strip for installation (not included). Locking strips are available in either black or chrome.
Windshield Gasket with Trim Groove for Steel Trim
p/n: 70-4519-52
This Windshield Gasket mounts around the full perimeter of the front glass and has properly molded corners for a precise, factory fit. This seal has the slot to accommodate chrome trim reveal molding.
Windshield Gasket without Groove
p/n: 70-4510-52
This Windshield Gasket mounts around the full perimeter of the front glass and has properly molded corners for a precise, factory fit. This is a standard black gasket with NO reveal molding groove.
Windshield Gasket Without Groove
p/n: 70-4523-52
This Windshield Gasket Without Groove mounts around the full perimeter of the front glass and has properly molded corners for a precise, factory fit. This is a standard black gasket with NO reveal molding groove.
Windshield Gasket without Groove
p/n: 70-2450-50
This self locking type Windshield Gasket is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the front glass and has vulcanized, or bonded, ends which means no cutting or splicing is required for installation.
Windshield Gasket without Groove
p/n: 60-0289-50
This Windshield Gasket without Groove is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the front glass and has vulcanized, or bonded, ends which means no cutting or splicing is required for installation. For models with no reveal molding.
Windshield Gasket without Groove
p/n: 70-4518-52
This Windshield Gasket mounts around the full perimeter of the front glass and has properly molded corners for a precise, factory fit. This is a standard black gasket with NO reveal molding groove
Windshield Gasket without Groove
p/n: 70-1916-50
This Windshield Gasket without Groove mounts around the full perimeter of the front glass. This is a standard black gasket without a reveal molding lockstrip trim groove. Manufactured to original specifications and from high quality materials.
Windshield Gasket without Groove
p/n: 20-0803-50
This Windshield Gasket without Groove mounts around the full perimeter of the front glass and has properly molded corners for a precise, factory fit. This seal does not have the slot to accommodate the outer edge's decorative chrome reveal molding.
Windshield Gasket without Groove
p/n: 70-4511-52
This Windshield Gasket mounts around the full perimeter of the front glass and has properly molded corners for a precise, factory fit. This is a standard black gasket with NO reveal molding groove.
Windshield Gasket without Groove
p/n: 70-4505-52
This Windshield Gasket without Groove mounts around the full perimeter of the front glass and has properly molded corners for a precise, factory fit. This is a standard black gasket with NO reveal molding groove.
Windshield Gasket without Groove
p/n: 70-3542-50
This Windshield Gasket mounts around the full perimeter of the front glass and has properly molded corners for a precise, factory fit.
Windshield Header and A-Pillar Weatherstrip
p/n: 70-4740-52
This Windshield Header and A-Pillar Weatherstrip mounts around the top of the front windshield glass and continues down both A-Pillar windshield posts. This reproduction has properly molded corners and molded ends for a precise, factory fit.
Windshield Molding
p/n: 70-4806-52
This three-sided, one-piece Windshield Reveal Molding with no corner welds. The black with rain channel molding is designed from the original part for superior fitment.
Windshield Molding Set
p/n: 70-3987-50
This five (5) piece Windshield Molding Set contains the two (2) outer reveal molding (left and right) pieces, two (2) reveal molding clips and the windshield inner support strip.
Windshield to Cowl Weatherstrip
p/n: 10-0127-52
This windshield weatherstrip comes in a thirty-six inch (36") strip and seals the lower windshield frame to the cowl of the car. This generic part is known to fit Independent vehicle models produced from 1920 - 1924.
Windshield Weatherstrip
p/n: 70-1974-50
This Windshield Weatherstrip mounts around the full perimeter of the front glass and has vulcanized, or bonded, ends which means no cutting or splicing is required for installation. One hundred ten (110") inch loop.
Windshield Weatherstrip
p/n: 70-1972-50
This Windshield Weatherstrip mounts around the full perimeter of the front glass and has vulcanized, or bonded, ends which means no cutting or splicing is required for installation.
Windshield Weatherstrip
p/n: 60-0004-52
This Windshield Weatherstrip is made of a high-quality EPDM dense rubber extrusion. The four (4) foot strip mounts on the lower windshield for easy installation.
Windshield Weatherstrip
p/n: 70-1973-50
This Windshield Weatherstrip mounts around the full perimeter of the front glass and has vulcanized, or bonded, ends which means no cutting or splicing is required for installation. One hundred eight (108") inch loop.
Windshield Weatherstrip
p/n: 70-0997-52
This Window Weatherstrip is made of a high-quality EPDM dense rubber extrusion. The weatherstrip is used for the upper scraper seal.
Windshield Weatherstrip
p/n: 20-2203-50
This Windshield Weatherstrip gasket is a fully molded rubber channel for installing front window glass. Seals windshield glass to body and protects interior of vehicle. All corners are correctly molded to fit perfectly.
Windshield Weatherstrip Channel
p/n: 17-0032-52
This Windshield Weatherstrip Channel seals the windshield glass to body and protects interior of vehicle. Made from original parts to ensure great fit and easy installation.
Windshield Weatherstrip Channel
p/n: 40-0153-52
This ten (10) foot strip of Windshield Weatherstrip Channel seals the windshield glass to body and protects interior of vehicle.
Windshield Weatherstrip Channel
p/n: 17-0011-52
This Windshield Weatherstrip Channel is made of a high-quality EPDM dense rubber extrusion. The channel seals the windshield glass to the body and protects interior of the vehicle.
Windshield Weatherstrip Seal Set
p/n: 70-0017-52
This four (4) piece Windshield Weatherstrip Seal Set includes two Side weathterstrip channels, one Bottom weatherstrip strip, and one Top weatherstrip strip. All corners are correctly molded to fit perfectly.
Windshield Weatherstrip Seal Set
p/n: 70-0015-52
This Windshield Weatherstrip Seal Set includes two (2) 15" Single-Flap side weatherstrip seals and one (1) 45" Double-Flat bottom weatherstrip seal. The set seals the windshield glass to the body and protects the interior of vehicle.
Windshield Weatherstrip Set
p/n: 70-3915-50
This four (4) piece Windshield Weatherstrip Set works to install the Corvette windshield with a precise, like factory fit. Parts are designed from originals to fit correctly.
Windshield Weatherstrip Set
p/n: 70-0097-52
This Windshield Weatherstrip Set seals the windshield glass to the body and protects the interior of the vehicle. Fully molded rubber channel for installing front window glass. All corners are correctly molded to fit perfectly.
Windshield Weatherstrip Set
p/n: 70-0016-52
This three (3) piece Windshield Weatherstrip Set includes two 16-1/2" side weatherstrip channels and one 48" bottom weatherstrip channel. All corners are correctly molded to fit perfectly.
Windshield Weatherstrip Set
p/n: 70-1853-52
This Windshield Weatherstrip Set includes the bottom seal and the strip that runs around the top and sides. Both pieces are mounted to the body of the vehicle and create a seal when the glass is pressed against the body.
Windshield Weatherstrip Set
p/n: 70-0250-52
This Windshield Weatherstrip Set is made to handle one-fourth (1/4") inch glass and retain the Garnish Molding. An exact reproduction of original seals, manufactured and matched to your specific vehicle.