Hood to Cowl Weatherstrip
p/n: 27-0096-42
Weatherstrip, hood to cowl.Length: 51.0 inches. Width: .6875 inches.
Hood To Cowl Weatherstrip
p/n: 70-3399-42
This Hood To Cowl Weatherstrip is designed from the original part for superior fitment and seal. An exact reproduction of the original profile. This weatherstrip installs at the rear of the engine bay to seal between the hood and vehicle body cowl.
Hood To Cowl Weatherstrip
p/n: 50-0501-43
This Hood To Cowl Weatherstrip is designed from the original part for superior fitment and seal. An exact reproduction of the original profile. This weatherstrip installs at the rear of the engine bay to seal between the hood and vehicle body cowl.
Hood to Cowl Weatherstrip
p/n: 70-2341-42
This Hood to Cowl Weatherstrip is designed from the original part for superior fitment and seal. A proper extrusion approximately sixty-two (62) inches long with pre-installed fastener clips.
Hood to Cowl Weatherstrip
p/n: 70-4280-43
This Hood to Cowl Weatherstrip is designed from the original part for superior fitment and seal. An exact reproduction of the original profile. This seal mounts at the rear of the engine bay to seal between the hood and vehicle body cowl.
Hood to Cowl Weatherstrip
p/n: 70-3350-42
This Hood to Cowl Weatherstrip is designed from the original part for superior fitment and seal. An exact reproduction using the correct profile dense rubber extrusion and pre-installed fastener clips.
Hood To Cowl Weatherstrips
p/n: 60-0428-42
This Hood To Cowl Weatherstrip pair is designed from original parts so it fits correctly. The pair comes ready to install with pre-punched holes.
Hood to Cowl Weatherstrip
p/n: 70-2389-43
This Hood to Cowl Weatherstrip is designed from the original part for superior fitment and seal. This weatherstrip mounts at the rear of the engine bay directly to the body. Proper rubber cross section with pre-inserted attaching clips.
Hood to Cowl Weatherstrip
p/n: 70-2388-43
This Hood to Cowl Weatherstrip is designed from the original part for superior fitment and seal. Proper rubber cross section extrusion with pre-installed attaching clips.
Hood to Cowl Weatherstrip
p/n: 70-1445-43
This Hood to Cowl Weatherstrip is designed from the original part for superior fitment and seal. This weatherstrip mounts at the rear of the engine bay to seal between the hood and vehicle body cowl.
Hood to Cowl Weatherstrip
p/n: 70-2732-43
This Hood to Cowl Weatherstrip mounts to firewall. A reproduction sponge rubber extrusion with correct molded ends for an authentic look and performance.
Hood to Cowl Fabric Lacing
p/n: 20-2022-43
This Hood To Cowl Fabric Lacing is designed from the original part for superior fitment and seal. This lacing attaches to the cowl at the rear of the engine bay to fit between the hood and cowl with hood closure.
Hood to Cowl Weatherstrip
p/n: 70-2219-43
This Hood to Cowl Weatherstrip is designed from the original part for superior fitment and seal. This six (6) long original profile extrusion provides complete coverage.
Hood To Cowl Weatherstrip
p/n: 82-0039-42
This Hood To Cowl Weatherstrip is designed from the original part for superior fitment and seal. An exact reproduction of the original profile. This weatherstrip installs at the rear of the engine bay to seal between the hood and vehicle body cowl.
Hood To Cowl Weatherstrip
p/n: 70-1253-42
This Hood To Cowl Weatherstrip is designed from the original part for superior fitment and seal. This weatherstrip mounts at the rear of the engine bay directly to the body. Seventy-two (72") inches OAL and includes fifteen (15) 70-1255-42 plastic clips for installation.
Hood To Cowl Weatherstrip
p/n: 70-3458-42
This Hood To Cowl Weatherstrip is designed from the original part for superior fitment and seal. An exact reproduction of the original profile. This weatherstrip installs at the rear of the engine bay to seal between the hood and vehicle body cowl.
Firewall To Hood Weatherstrip - Cowl Lacing
p/n: 20-1091-42
This Firewall To Hood Weatherstrip - Cowl Lacing mounts under the rear of the hood on the cowl panel. This is a die-cut extrusion with pre-installed clips as original.
Hood to Cowl Weatherstrip
p/n: 70-3120-43
Weatherstrip, hood to cowl side seals. Fully molded reproduction makes left and right.
Hood to Cowl Weatherstrip
p/n: 27-0075-42
This Hood to Cowl Weatherstrip mounts around the rear of the engine bay to seal between the hood and vehicle body cowl. The pair is twenty-one (21) inches in length and nine-sixteenths (9/16) inch in width to provide complete coverage.
Hood To Cowl Weatherstrip
p/n: 70-1640-43
This Hood To Cowl Weatherstrip is designed from the original part for superior fitment and seal. This 38-1/2” long x 11/16” wide weatherstrip provides complete coverage.
Firewall to Hood Weatherstrip - Cowl Lacing
p/n: 70-3374-42
This Firewall to Hood Weatherstrip - Cowl Lacing is designed from the original part for superior fitment and seal. Measuring 67-1/2” long x 1-1/4” wide to provide complete coverage.
Hood To Cowl Weatherstrip
p/n: 70-2236-43
This Hood To Cowl Weatherstrip is designed from the original part for superior fitment and seal. An exact reproduction of the original profile. This weatherstrip installs at the rear of the engine bay to seal between the hood and vehicle body cowl.
Hood To Cowl Weatherstrip
p/n: 70-3420-42
This Hood To Cowl Weatherstrip is designed from the original part for superior fitment and seal. An exact reproduction of the original profile. This weatherstrip installs at the rear of the engine bay to seal between the hood and vehicle body cowl.
Hood To Cowl Weatherstrip
p/n: 70-3023-43
This Hood To Cowl Weatherstrip attaches under cowl scuttle molding.
Hood to Cowl Weatherstrip
p/n: 30-0527-42
Weatherstrip, hood to cowl. Overall thirty seven (37) inches long.
Hood to Cowl Weatherstrip
p/n: 70-3146-42
This three (3) piece Hood To Cowl Weatherstrip is designed from the original part for superior fitment and seal. An exact reproduction of the original profile. This weatherstrip set installs at the rear of the engine bay to seal between the hood and vehicle body cowl.
Hood To Cowl Weatherstrip
p/n: 70-4991-43
This Hood To Cowl Weatherstrip is designed from the original part for superior fitment and seal. This weatherstrip installs at the rear of the engine bay to seal between the hood and vehicle body cowl.
Hood To Cowl Weatherstrip
p/n: 70-4992-43
This Hood To Cowl Weatherstrip is designed from the original part for superior fitment and seal. This weatherstrip installs at the rear of the engine bay to seal between the hood and vehicle body cowl.
Hood to Cowl Weatherstrip
p/n: 70-2722-43
This Hood to Cowl Weatherstrip is designed from the original part for superior fitment and seal. A reproduction using sponge rubber extrusion and pre-installed fastener clips.
Fabric Hood Lacing
p/n: 20-0354-42
This Fabric Hood Lacing installs where the hood rests on the cowl panel. Original woven style lacing complete with installation tacks. Sold as a forty-nine (49) inch strip.
Hood To Cowl Weatherstrip
p/n: 70-1751-43
This Hood To Cowl Weatherstrip is designed from the original part for superior fitment and seal. A reproduction using a sponge rubber extrusion and fastener clips.
Hood to Cowl Weatherstrip
p/n: 20-1090-42
This Hood to Cowl Weatherstrip is designed from the original part for superior fitment and seal. An exact reproduction seal with installation fastener clips included.
Hood to Cowl Weatherstrip
p/n: 20-0215-43
This Hood to Cowl Weatherstrip is designed from the original part for superior fitment and seal. An exact reproduction using the correct profile dense rubber extrusion.
Hood to Cowl Weatherstrip
p/n: 20-0216-43
This Hood to Cowl Weatherstrip is designed from the original part for superior fitment and seal. An exact reproduction of the original Ford part using dense rubber with pre-installed fastener clips.
Hood To Cowl Weatherstrip
p/n: 50-0486-43
This Hood To Cowl Weatherstrip is designed from the original part for superior fitment and seal. An exact reproduction of the original profile. This weatherstrip installs at the rear of the engine bay to seal between the hood and vehicle body cowl.
Hood to Cowl Dense Rubber Weatherstrip with Peel-N-Stick
1/4" x 3/4" inch Peel-N-Stick dense rubber cushion strip. Typically used for Hood To Cowl weatherstrip applications. Available in ten (10) or fifteen (15) feet lengths.
Hood to Cowl Weatherstrip
p/n: 60-0056-42
This Hood to Cowl Weatherstrip is extruded from a high quality dense rubber for a durable and proper seal. This seal mounts at the rear of the engine bay to seal between the hood and vehicle body cowl.
Hood to Cowl Weatherstrip
p/n: 70-4326-43
This Hood To Cowl Weatherstrip is designed from the original part for superior fitment and seal. This weatherstrip installs at the rear of the engine bay to seal between the hood and vehicle body cowl.
Hood to Cowl Weatherstrip
p/n: 60-0090-42
This Hood to Cowl Weatherstrip is extruded from a high quality dense rubber for a durable and proper seal. This pair comes with pre-drilled holes for easy installation.
Windshield Frame Cowl Gasket
p/n: 70-4738-43
This Windshield Frame Cowl Gasket is designed from the original part for superior fitment and seal. A fully molded reproduction of the original. This weatherstrip gasket installs at the lower windshield frame base.
Cowl Firewall Weatherstrip
p/n: 20-2021-43
This Cowl Firewall Weatherstrip is designed from the original part for superior fitment and seal. An exact reproduction with correct contours to seal out fumes and eliminate rattles.
Firewall to Hood Weatherstrip - Cowl Lacing
p/n: 20-1086-42
This Firewall To Hood Weatherstrip - Cowl Lacing is designed from the original part for superior fitment and seal. The weatherstrip is made of dense rubber and comes with pre-installed fastener clips.
Hood to Cowl Weatherstrip
p/n: 30-0233-42
Seal, hood to cowl. High quality closed cell sponge rubber construction as original.Width: .4375 inches. Height: .5625 inches.
Firewall To Hood Weatherstrip - Cowl Lacing
p/n: 20-1089-42
This Firewall To Hood Weatherstrip - Cowl Lacing is designed from the original part for superior fitment and seal. An exact reproduction using dense and sponge rubber extrusion with fasteners imbedded in place as original.
Hood to Cowl Sponge Rubber Weatherstrip with Peel-N-Stick
5/16" x 3/4" inch Peel-N-Stick sponge rubber cushioning strip. Typically used for hood to cowl applications. Available in ten (10) or fifteen (15) foot lengths.
Hood To Cowl Weatherstrip
p/n: 82-0067-43
This Hood To Cowl Weatherstrip is designed from the original part for superior fitment and seal. An exact reproduction of the original profile. This weatherstrip installs at the rear of the engine bay to seal between the hood and vehicle body cowl.
Hood To Cowl Weatherstrip
p/n: 50-0495-43
This Hood To Cowl Weatherstrip is designed from the original part for superior fitment and seal. This 48” long x 1-1/8” wide weatherstrip provides complete coverage.
Hood To Cowl Weatherstrip
p/n: 60-0153-42
This Hood To Cowl Weatherstrip is designed from the original part for superior fitment and seal. An exact copy reproduction of the original profile. This weatherstrip installs at the rear of the engine bay to seal between the hood and vehicle body cowl.
Hood to Cowl Weatherstrip
p/n: 60-0138-42
This Hood To Cowl Weatherstrip pair installs at the rear of the engine bay to seal between the hood and vehicle body cowl. Sold as a pair for left and right side.