Rear Leaf Spring Eye or Shackle Bushing
p/n: 30-0090-32
This Rear Leaf Spring Eye or Shackle Bushing is designed from the original part for an authentic fit, finish and function. For leaf spring shackle end or eye end rear leaf spring. Eight (8) required per car.
Rear Leaf Spring Insulator
p/n: 70-0191-32
This cloth reinforced Rear Leaf Spring Insulator fits two (2) inch wide leaf springs. Insulator installs to prevent metal to metal contact. Requires four (4) per vehicle.
Front or Rear Leaf Spring Shackle Bushing
p/n: 30-0076-32
A Front or Rear Leaf Spring Shackle Bushing made from quality Nitrile rubber for a precise, factory like fit. Shackle bushing fits at the front end of the front spring or the rear end of the rear spring. Made to OEM original standards. Sixteen (16) required per car.
Rear Leaf Spring Insulator
p/n: 70-0980-32
This Rear Leaf Spring Insulator is an exact replacement for the upper and lower spring insulator pad. Two and three-fourths (2-3/4) inches wide, with cloth reinforcement. Four (4) used per car.
Rear Leaf Spring Eye Bushing
p/n: 70-0589-32
A Rear Leaf Spring Eye Bushing made from quality EPDM rubber for a precise, factory like fit. Bushing fits at the front eye or the rear eye of the rear leaf spring.
Rear Leaf Spring Mounting Center Insulator Pad
p/n: 20-2984-32
This Rear Leaf Spring Mounting Center Insulator Pad is an exact replacement of the rear spring center mount rubber insulator block that mounts below the leaf spring. Four (4) required per vehicle.
Rear Leaf Spring Shackle Upper Bushing
p/n: 70-0444-32
This Rear Leaf Spring Shackle Upper Bushing is designed from the original part for superior fitment and function. Two bushings pushed together form one complete bushing. Four (4) required per car.
Rear Leaf Spring Mounting Center Insulator
p/n: 27-0010-35
This Rear Leaf Spring Mounting Center Insulator is an exact replacement of the rear spring center mount rubber insulator block that mounts below the leaf spring. Four (4) required per vehicle. Fits one and three fourths (1-3/4") inch wide leaf springs.
Leaf Spring Clamp Liner Set
p/n: 20-1272-32
A six (6) piece Leaf Spring Clamp Liner Set molded with durable EPDM rubber. These liners are used on Front and / or Rear Leaf Springs on the Driver's or Passenger side.
Rear Leaf Spring Mounting Center Insulator
p/n: 20-2733-32
This Rear Leaf Spring Mounting Center Insulator is an exact replacement of the rear spring center mount rubber insulator block that mounts below the leaf spring. Four (4) required per vehicle. Fits 2-1/2" leaf spring.
Stabilizer Bar or Spring Bushing
p/n: 11-0020-35
This fully molded rubber Stabilizer or Spring Bushing is designed from the original part for superior fitment and function.
Rear coil spring pad
p/n: 50-0304-35
Insulator, rear coil spring clamp bolt (upper end). Two (2) per car. Fabric reinforced rubber as original.
Radius Arm Bushing
p/n: 20-0671-36
This Radius Arm Bushing is a quality reproduction of the original factory part. The bushing fits at the frame end of the radius rod on 4-Wheel Drive models. Requires two (2) bushings per side with four (4) total per vehicle.
Torsion bar bushing
p/n: 20-0670-36
Bushing, front radius rod. Front and rear. Four (4) required per Truck.
Rear Leaf Spring Insulator Pad
p/n: 30-0452-32
This reproduction Rear Leaf Spring Insulator Pad is designed from the original part for an authentic fit, finish, and function. May use up to eight (8) per car.
Front Coil Spring Insulator
p/n: 20-0203-32
This Front Coil Spring Insulator is designed from the original part for superior fitment, finish, and function. This coil spring insulator installs to prevent metal to metal contact at the top and bottom of the coil spring mounting points.
Spring Shackle Bushing Set
p/n: 20-2481-33
This Spring Shackle Bushing Set is for the front of the rear leaf spring. Two (2) kits required per car.
Rear Leaf Spring or Shackle Bushing
p/n: 60-0208-32
This Rear Leaf Spring Eye or Shackle Eye Bushing is designed from the original part for superior fitment and function. Bushing is for the rear spring shackle eye and leaf spring eye. Up to twelve (12) per car.
Rear Leaf Spring or Shackle Bushing
p/n: 70-0182-32
This Rear Leaf Spring or Shackle Bushing is designed from the original part for superior fitment and function. Bushing is for the rear leaf spring front or rear spring to shackle. Two bushings pushed together form one complete bushing.
Spring eye bushing
p/n: 10-0131-35
Bushing, spring eye, both eye leaf and shackle. Front and rear.Qty Required:20 Twelve (12) required per front, eight (8) required per rear.
Front or Rear Leaf Spring Shackle Bushing
p/n: 40-0183-32
A Front or Rear Leaf Spring Shackle Bushing made from quality EPDM rubber for a precise, factory like fit. Shackle bushing fits at the front end of the front spring or the rear end of the rear spring. Eight (8) or twelve (12) required per car.
Rear Spring Thrust Washer
p/n: 40-0526-32
This "Silent Block" Rear Spring Thrust Washer is designed from the original part for superior fitment and function. Precision die-cut from top quality dense rubber for durability.
Rear Spring Anti-Squeak Pad
p/n: 20-1275-32
This Rear Spring Anti-Squeak Pad is used as a spring insert silencer. This leaf spring insulator installs between the leaves.
Rear Spring Shackle Rubber Bushing
p/n: 60-0236-48
This Rear Spring Shackle Rubber Bushing is designed from the original part for an authentic fit, finish and function. Bushing fits left or right-hand side and upper or lower spring eye.
Rear Spring Thrust Washer
p/n: 40-0525-32
This "Silent Block" Rear Spring Thrust Washer is designed from the original part for superior fitment and function. Precision die-cut from top quality dense rubber for durability.
Spring Shackle Pin Neoprene Washer
p/n: 70-1125-33
This Spring Shackle Pin Neoprene Washer is designed from the original part for superior fitment and function. Rubber washer fits the front and or rear spring shackle pin. Constructed of neoprene rubber.
Spring Shackle Seal - Bijur Lubrication
p/n: 30-0434-32
For models with Bijur lubrication systems, this reproduction Spring Shackle Seal is designed for an authentic fit, finish, and appearance.
Rear Leaf Spring Separator Insulator Pad
p/n: 30-0370-32
Rear Leaf Spring Separator Insulator Pads are used between the individual rear leaf springs to reduce metal to metal contact. Use as required. Up to twenty-four (24) pads needed per car.
Spring Shackle or Shock Absorber Link Bushing
p/n: 20-1274-32
This Bushing is manufactured to OEM specifications to install for an authentic fit, finish and function. Used for front or rear leaf spring on Ford models. Used as a rubber, shock absorber link bushing on Chrysler models.
