Steele Rubber Products

Stabilizer Bar Bushing Set

p/n: 20-1841-33

This twenty-six (26) piece Stabilizer Bar Bushing Set for the front is used to allow the rod to flex and rotate, but stays in place where it is attached to the vehicle frame.

$239.59/set

Ships in 2-3 Weeks

Stabilizer Bar Frame Bushing Set

p/n: 20-1842-33

This twenty-six (26) piece Stabilizer Bar Frame Bushing Set is for the front and allows the rod to flex and rotate, but stays in place where it is attached to the vehicle frame.

$239.59/set

Ships in 2-3 Weeks

Shock and stabilizer seal

p/n: 70-1185-33

Seals, shock absorber and rear stabilizer link. Eight (8) piece set.

$163.89/set

Made to Order Takes 5-7 Days

Front Stabilizer Bar Link Assembly

p/n: 20-0945-33

This Front Stabilizer Bar Link Assembly helps to maintain the camber angle of the inner wheel to control motion. Two (2) required per truck. For 2 W/D (wheel drive).

$150.99/ea.

Ships in 2-3 Weeks

Front Stablizer Bar End Link Kit

p/n: 70-0574-33

Kit, front stabilizer bar link assembly replacement. Twenty two (22) piece set for both sides of one (1) car. Hex head bolt. 3/8"-16nc x 8-7/8" lg. Comes with metal sleeve, metal cup washers and rubber grommets.

$146.99/set

In Stock

Shock and Stabilizer Seal

p/n: 70-1184-33

Seals, shock absorber and rear stabilizer link. Eight (8) piece set. Width: 1.1875 inches.

$124.29/set

In Stock

Stabilizer Bushing

p/n: 30-0483-33

Bearings, stabilizer rear rod. Requires two (2) per car. Fully molded rubber.

$116.79/pr.

Made to Order Takes 5-7 Days

Stabilizer Bushing

p/n: 30-0484-33

Bearings, stabilizer front rod. Requires two (2) per car. Fully molded rubber.

$112.59/pr.

Made to Order Takes 5-7 Days

Stabilizer Bushing

p/n: 60-0316-34

Bushing, front stabilizer shaft. Two (2) per car.Length: 1.875 inches. Width: 1.6875 inches. Height: 1.4375 inches.

$100.99/pr.

Made to Order Takes 5-7 Days

Stabilizer Bushing

p/n: 70-0627-33

Bushings, stabilizer bar, front. Fully molded rubber. One and three fourths inch (1 3/4") length by one and one half inch (1 1/2") width by three fourths inch (3/4") inside hole diameter by one and five eighths inch (1 5/8") height.

$96.39/pr.

In Stock

Front Stabilizer Bar Bushings

p/n: 27-0014-34

Front Stabilizer Bar to Frame Bushing pair for both sides of the vehicle. Each bushing measures 2-1/8 x 11/16 x 1-11/16 inches.

$95.89/pr.

Made to Order Takes 5-7 Days

Front Stabilizer Bushing

p/n: 50-0227-34

Bushing, front stabilizer shaft bracket. Two (2) per car.

$95.89/pr.

Made to Order Takes 5-7 Days

Front Stabilizer Bushing

p/n: 70-0348-33

Bushings, front stabilizer bar mounting. Fully molded rubber. One and thirteen sixteenths inch (1 13/16") length by one and three eighths inch (1 3/8") width by eleven sixteenths inch (11/16") inside hole diameter by one and one half inch (1 1/2") height.

$90.19/pr.

Made to Order Takes 5-7 Days

Rear Stabilizer Bushing

p/n: 70-0406-33

Bushings, rear stabilizer. Comes as a four (4) piece set. Fully molded rubber.

$87.79/set

In Stock

Front Stabilizer Bar Bushing

p/n: 70-1293-33

A Front Stabilizer Bar to Frame Bushing pair for both sides of the vehicle. Fits front stabilizer or sway bar. Manufactured with quality materials to original specifications. One (1) pair per vehicle.

$83.29/pr.

Made to Order Takes 5-7 Days

Front Stabilizer Bushing

p/n: 70-0193-33

Bushings, front stabilizer bar. Fully molded rubber. One and five eighths inch (1 5/8") length by one and seven sixteenths inch (1 7/16') width by three fourths inch (3/4") inside hole diameter by one and eleven sixteenths inch (1 11/16") height.

$82.69/pr.

In Stock

Stabilizer Bar End Link Set

p/n: 70-0567-34

Twenty-two (22) piece Stabilizer Bar End Link set for both sides of one (1) vehicle, fits front or rear bar. Order two (2) sets for vehicles with front and rear stabilizer bars. Hex head bolt. 5/16"-24NF x 7-5/8" long. Includes metal sleeves, cup washers and rubber grommets.

$81.89/set

In Stock

Front Stabilizer Bushing

p/n: 50-0170-34

Bushings, front stabilizer bar mounting. Fits original bracket. Fully molded rubber. One and five eighths inch (1 5/8") length by one and three eighths inch (1 3/8") outside diameter by eleven sixteenths inch (11/16") inside hole diameter.

$81.49/pr.

Made to Order Takes 5-7 Days

Rear Stabilizer Bushing

p/n: 50-0171-34

Bushings, rear stabilizer bar mounting. Fully molded rubber. One and one half inch (1 1/2") length by one and one fourth inch (1 1/4" outside diameter by nine sixteenths inch (9/16") inside hole diameter.

$81.49/pr.

Made to Order Takes 5-7 Days

Front Stabilizer Bushing

p/n: 30-0363-33

Bearings or bushings, front stabilizer rod. One (1) pair used per vehicle. Fully molded rubber.

$81.19/pr.

Made to Order Takes 5-7 Days

Track Bar Bushing

p/n: 50-0527-34

Bushing, track bar. Molded out of BUNA rubber with correct metal sleeve like original.Height: 1.875 inches.

$80.39/pr.

Made to Order Takes 5-7 Days

Front Stabilizer Bushing

p/n: 70-0717-33

Bushing, front stabilizer bar to frame.Length: 1.875 inches. Width: .6875 inches. Height: 1.625 inches.

$79.99/pr.

Made to Order Takes 5-7 Days

Stabilizer Bushing

p/n: 50-0520-34

Bushing, stabilizer bracket. Constructed of durable BUNA rubber. One and five eighths inch (1 5/8") length by one and one half inch (1 1/2") outside diameter by three fourths inch (3/4") inside hole diameter.

$76.49/pr.

Made to Order Takes 5-7 Days

Front Stabilizer Bushing

p/n: 30-0123-33

Bushings, front stabilizer mounting bracket. Fully molded rubber.

$74.89/pr.

In Stock

Stabilizer Bar To Frame Bushing Set

p/n: 20-1844-33

This four (4) piece Stabilizer Bar To Frame Bushing Set mounts on the sway bar to frame. Bushings can crack, dry out, and harden resulting in squeaks.

$73.19/set

Ships in 5-7 Days

Stabilizer Bar Bushings

p/n: 27-0085-34

A Front Stabilizer Bar to Frame Bushing pair for both sides of the vehicle. Manufactured with quality materials to original specifications.

$72.59/pr.

In Stock

Front Stabilizer Bushing

p/n: 30-0298-33

Bushings, front stabilizer rod end. One (1) pair required per car. Fully molded rubber.

$71.49/pr.

In Stock

Stabilizer Bar Bushing Set

p/n: 20-1717-33

This four (4) piece Stabilizer Bar Bushing set is designed from the original part for superior fitment and function. These are the stabilizer bar to frame mounting bushings.

$71.49/set

Ships in 2-3 Weeks

Front Stabilizer Bushing

p/n: 27-0057-34

Bushing, front stabilizer bar to frame. Two (2) per car.

$68.99/pr.

In Stock

Sway Bar Bushing

p/n: 30-0285-33

Bushing, sway bar (stabilizer lateral tube). Two (2) used per car. Fully molded rubber. Two and three sixteenths inch (2 3/16") length by one and one half inch (1 1/2") outside diameter by five eighths inch (5/8") inside hole diameter.

$66.59/ea.

Made to Order Takes 5-7 Days

Front Stabilizer Bushing

p/n: 50-0094-34

Bushings, front stabilizer shaft-to-frame or stabilizer shaft, front or rear. Fully molded rubber.

$65.79/pr.

In Stock

Stabilizer bushing

p/n: 20-1846-33

Bushings, stabilizer to frame.

$62.29/pr.

Ships in 2-3 Weeks

Front Stabilizer Bushing

p/n: 60-0088-34

This Front Stabilizer Bushing pair is fully molded from EPDM dense rubber to ensure durability. Used to connect the stabilizer bar to the vehicle frame. Two (2) required per car.

$61.29/pr.

Made to Order Takes 5-7 Days

Stabilizer bushing

p/n: 20-1845-33

Bushings, stabilizer to frame. Two (2) piece set.

$58.99/pr.

Ships in 2-3 Weeks

Stabilizer Bar End Link

p/n: 20-0782-33

This Front Stabilizer Bar End Link is used to smooth the transfer between the sway bar and the control arm. Two (2) end links required per truck. For 4x2 (2 wheel drive) models.

$49.49/ea.

Ships in 2-3 Weeks

Stabilizer Bar End Link Repair Set

p/n: 20-1294-33

This eleven (11) piece Stabilizer Bar End Link Repair Set is designed to withstand harsh conditions without deteriorating. Two (2) end link sets required per car.

$46.89/set

Ships in 2-3 Weeks

Stabilizer Bar End Link Repair Set

p/n: 20-0783-33

This five (5) piece Stabilizer Bar End Link Repair Set is for the front or rear stabilizer bar. Two (2) per set. Used on Front for 1975-1979 F150-F350 series 4x2. Used on Rear for 1980-1989 F100-F350 series.

$44.39/set

Ships in 2-3 Weeks

Front Stabilizer Bushing

p/n: 20-1579-33

Bushings, stabilizer bar. Front.

$43.69/pr.

Ships in 2-3 Weeks

Front Stabilizer Bar End Link Set

p/n: 70-2111-33

A twenty-two (22) piece Front Stabilizer Bar End Link set. Comes complete with fasteners, metal sleeves, metal cup washers and black rubber bushings. One (1) end link set for both sides of stabilizer bar on one (1) car.

$41.29/pr.

In Stock

Stabilizer Shaft Link Bushing

p/n: 60-0317-33

This Stabilizer Shaft Link Bushing works to support the vehicle front stabilizer or sway bar shaft. Six (6) required per vehicle.

$40.79/ea.

In Stock

Front Stabilizer Bar End Link Set

p/n: 70-2110-33

$40.29/pr.

In Stock

Front Stabilizer Bar End Link Set

p/n: 70-2109-33

$37.99/set

In Stock

Stabilizer Bar End Link Set

p/n: 60-0221-33

Twenty-two (22) piece Stabilizer Bar End Link set for both sides of one (1) vehicle, fits front or rear bar. Order two (2) sets for vehicles with front and rear stabilizer bars. Hex head bolt 3/8"-16 NF x 6-15/16" long. Comes with metal sleeve, metal cup washers and rubber grommets.

$28.99/set

In Stock

Shock and Sway Bar Grommet

p/n: 30-0193-33

Grommet, rear shock arm link (lower end), or rear sway bar link lower end. Shock arms used four (4) per car. If needed, sway bar used two (2) per car. Fully molded rubber.

$28.59/ea.

In Stock

Front Stabilizer Bushing

p/n: 20-1578-33

Bushings, stabilizer bar. Front.

$27.79/pr.

Ships in 2-3 Weeks

Spring or Stabilizer Bushing

p/n: 11-0020-35

Bushing, spring bracket on frame (Auburn and Cord 810 & 812). Also used as a grommet, front stabilizer bar (Graham models 116 & 120). Fully molded rubber.

$25.99/ea.

In Stock

Stabilizer bushing

p/n: 20-1295-33

Bushings, stabilizer bar to frame. One (1) pair required per car.

$25.59/pr.

Ships in 2-3 Weeks

Stabilizer Bar Bushings

p/n: 70-4678-34

This Stabilizer Bar to Frame Bushing pair may fit either front or rear stabilizer / sway bars depending on the vehicle. Manufactured with quality materials to original specifications.

$24.79/pr.

In Stock

Stabilizer Bar End Link Repair Set

p/n: 20-1068-33

This eleven (11) piece Stabilizer Bar End Link Repair Set is designed to withstand harsh conditions without deteriorating. Two (2) end link sets required per car.

$24.29/set

Ships in 2-3 Weeks

Stabilizer Grommet

p/n: 70-0221-33

Grommet, rear stabilizer bar (angular sway bar). Four (4) required per car. Fully molded rubber.

$22.99/ea.

In Stock

Rear Stabilizer Bushing

p/n: 70-1967-33

Bushing, rear stabilizer. Four (4) are required per car. Fully molded rubber. One and one half inch (1 1/2") outside diameter by five eighths inch (5/8") inside hole diameter by seven eighths inch (7/8") height.

$21.69/ea.

In Stock

Radius or Panhard Rod Bushing

p/n: 50-0303-35

This rear axle Radius or Panhard Rod Bushing is a quality reproduction of the original factory part. A fully molded rubber bushing that works to cushion road vibration at the rod end. Four (4) required per car.

$21.19/ea.

Made to Order Takes 5-7 Days

Stabilizer Grommet

p/n: 70-0436-33

Grommet, front stabilizer bar link or rear shock link to axle. Fully molded rubber. Eight (8) required per car.

$18.39/ea.

In Stock

Front Stabilizer Bar End Link Set

p/n: 20-0037-33

This eleven (11) piece Front Stabilizer Bar End Link Set is designed from original parts so it fits correctly. Two (2) kits / sets required per car as one (1) kit / set services one side of front stabilizer bar.

$17.99/set

Ships in 2-3 Weeks

Rear Stabilizer Bushing

p/n: 70-0905-33

Bushing, rear stabilizer ends. Four (4) required per car. Fully molded rubber.

$17.99/ea.

In Stock

Shock and Sway Bar Bushing

p/n: 11-0016-33

Bushing, various uses. Fully molded rubber. One and one fourth inch (1 1/4") outside diameter by one half inch (1/2") inside hole diameter by three fourths inch (3/4") height. Shocks: 8 per car. Sway bar: 4 per car.

$17.89/ea.

In Stock

Stabilizer Grommet

p/n: 30-0310-33

Grommet, front or rear stabilizer links, lower. Fully molded rubber.

$17.39/ea.

In Stock

Axle Rebound Pad

p/n: 50-0302-35

Bushing, rear axle, anti-sway rod ends. Fully molded rubber. Four (4) required per car.

$14.99/ea.

In Stock

Stabilizer Grommet

p/n: 30-0406-33

Pad, stabilizer link assembly, front, in upper end at link. Four (4) used per car. Fully molded rubber. One inch (1") outside diameter by three sixteenths inch (3/16") inside hole diameter by three fourths inch (3/4") height.

$11.69/ea.

In Stock