Swing-Out Windshield Weatherstrip
p/n: 40-0018-52
This Swing-Out Windshield Weatherstrip comes in an eleven (11) foot strip. The seal slides into the track (channel) attached to the glass that goes all the way around the windshield and creates a seal when the glass is pressed against the body of the vehicle.
Windshield Stanchion Base Pad
p/n: 50-0072-52
Pads, lower windshield post, approximately two and one half (2-1/2) inches square by one fourth (1/4) inch thick.Length: 2.5 inches. Width: 2.5 inches.
Windshield filler
p/n: 40-0318-52
Seal, windshield outer trim. Four (4) piece set for top and bottom of division post trim and for right and left lower corners of windshield panels.
Windshield Molding Set - Flexible Chrome
p/n: 20-0807-52
This five (5) piece Flexible Chrome Windshield Molding Set is designed from the original part for superior fitment and finish.
Windshield Frame To Body Weatherstrip
p/n: 20-2045-52
This Windshield Frame To Body Weatherstrip mounts around the full perimeter of the front glass and has properly molded corners for a precise, factory fit. For Ford 3-Window 2-Door Coupes ONLY.
Windshield Side Weatherstrips
p/n: 30-0074-52
This Windshield Side Weatherstrip pair is designed from the original part for superior fitment and seal. Windshield side, inner frame to windshield post, upper, fits dovetail slot in swinging glass frame.
Windshield Gasket
p/n: 19-0005-52
This Windshield Gasket comes in a four (4) foot strip and is for horizontally split windshields. The slot fits on the upper half and the projecting edge meets the lower half when the windshield is closed.
Windshield weatherstrip cap
p/n: 50-0104-52
End caps, for horizontally divided windshield weatherstrip, right and left, to seal ends of our #19-0005-52 weatherstrip that goes across windshield.
Windshield mounting pad
p/n: 60-0362-52
Pad, windshield side arm-to-cowl, right and left. Replaces #370356.
Windshield weatherstrip
p/n: 70-1535-52
Weatherstrip, windshield garnish molding on lower windshield post. Molded rubber replacement for #469222-3.
Windshield filler
p/n: 30-0105-52
Filler, windshield division channel ends, upper and lower. Two (2) piece set.
Folding Windshield Lower Frame Weatherstrip
p/n: 70-4809-52
This Folding Windshield Lower Frame Weatherstrip is designed from the original part for superior fitment and seal. This weatherstrip fits between the folding windshield and its lower frame.
Windshield Frame Weatherstrip
p/n: 20-2042-52
This Windshield Frame To Body Seal is made from the original design with quality materials for a precise, factory fit. This part installs around the perimeter of the windshield frame.
Windshield Frame Upper (Header) Weatherstrip
p/n: 70-4476-52
This Windshield Frame Upper (Header) Weatherstrip is designed from the original part for superior fitment and sealing. This windshield frame upper weatherstrips mounts to seal between the windshield frame and hardtop of the vehicle. Made of a high-quality EPDM rubber as the original.
Three Piece Windshield Reveal Molding With Metal
p/n: 70-4290-52
This Three Piece Windshield Reveal Molding is designed from the original part for superior fitment. This part fits across the top and on each side of the windshield. The part is made with top quality materials and with the proper molding profile for an exact fit and finish.
One-Piece Windshield Reveal Molding
p/n: 70-4289-52
This three (3) sided, One-Piece Windshield Reveal Molding is designed from the original part for superior fitment. This part fits across the top and on each side of the windshield. The part is made with top quality materials and with the proper molding profile for an exact fit and finish.
Windshield Frame To Cowl Weatherstrip
p/n: 70-3004-42
This Windshield Frame To Cowl Weatherstrip is designed from the original part for superior fitment and seal. This cowl rubber goes in between the windshield frame and cowl. This part also fits the 1952-1971 M38A1 model.
Windshield Weatherstrip
p/n: 70-0997-52
This Window Weatherstrip is made of a high-quality EPDM dense rubber extrusion. The weatherstrip is used for the upper scraper seal.
Removable Top Front Weatherstrip - On Metal Cab Roof
p/n: 70-3000-68
This Removable Top Front Weatherstrip is designed from the original part for superior fitment and sealing. This part fits on the rear of the metal cab roof and seals against the removable fiberglass top when the top is placed on the vehicle.
Windshield Trim To Glass Weatherstrips - Convertible
p/n: 70-4660-52
This Windshield Trim To Glass Weatherstrip pair for convertibles is designed from the original part for superior fitment, finish and function. These LH and RH windshield trim weatherstrips go between the windshield and the windshield molding.
Windshield Upper Reveal Molding
p/n: 70-4328-52
This Windshield Upper Reveal Molding is designed from the original part for superior fitment. This black molding fits across the top of the windshield. The part is made with top quality materials and with the proper molding profile for an exact fit and finish.
Windshield Frame To Body Weatherstrip
p/n: 20-2040-52
This Windshield Frame To Body Weatherstrip is designed from the original part for superior fitment and seal. This weatherstrip fits to the vehicle body to seal the crank in or out windshield.
Windshield Wiper Pivot Gaskets
p/n: 20-0808-53
This four (4) piece Windshield Wiper Pivot Gasket set is designed from the original part for superior fitment and seal. This reproduction gasket is die cut from original style EPDM rubber for an authentic fitment, finish and function.