3/32" Windshield Weatherstrip
p/n: 60-0055-52
This Windshield Weatherstrip is specially marked for trimming to accommodate both widths required (1" or 1-1/2"), sold as one and one half (1-1/2) inch width only. Available by the foot.
Windshield Molding
p/n: 70-4806-52
This three-sided, one-piece Windshield Reveal Molding with no corner welds. The black with rain channel molding is designed from the original part for superior fitment.
Windshield Weatherstrip
p/n: 70-0997-52
This Window Weatherstrip is made of a high-quality EPDM dense rubber extrusion. The weatherstrip is used for the upper scraper seal.
Windshield Gasket for V-Butted Glass - No Center Bar
p/n: 70-4812-52
This Windshield Gasket extrusion mounts around the full perimeter of the front glass. Used when removing center division bar and installing one (1) piece "V" Butted Glass. An extrusion only - NOT Spliced.
Windshield Gasket
p/n: 70-2457-50
This windshield gasket is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the front glass and has vulcanized, or bonded, ends which means no cutting or splicing is required for installation.
Windshield Frame to Body Weatherstrip
p/n: 20-2044-52
This Windshield Frame To Body Weatherstrip is designed from the original part for superior fitment, finish and function. This weatherstrip fits into the windshield frame and seals it to the body.
Windshield Weatherstrip
p/n: 20-2203-50
This Windshield Weatherstrip gasket is a fully molded rubber channel for installing front window glass. Seals windshield glass to body and protects interior of vehicle. All corners are correctly molded to fit perfectly.
Swing-Out Windshield Weatherstrip
p/n: 20-3174-50
This Swing-Out Windshield Weatherstrip is designed from the original part. The weatherstrip mounts into the metal channel attached to the glass and creates a seal when the glass is pressed against the body of the vehicle.
Windshield Gasket
p/n: 20-0701-50
This Windshield Gasket is designed from the original part for superior fitment and seal. It also has the slot to accommodate the outer edge's decorative molding.
Windshield Gasket
p/n: 20-2893-50
This Windshield Gasket is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the front glass and has vulcanized, or bonded, ends which means no cutting or splicing is required for installation.
Windshield Gasket
p/n: 19-0005-52
This Windshield Gasket comes in a four (4) foot strip and is for horizontally split windshields. The slot fits on the upper half and the projecting edge meets the lower half when the windshield is closed.
Windshield Gasket with Groove
p/n: 20-0703-50
This Windshield Gasket is designed from the original part for superior fitment and seal. It also has the slot to accommodate the outer edge's decorative chrome molding.
Windshield Gasket
p/n: 20-0557-50
This windshield gasket is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the front glass and has vulcanized, or bonded, ends which means no cutting or splicing is required for installation.
Windshield Gasket
p/n: 20-0523-50
This Windshield Gasket is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the front glass and has vulcanized, or bonded, ends which means no cutting or splicing is required for installation.
Windshield Gasket with Groove
p/n: 20-0524-50
This Windshield Gasket is designed from the original part for superior fitment and seal. This gasket has the slot to accommodate the outer edge's decorative chrome molding.
Windshield Gasket
p/n: 70-2190-50
This Windshield Gasket mounts around the full perimeter of the front glass and has properly molded corners for a precise, factory fit.
Windshield Gasket
p/n: 70-2191-50
This Windshield Gasket mounts around the full perimeter of the front glass and has properly molded corners for a precise, factory fit.
Windshield Weatherstrip Set
p/n: 70-3915-50
This four (4) piece Windshield Weatherstrip Set works to install the Corvette windshield with a precise, like factory fit. Parts are designed from originals to fit correctly.
Windshield Gasket
p/n: 40-0320-52
This Windshield Gasket comes in a four (4) foot strip and is for the lower glass frame to cowl. This weatherstrip is for 2 piece windshields.
Windshield Weatherstrip
p/n: 60-0004-52
This Windshield Weatherstrip is made of a high-quality EPDM dense rubber extrusion. The four (4) foot strip mounts on the lower windshield for easy installation.
Windshield Gasket
p/n: 20-2777-50
This Windshield Gasket mounts around the full perimeter of the front glass and has properly molded corners for a precise, factory fit.
Windshield Gasket - No Groove
p/n: 20-0702-50
This Windshield Gasket is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the front glass and has vulcanized, or bonded, ends. This is a standard black gasket without a decorative reveal molding trim groove.
Windshield Gasket
p/n: 20-0463-50
This Windshield Gasket is designed from the original part for superior fitment and seal. The gasket mounts around the full perimeter of the front glass and has vulcanized, or bonded, ends which means no cutting or splicing is required for installation.
Windshield Gasket
p/n: 70-0078-52
This Windshield Gasket is made of a high-quality EPDM dense rubber extrusion. This four (4) foot weatherstrip mounts on the lower windshield.
Windshield Gasket
p/n: 19-0006-52
This Windshield Gasket comes in a four (4) foot strip and is for horizontally split windshields. The slot fits on the lower half and the projecting edge meets the upper half when the windshield is closed.
Windshield Gasket
p/n: 20-1321-50
This windshield gasket mounts around the full perimeter of the front glass and has properly molded corners for a precise, factory like fit. It also has the slot to accommodate the outer edge's decorative molding.
Windshield Gasket
p/n: 70-2452-50
This Windshield Gasket mounts around the full perimeter of the front glass and has properly molded corners for a precise, factory fit.
Windshield Gasket
p/n: 20-1473-50
This Windshield Gasket mounts around the full perimeter of the front glass and has properly molded corners for a precise, factory fit. It also has the slot to accommodate the outer edge's decorative molding.
Windshield Gasket
p/n: 70-2467-50
This Windshield Gasket mounts around the full perimeter of the front glass and has properly molded corners for a precise, factory fit. It also has the slot to accommodate the outer edge's decorative molding.
Windshield Gasket
p/n: 50-0105-52
This Windshield Gasket fits into receiver in windshield lower frame, to butt against windshield stanchions or pads. This windshield-to-cowl weatherstrip is approximately four (4) feet in length.
Windshield Gasket
p/n: 20-1605-50
This Windshield Gasket mounts around the full perimeter of the front glass and has the divider bar molded directly into it for a precise, factory fit. It also has the slot to accommodate the outer edge's decorative molding.
Windshield Gasket with Groove
p/n: 70-1703-50
This Windshield Gasket mounts around the full perimeter of the front glass and has vulcanized, or bonded, ends. It also has the slot to accommodate the outer edge's decorative molding.
Windshield Gasket without Groove
p/n: 70-4510-52
This Windshield Gasket mounts around the full perimeter of the front glass and has properly molded corners for a precise, factory fit. This is a standard black gasket with NO reveal molding groove.
Windshield Gasket
p/n: 70-1716-50
This Windshield Gasket mounts around the full perimeter of the front glass and has properly molded corners for a precise, factory fit.
Windshield Gasket with Groove
p/n: 70-1718-50
This Windshield Gasket mounts around the full perimeter of the front glass and has properly molded corners for a precise, factory fit. It also has the slot to accommodate the outer edge's decorative molding.
Swing-Out Windshield Weatherstrip
p/n: 60-0447-50
This Swing-Out Windshield Weatherstrip is designed from the original part. The seal mounts into the track (channel) attached to the glass that goes all the way around the windshield and creates a seal when the glass is pressed against the body of the vehicle.
Windshield Gasket
p/n: 70-2476-50
This Windshield Gasket mounts around the full perimeter of the front glass and has properly molded corners for a precise, factory fit.
Windshield Gasket
p/n: 20-1472-50
This Windshield Gasket mounts around the full perimeter of the front glass and has properly molded corners for a precise, factory fit. It also has the slot to accommodate the outer edge's decorative molding.
Windshield Gasket with Groove
p/n: 70-1917-50
This Windshield Gasket is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the front glass and requires a locking strip for installation (not included). Locking strips are available in either black or chrome.
Windshield Gasket without Groove
p/n: 70-1916-50
This Windshield Gasket without Groove mounts around the full perimeter of the front glass. This is a standard black gasket without a reveal molding lockstrip trim groove. Manufactured to original specifications and from high quality materials.
Swing-Out Windshield Weatherstrip
p/n: 60-0481-50
This Swing-Out Windshield Weatherstrip is designed from the original part. The seal mounts into the track (channel) attached to the glass that goes all the way around the windshield and creates a seal when the glass is pressed against the body of the vehicle.
Windshield Weatherstrip Set
p/n: 70-1853-52
This Windshield Weatherstrip Set includes the bottom seal and the strip that runs around the top and sides. Both pieces are mounted to the body of the vehicle and create a seal when the glass is pressed against the body.
Windshield Gasket
p/n: 70-2444-50
This Windshield Gasket mounts around the full perimeter of the front glass and has properly molded corners for a precise, factory fit.
Windshield Gasket
p/n: 20-1876-50
This windshield gasket is designed from the original part for superior fitment and seal. It also has the slot to accommodate the outer edge's decorative molding.
Swing-Out Windshield Weatherstrip
p/n: 40-0033-52
This Swing-Out Windshield Weatherstrip comes in an eleven (11') foot strip. The seal slides into the track (channel) attached to the glass that goes all the way around the windshield and creates a seal when the glass is pressed against the body of the vehicle.
Windshield Gasket
p/n: 70-2453-50
This Windshield Gasket is designed from the original part for superior fitment and seal. The gasket mounts around the full perimeter of the front glass and has vulcanized, or bonded, ends which means no cutting or splicing is required for installation.
Windshield Gasket with Groove
p/n: 20-0804-50
This Windshield Gasket with Groove mounts around the full perimeter of the front glass and has properly molded corners for a precise, factory fit. It also has the slot to accommodate the outer edge's decorative molding.
Windshield Gasket
p/n: 70-1717-50
This Windshield Gasket mounts around the full perimeter of the front glass and has properly molded corners for a precise, factory fit. It also has the slot to accommodate the outer edge's decorative molding.
Windshield Gasket without Groove
p/n: 20-0803-50
This Windshield Gasket without Groove mounts around the full perimeter of the front glass and has properly molded corners for a precise, factory fit. This seal does not have the slot to accommodate the outer edge's decorative chrome reveal molding.
Swing-Out Windshield Weatherstrip
p/n: 40-0036-52
This Swing-Out Windshield Weatherstrip comes in an eleven (11') foot strip. The seal slides into the track (channel) attached to the glass that goes all the way around the windshield and creates a seal when the glass is pressed against the body of the vehicle.