Trunk Weatherstrip
p/n: 20-0302-84
This Trunk Weatherstrip is designed from the original part for superior fitment and seal. The decklid weatherstrip mounts around the full perimeter of the trunk directly to the body.
Chrome Mylar Locking Strip
p/n: 70-3425-52
This Chrome Mylar Locking Strip inserts into the weatherstrip to lock in the glass for the rear window. The strip is designed to be installed during glass replacement.
Windshield Frame To Cowl Weatherstrip
p/n: 70-3004-42
This Windshield Frame To Cowl Weatherstrip is designed from the original part for superior fitment and seal. This cowl rubber goes in between the windshield frame and cowl. This part also fits the 1952-1971 M38A1 model.
Chrome Bumper To Body Splash Shield Filler
p/n: 70-4858-47
This Chrome Bumper To Body Splash Shield Filler is designed from the original part for a superior fitment. This bumper filler is approximately fifty-eight and three-eighths (58-3/8") inches long and fits between the vehicle body and the chrome rear bumper.</p>
Push-Out Window Weatherstrip
p/n: 70-4038-81
This Push-Out Window Weatherstrip is for the side OR rear push-out windows. This outer gasket goes around the outside perimeter of the frame and seals against the van when the window is closed.
Trunk Weatherstrip
p/n: 82-0028-84
This Trunk Weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the trunk directly to the body.
Trunk Weatherstrip
p/n: 70-0773-84
This Trunk Weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the trunk directly to the body.
Roof To Quarter Panel Seals
p/n: 70-4012-68
This Roof To Quarter Panel Seal pair for both the left and right side, mount between the bedside quarter panel and the hardtop roof.
Accelerator Pedal Pad
p/n: 20-0678-40
Pedal, accelerator. Molded rubber design. Trucks (F100-200) after Serial #696,001.
Window Gasket Locking Strip - Chrome
p/n: 70-1919-52
This chrome appearing Window Gasket Locking Strip is designed from the original part for superior fitment and seal. Locking strip serves as the front or rear window gasket retainer. Sixteen (16') foot length single piece, one application, for complete coverage.
Engine Top Cover Weatherstrip
p/n: 70-3469-88
This Engine Top Cover Gasket is an original design reproduction made from top quality sponge rubber. This gasket attaches between the removable engine cover ("doghouse") and the vehicle firewall / floorboard.
Front Stabilizer Bar End Link Set
p/n: 70-2111-33
A twenty-two (22) piece Front Stabilizer Bar End Link set. Comes complete with fasteners, metal sleeves, metal cup washers and black rubber bushings. One (1) end link set for both sides of stabilizer bar on one (1) car.
Firewall to Hood Weatherstrip
p/n: 20-2760-42
This Firewall To Hood Weatherstrip is designed from the original part for superior fitment and seal. An exact reproduction of the original profile. This weatherstrip installs at the rear of the engine bay to seal between the hood and the vehicle firewall.
Trunk Weatherstrip
p/n: 70-3052-84
This Trunk Weatherstrip is designed from the original part for superior fitment and seal. The weatherstrip mounts around the full perimeter of the trunk directly to the body.
Trunk Weatherstrip
p/n: 70-0774-84
This Trunk Weatherstrip is designed from the original part for superior fitment and seal. The weatherstrip mounts around the full perimeter of the trunk directly to the body.
Fuel Neck Grommet
p/n: 70-2284-41
This Fuel Filler Neck Grommet is designed from the original part for superior fitment and seal. This grommet fits around the vehicles fuel filler neck between the filler neck and vehicle body. Fully molded out of gasoline resistant BUNA high quality rubber.
Splash Apron / A-Arm Dust Shield Fillers
p/n: 70-3483-45
This two (2) piece Splash Apron / A-Arm Dust Shield Filler pair is designed from the original part for superior fitment and seal. Filler pieces are die cut from quality masticated rubber to authentic original dimensions. Left and Right pieces fit over suspension a-arms and inside front inner fenders.
Splash Apron Fender Seal
p/n: 20-0877-44
This Splash Apron Fender Seal pair installs from the inner fender panel to the firewall. Made of high quality EPDM rubber and to the original design for a factory like fit.
Door Jamb Wire Loom Grommets
p/n: 70-4870-70
These Door Jamb Wire Loom Grommets go between the door and door jam and allow you to run wires or cables through them. They make great complements to power window kits, shaved door kits, or custom stereo installs.
Hood to Cowl Weatherstrip
p/n: 70-3924-43
This Hood to Cowl Weatherstrip has the proper rubber cross section and is made from top quality rubber to ensure durability and seal. Designed from the original part for a superior fitment and seal.
Firewall to Hood Weatherstrip - Cowl Lacing
p/n: 20-0790-42
This Firewall to Hood Weatherstrip is made of high quality EPDM dense rubber and to the original design for a factory like fit and appearance. Comes with pre-drilled mounting holes and mounting clips installed.
Splash Apron / A-Arm Dust Shield
p/n: 70-3058-45
This two (2) piece Splash Apron / A-Arm Dust Shield Filler set is designed from the original part for superior fitment and seal. Filler pieces are die cut from quality masticated rubber to authentic original dimensions. Pieces fit over suspension a-arms and inside front inner fenders.
Fender Welting
p/n: 20-1591-44
This black Fender Welting is designed from the original part for superior fitment and seal. This welting material fits between the fenders and the vehicle body. Eight (8) foot length.
Window Locking Strip - Black
p/n: 70-2195-52
This extruded Locking Strip is used to retain windshield gaskets in pickups and vans. Designed from the original part for superior fitment, finish and function. Available in 16ft lengths.
Brake and Clutch Pedal Pads
p/n: 70-3003-22
This reproduction Clutch and Brake Pedal Pad pair slips over the full perimeter of the brake pedal for a precise, factory fit. A square style direct fit reproduction to replace worn original pedal pads. Manufactured in black rubber.
Glass Run Channel - Vent Window Delete
p/n: 70-3891-58
This Glass Run Channel pair is for applications where the vent window has been eliminated. One pair fits both driver (Left) and passenger (Right) side doors.
Rear Leaf Spring Insulator
p/n: 70-0980-32
This Rear Leaf Spring Insulator is an exact replacement for the upper and lower spring pad. Two and one half (2-1/2) inches wide, with cloth reinforcement. Four (4) used per car.
Paint Reseal and Gasket Set
p/n: 70-4310-44
This Paint Reseal Gasket Set contains like original design reproductions for the vehicles specific exterior pieces. These reproductions are die-cut from quality materials to the original design for superior performance, durability, and a factory like fit.
Cowl to Fender Seals
p/n: 70-3340-43
This two (2) piece Cowl to Fender Seal pair is designed from the original part for superior fitment and seal. Fender seals are die cut from quality masticated rubber to authentic original dimensions.
Splash Apron / A-Arm Dust Shield Filler Set
p/n: 70-4670-45
This four (4) piece Splash Apron / A-Arm Dust Shield Filler set is designed from the original part for superior fitment and seal. Filler pieces are die-cut from quality masticated rubber to authentic original dimensions. Left and Right pieces fit over suspension a-arms and inside front inner fenders.
Firewall to Hood Weatherstrip
p/n: 70-3123-42
This Firewall to Hood Weatherstrip is designed from the original part for superior fitment and seal. An exact reproduction of the original profile. Installs with the pre-installed clips on the front edge of the cowl.
Windshield Wiper Pivot Gaskets
p/n: 20-0808-53
This four (4) piece Windshield Wiper Pivot Gasket set is designed from the original part for superior fitment and seal. This reproduction gasket is die cut from original style EPDM rubber for an authentic fitment, finish and function.
Taillight Lens Gaskets
p/n: 20-2667-15
This Taillight Lens Gasket pair is designed from the original part for superior fitment, finish and function. These reproduction gaskets fit between taillight lens and taillight housing.
Window Locking Strip - Black
p/n: 70-1918-52
This Window Locking Strip is designed from the original part for superior fitment and function. Front or rear window retainer made from top quality black EPDM rubber. Available in 15ft lengths.
Tailgate Drain Seals
p/n: 70-4007-84
This Tailgate Drain Seal pair includes right and left sides that install at the bottom of the tailgate. These seals are properly molded from originals for a factory like fit.
Inner Fender Splash / Dust Shield Set
p/n: 70-4669-45
This four (4) piece Inner Fender Splash / Dust Shield Set is designed from the original part for superior fitment and seal. Inner Fender pieces are die-cut from quality masticated rubber to authentic original dimensions. These pieces fit to the inner front fenders.
Fuel Tank Mounting Isolator Set
p/n: 70-4628-41
This six (6) piece Fuel Tank Mounting Isolator Set is a reproduction of the original style fuel tank isolator set. Replacing or adding the isolator strips and pads can help eliminate noise or friction between the fuel tank straps and the body.
Stabilizer Bar End Link Set
p/n: 60-0221-33
Twenty-two (22) piece Stabilizer Bar End Link set for both sides of one (1) vehicle, fits front or rear bar. Order two (2) sets for vehicles with front and rear stabilizer bars. Hex head bolt 3/8"-16 NF x 6-15/16" long. Comes with metal sleeve, metal cup washers and rubber grommets.
Kick Panel Hole Cover
p/n: 70-4536-45
This Kick Panel Hole Cover is designed from the original part for superior fitment and function. Cover is made from high-quality EPDM 80 durometer dense rubber to provide excellent durability and service.
Side Marker Light Gaskets
p/n: 70-4335-17
This Side Marker Light Gasket set is designed as a premium upgrade over the original part for superior fitment and a highly finished look. Fully molded gaskets installs between the side marker and body when not using a chrome bezel.
Firewall to Hood Weatherstrip
p/n: 70-3465-42
This Firewall to Hood Weatherstrip is designed from the original part for superior fitment and seal. An exact reproduction of the original profile made in sponge rubber. This weatherstrip installs at the rear of the engine bay to seal between the hood and the vehicle firewall.
Front Axle Bumper
p/n: 20-1577-33
This Front Axle Bumper is a quality reproduction of the original factory part. These bottoming bump stops are dense rubber blocks that mount with a stud to a front axle bracket.