Spring Shackle or Shock Absorber Link Bushing
p/n: 20-1274-32
This Bushing is manufactured to OEM specifications to install for an authentic fit, finish and function. Used for front or rear leaf spring on Ford models. Used as a rubber, shock absorber link bushing on Chrysler models.
Rear Leaf Spring Separator Insulator Pad
p/n: 30-0370-32
Rear Leaf Spring Separator Insulator Pads are used between the individual rear leaf springs to reduce metal to metal contact. Use as required. Up to twenty-four (24) pads needed per car.
Spring Shackle Seal - Bijur Lubrication
p/n: 30-0434-32
For models with Bijur lubrication systems, this reproduction Spring Shackle Seal is designed for an authentic fit, finish, and appearance.
Spring Shackle Pin Neoprene Washer
p/n: 70-1125-33
This Spring Shackle Pin Neoprene Washer is designed from the original part for superior fitment and function. Rubber washer fits the front and or rear spring shackle pin. Constructed of neoprene rubber.
Rear Spring Anti-Squeak Pad
p/n: 20-1275-32
This Rear Spring Anti-Squeak Pad is used as a spring insert silencer. This leaf spring insulator installs between the leaves.
Rear Spring Thrust Washer
p/n: 40-0525-32
This "Silent Block" Rear Spring Thrust Washer is designed from the original part for superior fitment and function. Precision die-cut from top quality dense rubber for durability.
Rear Spring Shackle Rubber Bushing
p/n: 60-0236-48
This Rear Spring Shackle Rubber Bushing is designed from the original part for an authentic fit, finish and function. Bushing fits left or right-hand side and upper or lower spring eye.
Rear Spring Thrust Washer
p/n: 40-0526-32
This "Silent Block" Rear Spring Thrust Washer is designed from the original part for superior fitment and function. Precision die-cut from top quality dense rubber for durability.
Front or Rear Leaf Spring Shackle Bushing
p/n: 40-0183-32
A Front or Rear Leaf Spring Shackle Bushing made from quality EPDM rubber for a precise, factory like fit. Shackle bushing fits at the front end of the front spring or the rear end of the rear spring. Eight (8) or twelve (12) required per car.
Spring eye bushing
p/n: 10-0131-35
Bushing, spring eye, both eye leaf and shackle. Front and rear.Qty Required:20 Twelve (12) required per front, eight (8) required per rear.
Rear Leaf Spring or Shackle Bushing
p/n: 70-0182-32
This Rear Leaf Spring or Shackle Bushing is designed from the original part for superior fitment and function. Bushing is for the rear leaf spring front or rear spring to shackle. Two bushings pushed together form one complete bushing.
Rear Leaf Spring or Shackle Bushing
p/n: 60-0208-32
This Rear Leaf Spring Eye or Shackle Eye Bushing is designed from the original part for superior fitment and function. Bushing is for the rear spring shackle eye and leaf spring eye. Up to twelve (12) per car.
Front Coil Spring Insulator
p/n: 20-0203-32
This Front Coil Spring Insulator is designed from the original part for superior fitment, finish, and function. This coil spring insulator installs to prevent metal to metal contact at the top and bottom of the coil spring mounting points.
Spring Shackle Bushing Set
p/n: 20-2481-33
This Spring Shackle Bushing Set is for the front of the rear leaf spring. Two (2) kits required per car.
Rear Leaf Spring Insulator Pad
p/n: 30-0452-32
This reproduction Rear Leaf Spring Insulator Pad is designed from the original part for an authentic fit, finish, and function. May use up to eight (8) per car.
Torsion bar bushing
p/n: 20-0670-36
Bushing, front radius rod. Front and rear. Four (4) required per Truck.
Radius Arm Bushing
p/n: 20-0671-36
This Radius Arm Bushing is a quality reproduction of the original factory part. The bushing fits at the frame end of the radius rod on 4-Wheel Drive models. Requires two (2) bushings per side with four (4) total per vehicle.
Rear coil spring pad
p/n: 50-0304-35
Insulator, rear coil spring clamp bolt (upper end). Two (2) per car. Fabric reinforced rubber as original.
Spring or Stabilizer Bushing
p/n: 11-0020-35
Bushing, spring bracket on frame (Auburn and Cord 810 & 812). Also used as a grommet, front stabilizer bar (Graham models 116 & 120). Fully molded rubber.
Leaf Spring Clamp Liner Set
p/n: 20-1272-32
A six (6) piece Leaf Spring Clamp Liner Set molded with durable EPDM rubber. These liners are used on Front and / or Rear Leaf Springs on the Driver's or Passenger side.
Rear Leaf Spring Mounting Center Insulator Pad
p/n: 20-2733-32
This Rear Leaf Spring Mounting Center Insulator Pad is an exact replacement of the rear spring center mount rubber insulator block that mounts below the leaf spring. Four (4) required per vehicle. Fits 2-1/2" leaf spring.
Rear Spring Pad
p/n: 27-0010-35
Pad, rear spring insulator for one and three fourths (1-3/4") inch wide springs. Four (4) per vehicle.
Rear Leaf Spring Shackle Upper Bushing
p/n: 70-0444-32
This Rear Leaf Spring Shackle Upper Bushing is designed from the original part for superior fitment and function. Two bushings pushed together form one complete bushing. Four (4) required per car.
Rear Leaf Spring Mounting Center Insulator Pad
p/n: 20-2984-32
This Rear Leaf Spring Mounting Center Insulator Pad is an exact replacement of the rear spring center mount rubber insulator block that mounts below the leaf spring. Four (4) required per vehicle.
Rear Leaf Spring Eye Bushing
p/n: 70-0589-32
A Rear Leaf Spring Eye Bushing made from quality EPDM rubber for a precise, factory like fit. Bushing fits at the front eye or the rear eye of the rear leaf spring.
Rear Leaf Spring Insulator
p/n: 70-0980-32
This Rear Leaf Spring Insulator is an exact replacement for the upper and lower spring insulator pad. Two and three-fourths (2-3/4) inches wide, with cloth reinforcement. Four (4) used per car.
Front or Rear Leaf Spring Shackle Bushing
p/n: 30-0076-32
A Front or Rear Leaf Spring Shackle Bushing made from quality Nitrile rubber for a precise, factory like fit. Shackle bushing fits at the front end of the front spring or the rear end of the rear spring. Made to OEM original standards. Sixteen (16) required per car.
Rear Leaf Spring Insulator
p/n: 70-0191-32
This cloth reinforced Rear Leaf Spring Insulator fits two (2) inch wide leaf springs. Insulator installs to prevent metal to metal contact. Requires four (4) per vehicle.
Rear Leaf Spring Eye or Shackle Bushing
p/n: 30-0090-32
This Rear Leaf Spring Eye or Shackle Bushing is designed from the original part for an authentic fit, finish and function. For leaf spring shackle end or eye end rear leaf spring. Eight (8) required per car.
Rear Leaf Spring Shackle Assembly
p/n: 20-1834-32
This Rear Leaf Spring Shackle Assembly is for the rear of the rear leaf spring on car models and the front of the front leaf spring on truck models. Two (2) sets needed per vehicle.
Rear Leaf Spring Shackle Bushing
p/n: 30-0420-32
This Rear Leaf Spring Shackle Bushing is designed from the original part for superior fitment and function. Six (6) per car. Packard's "self-flanging" type.
Rear Leaf Spring Insulator
p/n: 70-0245-32
This cloth reinforced Rear Leaf Spring Insulator fits two and one fourth (2-1/4) inch wide leaf springs. Insulator installs to prevent metal to metal contact. Requires four (4) per vehicle.
Rear Leaf Spring Eye Bushing
p/n: 70-0588-32
A Rear Leaf Spring Eye Bushing made from quality EPDM rubber for a precise, factory like fit. Bushing fits at the front eye of the rear leaf spring. Four (4) per car.
Front coil spring pad
p/n: 50-0358-35
Insulators, front coil spring. Fabric reinforced rubber as original.
Rear Leaf Spring Shackle Assembly
p/n: 20-1066-32
This reproduction Rear Leaf Spring Shackle Assembly is complete with shackle bar plates, rubber bushings and lock nuts. For fitting the suspension leaf spring at its rear spring eye to the vehicle body. Two (2) sets required per car.
Rear Leaf Spring Eye or Shackle Bushing
p/n: 11-0014-32
This Rear Leaf Spring Eye or Shackle Bushing is designed from the original part for an authentic fit, finish and function. Bushing is 1-1/2" barrel diameter with 1/2" inside diameter hole. Replaces factory / Harris #998.
Rear Leaf Spring Eye Bushing
p/n: 30-0091-32
This Rear Leaf Spring Eye Bushing is designed from the original part for an authentic fit, finish and function. For the front eye of the rear leaf spring. Eight (8) required per car.
Rear Leaf Spring Insulator
p/n: 70-2080-32
This Rear Leaf Spring Insulator is an exact replacement for the upper and lower spring insulator pad. Two and seven-eights (2-7/8) inches wide, with cloth reinforcement. Order four (4) per vehicle.
Front or Rear Leaf Spring Eye Bushing
p/n: 30-0081-32
A Front or Rear Leaf Spring Eye Bushing made from quality Nitrile rubber for a precise, factory like fit. Bushing fits at the rear of the front spring or the front of the rear spring.
Torsion bar bushing
p/n: 20-0667-36
Bushing, front axle pivot. Two (2) required per Truck. Twin I Beam suspension.
Rear Leaf Spring Shackle Assembly
p/n: 20-2731-32
This Rear Leaf Spring Shackle Assembly is for the rear of the rear leaf spring. Designed from original parts for a precise, factory fit. Two (2) sets required per car.
Spring Shackle Bushing Set
p/n: 20-0035-33
This Spring Shackle Bushing Set is an original style rubber leaf spring bushing used on the front of rear spring. One (1) set is required per spring.
Front Coil Spring Insulators
p/n: 40-0457-32
This upper or lower Front Coil Spring Insulator pair is designed from the original part for superior fitment, finish, and function. The coil spring insulator installs to prevent metal to metal contact at the top or bottom of the coil spring mounting points.
Leaf Spring Bushing and Bolt Set
p/n: 20-1836-32
This Leaf Spring Bushing and Bolt Set is for the front of the rear leaf spring. Includes Bushing, Bolt, and Self-Locking Nut.